References
- C. Borri, M. Paggi, J. Reinoso, and F.M. Borodich, Adhesive behaviour of bonded paper layers: Mechanical testing and statistical modelling, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 230, no. 9, pp. 1440–1448, 2016. DOI: https://doi.org/10.1177/0954406215612502.
- M. Corrado and M. Paggi, Nonlinear fracture dynamics of laminates with finite thickness adhesives, Mech Mater., vol. 80, pp. 183–192, 2015. DOI: https://doi.org/10.1016/j.mechmat.2014.07.012.
- A. Rahmani and N. Choupani, Experimental and numerical analysis of fracture parameters of adhesively bonded joints at low temperatures, Eng. Fract. Mech., vol. 207, pp. 222–236, 2019. DOI: https://doi.org/10.1016/j.engfracmech.2018.12.031.
- S. Sun, M. Li, and A. Liu, A review on mechanical properties of pressure sensitive adhesives, Int. J. Adhes. Adhes., vol. 41, pp. 98–106, 2013. DOI: https://doi.org/10.1016/j.ijadhadh.2012.10.011.
- H. Zarei, T. Brugo, J. Belcari, H. Bisadi, G. Minak, and A. Zucchelli, Low velocity impact damage assessment of GLARE fiber-metal laminates interleaved by Nylon 6,6 nanofiber mats, Compos. Struct., vol. 167, pp. 123–131, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.01.079.
- S.V. Nimje and S.K. Panigrahi, Interfacial failure analysis of functionally graded adhesively bonded double supported tee joint of laminated FRP composite plates, Int. J. Adhes. Adhes., vol. 58, pp. 70–79, 2015. DOI: https://doi.org/10.1016/j.ijadhadh.2015.01.002.
- L.F. Kawashita, D.R. Moore, and J.G. Williams, Protocols for the measurement of adhesive fracture toughness by peel tests, J. Adhes., vol. 82, no. 10, pp. 973–995, 2006. DOI: https://doi.org/10.1080/00218460600876142.
- Y. Wei and J.W. Hutchinson, Interface strength, work of adhesion and plasticity in the peel test, Int. J. Fract., vol. 93, no. 1/4, pp. 315–333, 1998. DOI: https://doi.org/10.1007/978-94-017-2854-6_16.
- J. Kim, K.S. Kim, and Y.H. Kim, Mechanical effects in peel adhesion test, J. Adhes. Sci. Technol., vol. 3, no. 1, pp. 175–187, 1989. DOI: https://doi.org/10.1163/156856189X00146.
- Z. Peng, C. Wang, L. Chen, and S. Chen, Peeling behavior of a viscoelastic thin-film on a rigid substrate, Int. J. Solids Struct., vol. 51, no. 25–26, pp. 4596–4603, 2014. DOI: https://doi.org/10.1016/j.ijsolstr.2014.10.011.
- Z.L. Peng and S.H. Chen, Effects of surface roughness and film thickness on the adhesion of a bioinspired nanofilm, Phys. Rev. E, vol. 83, pp. 1–8, 2011. DOI: https://doi.org/10.1103/PhysRevE.83.051915.
- G. Huber, S.N. Gorb, N. Hosoda, R. Spolenak, and E. Arzt, Influence of surface roughness on gecko adhesion, Acta Biomater., vol. 3, no. 4, pp. 607–610, 2007. DOI: https://doi.org/10.1016/j.actbio.2007.01.007.
- O.R. Patil, A. Ameli, and N.V. Datla, Predicting environmental degradation of adhesive joints using a cohesive zone finite element model based on accelerated fracture tests, Int. J. Adhes. Adhes., vol. 76, pp. 54–60, 2017. DOI: https://doi.org/10.1016/j.ijadhadh.2017.02.007.
- N.V. Datla, M. Papini, J. Ulicny, B. Carlson, and J.K. Spelt, The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint, Eng. Fract. Mech., vol. 78, no. 6, pp. 1125–1139, 2011. DOI: https://doi.org/10.1016/j.engfracmech.2011.01.028.
- N.V. Datla, J. Ulicny, B. Carlson, M. Papini, and J.K. Spelt, Mixed-mode fatigue behavior of degraded toughened epoxy adhesive joints, Int. J. Adhes. Adhes., vol. 31, no. 2, pp. 88–96, 2011. DOI: https://doi.org/10.1016/j.ijadhadh.2010.11.007.
- J.P. Pickering, D.W. Van Der Meer, and G.J. Vancso, Effects of contact time, humidity, and surface roughness on the adhesion hysteresis of polydimethylsiloxane, J. Adhes. Sci. Technol., vol. 15, no. 12, pp. 1429–1441, 2001. DOI: https://doi.org/10.1163/156856101753213286.
- M. Paggi and J. Reinoso, A variational approach with embedded roughness for adhesive contact problems, Mech. Adv. Mater. Struct., vol. 0, pp. 1–17, 2018. DOI: https://doi.org/10.1080/15376494.2018.1525454.
- T.M. Cho, et al., Effect of surface roughness on the adhesive strength of the heat-resistant adhesive RTV88, J. Adhes. Sci. Technol., vol. 23, no. 15, pp. 1875–1882, 2009. DOI: https://doi.org/10.1163/016942409X12508517390671.
- H. Zarei, M.R. Marulli, M. Paggi, R. Pietrogrande, C. Üffing, and P. Weißgraeber, Adherend surface roughness effect on the mechanical response of adhesive joints, ArXiv Prepr 2020, 2006. https://arxiv.org/abs/2006.06233v1
- C. Creton and M. Ciccotti, Fracture and adhesion of soft materials: A review, Rep. Prog. Phys., vol. 79, no. 4, pp. 046601, 2016. DOI: https://doi.org/10.1088/0034-4885/79/4/046601.