References
- J. Llorca, C. González, J. M. Molina-Aldareguía, J. Segurado, R. Seltzer, F. Sket, M. Rodríguez, S. Sádaba, R. Muñoz, L. P. Canal, Multiscale modeling of composite materials: a roadmap towards virtual testing, Adv. Mater., vol. 23, no. 44, pp. 5130–5147, 2011. DOI: https://doi.org/10.1002/adma.201101683.
- L. Alonso, C. Navarro, and S. García-Castillo, Experimental study of woven-laminates structures subjected to high-velocity impact, Mech. Adv. Mater. Struct., vol. 26, no. 12, pp. 1001–1007, 2018b. DOI: https://doi.org/10.1080/15376494.2018.1526354.
- P. Maimí, P. P. Camanho, J. A. Mayugo, and C. G. Dávila, A continuum damage model for composite laminates: Part II–computational implementation and validation, Mech. Mater., vol. 39, no. 10, pp. 909–919, 2007. DOI: https://doi.org/10.1016/j.mechmat.2007.03.006.
- N. Naik, and A. Doshi, Ballistic impact behaviour of thick composites: analytical formulation, AIAA J., vol. 43, no. 7, pp. 1525–1536, 2005. DOI: https://doi.org/10.2514/1.11993.
- L. M. Bresciani, A. Manes, and M. Giglio, An analytical model for ballistic impacts against plain-woven fabrics with a polymeric matrix, Int. J. Impact Eng., vol. 78, pp. 138–149, 2015. DOI: https://doi.org/10.1016/j.ijimpeng.2015.01.001.
- M. Mamivand, and G. Liaghat, A model for ballistic impact on multi-layer fabric targets, Int. J. Impact Eng., vol. 37, no. 7, pp. 806–812, 2010. DOI: https://doi.org/10.1016/j.ijimpeng.2010.01.003.
- L. Alonso, C. Navarro, and S. García-Castillo, Analytical models for the perforation of thick and thin thicknesses woven-laminates subjected to high-velocity impact, Composites Part B., vol. 143, no. 15, pp. 292–300, 2018a. DOI: https://doi.org/10.1016/j.compositesb.2018.01.030.
- S. García-Castillo, S. Sánchez Sáez, C. Santiuste, E. Barbero, and C. Navarro, Perforation of Composite Laminate Subjected to Dynamic Loads, Springer, Netherlands, pp. 291–337, 2013.
- S. S. Morye, P. J. Hine, R. A. Duckett, D. J. Carr, and I. M. Ward, Modelling of the energy absorption by polymer composites upon ballistic impact, Compos. Sci. Technol., vol. 60, no. 14, pp. 2631–2642, 2000. DOI: https://doi.org/10.1016/S0266-3538(00)00139-1.
- N. Naik, and P. Shrirao, Composite structures under ballistic impact, Compos. Struct., vol. 66, no. 1–4, pp. 579–590, 2004. DOI: https://doi.org/10.1016/j.compstruct.2004.05.006.
- C. Navarro, Simplified modelling of the ballistic behaviour of fabric and fibre-reinforced polymer matrix composites, Kem., vol. 141–143, pp. 383–400, 1997. DOI: https://doi.org/10.4028/www.scientific.net/KEM.141-143.383.
- G. Zhu, W. Goldsmith, and C. Dharan, Penetration of laminated kevlar by projectiles II. Analytical model, Int. J. Solids Struct., vol. 29, no. 4, pp. 421–436, 1992. DOI: https://doi.org/10.1016/0020-7683(92)90208-B.
- N. Naik, P. Shrirao, and B. Reddy, Ballistic impact behaviour of woven fabric composites: Parametric studies, Mater. Sci. Eng. A., vol. 412, no. 1–2, pp. 104–116, 2005. DOI: https://doi.org/10.1016/j.msea.2005.08.019.
- N. Naik, P. Shrirao, and C. Reddy, Ballistic impact behaviour of woven fabric composites: Formulation, Int. J. Impact Eng., vol. 32, no. 9, pp. 1521–1552, 2006. DOI: https://doi.org/10.1016/j.ijimpeng.2005.01.004.
- H. Wen, Predicting the penetration and perforation of FRP laminates struck normally by projectiles with different nose shapes, Compos. Struct., vol. 49, no. 3, pp. 321–329, 2000. DOI: https://doi.org/10.1016/S0263-8223(00)00064-7.
- H. Wen, Penetration and perforation of thick FPR laminates, Compos. Sci. Technol., vol. 61, no. 8, pp. 1163–1172, 2001. DOI: https://doi.org/10.1016/S0266-3538(01)00020-3.
- B. Buitrago-Pérez, S. García-Castillo, and E. Barbero, Experimental analysis of perforation of glass/polyester structures subjected to high-velocity impact, Material Lett., vol. 64, no. 9, pp. 1052–1054, 2010. DOI: https://doi.org/10.1016/j.matlet.2010.02.007.
- E. Gellert, S. Cimpoeru, and R. L. Woodward, A study of the effect of target thickness on the ballistic perforation of glass-fibre-reinforced plastic composites, Int. J. Impact Eng., vol. 24, no. 5, pp. 445–456, 2000. DOI: https://doi.org/10.1016/S0734-743X(99)00175-X.
- J. López-Puente, R. Zaera, and C. Navarro, An analytical model for high velocity impact on thin CFRPS woven laminated plates, Int. J. Solids Struct., vol. 44, no. 9, pp. 2837–2851, 2007. DOI: https://doi.org/10.1016/j.ijsolstr.2006.08.022.
- D. Gregori, R. Scazzosi, S. Nunes, S. Amico, M. Giglio, and A. Manes, Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fiber composite ballistic shields: Improvement in modelling approaches, Composites Part B., vol. 187, no. 15, pp. 107830, 2020.
- D. Mohotti, T. Ngo, S. Raman, and P. Mendis, Analytical and numerical investigation of polyurea layered aluminium plates subjected to high velocity projectile impact, Mater. Design, vol. 82, no. 5, pp. 1–17, 2015. DOI: https://doi.org/10.1016/j.matdes.2015.05.036.
- L. Alonso, F. Martínez-Hergueta, D. Garcia-Gonzalez, C. Navarro, S. García-Castillo, and F. Teixeira-Dias, A finite element approach to model high-velocity impact on thin woven GFRP plates, Int. J. Impact Eng., vol. 142, pp. 103593, 2020. DOI: https://doi.org/10.1016/j.ijimpeng.2020.103593.
- S. García-Castillo, J. López-Puente, S. Sánchez Sáez, E. Barbero, and C. Navarro, 2006. Analytical model for energy absorption capabilities of glass/polyester panels subjected to ballistic impact, Conference in Developments in Theoretical and Applied Mechanics.
- J. Harding, and L. Welsh, A tensile testing technique for fiber-reinforced composites at impact rates of strain, J. Mater. Sci., vol. 18, no. 6, pp. 1810–1826, 1983. DOI: https://doi.org/10.1007/BF00542078.
- J. Harding, and C. Ruiz, The mechanical behaviour of composite materials under impact loading, Kem., vol. 141–143, pp. 403–426, 1997. DOI: https://doi.org/10.4028/www.scientific.net/KEM.141-143.403.
- J. Smith, F. L. McCrackin, and H. Schiefer, Stress-strain relationships in yarns subjected to rapid impact loading: 5. wave propagation in long textile yarns impacted transversally, J. Res. Natl. Bur. Stan., vol. 60, no. 5, pp. 517–534, 1958. DOI: https://doi.org/10.6028/jres.060.052.
- S. García-Castillo, S. Sánchez Sáez, J. López-Puente, E. Barbero, and C. Navarro, Impact behaviour of preloaded glass/polyester woven plates, Compos. Sci. Technol., vol. 69, no. 6, pp. 711–717, 2009. DOI: https://doi.org/10.1016/j.compscitech.2008.01.007.
- W. Cantwell, and J. Morton, Impact perforation of carbon fibre reinforced plastic, Comp. Sci. Technol., vol. 38, no. 2, pp. 119–141, 1990. DOI: https://doi.org/10.1016/0266-3538(90)90002-M.
- H. Kim, D. Welch, and K. Kedward, Experimental investigation of high velocity ice impacts on woven carbon/epoxi composite panels, Composites Part A., vol. 34, no. 1, pp. 25–41, 2003. DOI: https://doi.org/10.1016/S1359-835X(02)00258-0.
- J. Rhymer, H. Kim, and D. Roach, The damage resistance of quasi-isotropic carbon/epoxy composite tape laminates impacted by high velocity ice, Compos. Part A Appl. Sci. Manuf., vol. 43, no. 7, pp. 1134–1144, 2012. DOI: https://doi.org/10.1016/j.compositesa.2012.02.017.
- R. Gil-Alba, L. Alonso, C. Navarro, and S. García-Castillo, Morphological study of damage evolution in woven-laminates subjected to high-velocity impact, Mech. Adv. Mater. Struct., vol. 26, no. 24, pp. 2023–2029, 2019. DOI: https://doi.org/10.1080/15376494.2019.1692264.
- F. Chang, and K. Chang, A progressive damage model for laminated composites containing stress concentrations, J. Compos. Mater., vol. 21, no. 9, pp. 834–855, 1987. DOI: https://doi.org/10.1177/002199838702100904.
- Z. Hashin, Failure criteria for unidirectional fiber composites, J. Appl. Mec., vol. 47, no. 2, pp. 329–334, 1980. DOI: https://doi.org/10.1115/1.3153664.
- C. Menna, D. Asprone, G. Caprino, V. Lopresto, and A. Prota, Numerical simulation of impact tests on GFRP composite laminates, Int. J. Impact Eng., vol. 38, no. 8-9, pp. 677–685, 2011. DOI: https://doi.org/10.1016/j.ijimpeng.2011.03.003.
- R. Muñoz, F. Martínez-Hergueta, F. Gálvez, C. González, and J. Llorca, Ballistic performance of hybrid 3d woven composites: experiments and simulations, Compos. Struct., vol. 127, pp. 141–151, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.03.021.
- J. Xiao, B. Gama, and J. Gillespie, Jr., Progressive damage and delamination in plain weave s-2 glass/sc-15 composites under quasi-static punch-shear loading, Compos. Struct., vol. 78, no. 2, pp. 182–196, 2007. DOI: https://doi.org/10.1016/j.compstruct.2005.09.001.
- A. Turon, C. Dávila, P. Camaho, and J. Coste, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Eng. Fract. Mech., vol. 74, no. 10, pp. 1665–1682, 2007. DOI: https://doi.org/10.1016/j.engfracmech.2006.08.025.
- M. Kenane, and M. Benzeggagh, Mixed-mode delamination fracture thoughness of unidirectional glass/epoxi composites under fatigue loading, Compos. Sci. Technol., vol. 57, no. 5, pp. 597–605, 1997. DOI: https://doi.org/10.1016/S0266-3538(97)00021-3.
- Abaqus6.14, 2014. Systemes D. Abaqus 6.14 User’s Manual.
- J. Lambert, and G. Jonas, Towards standarization of in terminal ballistic testing: velocity representation, Ballistic Research Laboratories, 1976.
- C. Ulven, U. Vaidya, and M. Hosur, Effect of projectile shape during ballistic perforation of VARTM carbon/epoxy composite panels, Compos. Struct., vol. 61, no. 1–2, pp. 143–150, 2003. DOI: https://doi.org/10.1016/S0263-8223(03)00037-0.