References
- Z. Li, W. Ma, P. Xu, and S. Yao, Crushing behavior of circumferentially corrugated square tube with different cross inner ribs, Thin Wall Struct., vol. 144, pp. 106370, 2019.
- S. Yao, Z. Li, W. Ma, and P. Xu, Crashworthiness analysis of a straight-tapered shrink tube, Int. J. Mech. Sci., vol. 157–158, pp. 512–527, 2019. DOI: https://doi.org/10.1016/j.ijmecsci.2019.04.058.
- S. Xie, Z. Feng, H. Zhou, and D. Wang, Three-point bending behavior of Nomex honeycomb sandwich panels: Experiment and simulation, Mech. Adv. Mater. Struct., pp. 1–15, 2020.
- X. Zhang and H. Zhang, Axial crushing of circular multi-cell columns, Int. J. Impact Eng., vol. 65, pp. 110–125, 2014. DOI: https://doi.org/10.1016/j.ijimpeng.2013.12.002.
- W. Hong, H. L. Fan, Z. C. Xia, F. N. Jin, Q. Zhou, and D. N. Fang, Axial crushing behaviors of multi-cell tubes with triangular lattices, Int. J. Impact Eng., vol. 63, pp. 106–117, 2014. DOI: https://doi.org/10.1016/j.ijimpeng.2013.08.007.
- X. Zhang and H. Zhang, Energy absorption of multi-cell stub columns under axial compression, Thin Wall Struct., vol. 68, pp. 156–163, 2013. DOI: https://doi.org/10.1016/j.tws.2013.03.014.
- N. Qiu, Y. Gao, J. Fang, Z. Feng, G. Sun, and Q. Li, Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases, Finite Elem. Anal. Des., vol. 104, pp. 89–101, 2015. DOI: https://doi.org/10.1016/j.finel.2015.06.004.
- S. Reddy, M. Abbasi, and M. Fard, Multi-cornered thin-walled sheet metal members for enhanced crashworthiness and occupant protection, Thin Wall Struct., vol. 94, pp. 56–66, 2015. DOI: https://doi.org/10.1016/j.tws.2015.03.029.
- A. A. Nia and J. H. Hamedani, Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries, Thin Wall Struct., vol. 48, pp. 946–954, 2010.
- Z. L. Tang, S. T. Liu, and Z. H. Zhang, Energy absorption properties of non-convex multi-corner thin-walled columns, Thin Wall Struct., vol. 51, pp. 112–120, 2012. DOI: https://doi.org/10.1016/j.tws.2011.10.005.
- W. Ma, S. Xie, and Z. Li, Mechanical performance of bio-inspired corrugated tubes with varying vertex configurations, Int. J. Mech. Sci., vol. 172, pp. 105399, 2020. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105399.
- G. Y. Sun, T. Y. Liu, X. D. Huang, G. Zhen, and Q. Li, Topological configuration analysis and design for foam filled multi-cell tubes, Eng. Struct., vol. 155, pp. 235–250, 2018. DOI: https://doi.org/10.1016/j.engstruct.2017.10.063.
- N. S. Ha and G. Lu, A review of recent research on bio-inspired structures and materials for energy absorption applications, Composites Part B., vol. 181, pp. 107496, 2020.
- N. Zhao et al., Bioinspired materials: From low to high dimensional structure, Adv. Mater., vol. 26, no. 41, pp. 6994–7017, 2014. DOI: https://doi.org/10.1002/adma.201401718.
- J. Fu, Q. Liu, K. Liufu, Y. Deng, J. Fang, and Q. Li, Design of bionic-bamboo thin-walled structures for energy absorption, Thin Wall Struct., vol. 135, pp. 400–413, 2019. DOI: https://doi.org/10.1016/j.tws.2018.10.003.
- D. Hu, Y. Wang, B. Song, L. Dang, and Z. Zhang, Energy-absorption characteristics of a bionic honeycomb tubular nested structure inspired by bamboo under axial crushing, Composites Part B: Eng., vol. 162, pp. 21–32, 2019. DOI: https://doi.org/10.1016/j.compositesb.2018.10.095.
- H. Yin, Y. Xiao, G. Wen, Q. Qing, and X. Wu, Crushing analysis and multi-objective optimization design for bionic thin-walled structure, Mater Design., vol. 87, pp. 825–834, 2015. DOI: https://doi.org/10.1016/j.matdes.2015.08.095.
- C. Gong, Z. Bai, J. Lv, and L. Zhang, Crashworthiness analysis of bionic thin-walled tubes inspired by the evolution laws of plant stems, Thin Wall Struct., vol. 157, pp. 107081, 2020.
- J. Chen et al., Integrated honeycomb structure of a beetle forewing and its imitation, Mater. Sci. Eng. C., vol. 32, no. 3, pp. 613–618, 2012. DOI: https://doi.org/10.1016/j.msec.2011.12.020.
- L. W. Zhang, Z. H. Bai, and F. H. Bai, Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections, Thin Wall Struct., vol. 122, pp. 42–51, 2018. DOI: https://doi.org/10.1016/j.tws.2017.10.010.
- H. Huang and S. Xu, Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads, Thin Wall Struct., vol. 144, pp. 106333, 2019.
- X. Xu, Y. Zhang, J. Wang, F. Jiang, and C. H. Wang, Crashworthiness design of novel hierarchical hexagonal columns, Compos. Struct., vol. 194, pp. 36–48, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.03.099.
- Suchao Xie, Weilin Yang, Ning Wang, and Haihong Li, Crashworthiness analysis of multi-cell square tubes under axial loads, Int. J. Mech. Sci., vol. 121, pp. 106–118, 2017. DOI: https://doi.org/10.1016/j.ijmecsci.2016.12.005.
- W. Ma, Z. Li, and S. Xie, Crashworthiness analysis of thin-walled bio-inspired multi-cell corrugated tubes under quasi-static axial loading, Eng. Struct., vol. 204, pp. 110069, 2020. DOI: https://doi.org/10.1016/j.engstruct.2019.110069.
- S. Y. Wu, G. Y. Li, G. Y. Sun, X. Wu, and Q. Li, Crashworthiness analysis and optimization of sinusoidal corrugation tube, Thin Wall Struct., vol. 105, pp. 121–134, 2016. DOI: https://doi.org/10.1016/j.tws.2016.03.029.
- F. Tarlochan, F. Samer, A. M. S. Hamouda, S. Ramesh, and K. Khalid, Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces, Thin Wall Struct., vol. 71, pp. 7–17, 2013. DOI: https://doi.org/10.1016/j.tws.2013.04.003.
- J. Fang, Y. Gao, G. Sun, N. Qiu, and Q. Li, On design of multi-cell tubes under axial and oblique impact loads, Thin Wall Struct., vol. 95, pp. 115–126, 2015. DOI: https://doi.org/10.1016/j.tws.2015.07.002.
- W. Huang, et al., A natural energy absorbent polymer composite: The equine hoof wall, Acta Biomater., vol. 90, pp. 267–277, 2019.
- C. C. Pollitt, Anatomy and physiology of the inner hoof wall, Clin. Techn. Equine Pract., vol. 3, no. 1, pp. 3–21, 2004. DOI: https://doi.org/10.1053/j.ctep.2004.07.001.
- Z. Li, W. Ma, P. Xu, and S. Yao, Crashworthiness of multi-cell circumferentially corrugated square tubes with cosine and triangular configurations, Int. J. Mech. Sci., vol. 165, pp. 105205, 2020. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105205.
- S. Wang, Y. Peng, T. Wang, X. Chen, L. Hou, and H. Zhang, The origami inspired optimization design to improve the crashworthiness of a multi-cell thin-walled structure for high speed train, Int. J. Mech. Sci., vol. 159, pp. 345–358, 2019. DOI: https://doi.org/10.1016/j.ijmecsci.2019.06.017.
- X. Zhang and H. Zhang, Experimental and numerical investigation on crush resistance of polygonal columns and angle elements, Thin Wall Struct., vol. 57, pp. 25–36, 2012. DOI: https://doi.org/10.1016/j.tws.2012.04.006.
- X. Zhang and H. Zhang, Theoretical and numerical investigation on the crush resistance of rhombic and kagome honeycombs, Compos Struct., vol. 96, pp. 143–152, 2013. DOI: https://doi.org/10.1016/j.compstruct.2012.09.028.
- E. K. Zavadskas, A. Kaklauskas, F. Peldschus, and Z. Turskis, Multi-attribute assessment of road design solutions by using the COPRAS method, Baltic J. Road Bridge Eng., vol. 2, pp. 195–203, 2007.
- M. Yang et al., Axial crushing of ultralight all-metallic truncated conical sandwich shells with corrugated cores, Thin Wall Struct., vol. 140, pp. 318–330, 2019. DOI: https://doi.org/10.1016/j.tws.2019.03.048.
- V. Dhamotharan, P. D. Jadhav, P. Ramu, and A. K. Prakash, Optimal design of savonius wind turbines using ensemble of surrogates and CFD analysis, Struct. Multidisc. Optim., vol. 58, no. 6, pp. 2711–2726, 2018. DOI: https://doi.org/10.1007/s00158-018-2052-x.