Simultaneous analysis and optimum design of synthetic and vegetable fiber-reinforced composites for buckling - failure phenomena

References

• L. Aydin, H. S. Artem, E. Oterkus, O. Gundogdu, and H. Akbulut, “Chapter 2 – Mechanics of fiber composites,” in Fiber Technology for Fiber-Reinforced Composites; A Volume in Woodhead Publishing Series in Composites Science and Engineering, M. Özgür Seydibeyoğlu, A. K. Mohanty, and M. Misra, Eds. Elsevier, Duxford, United Kingdom, 2017.
   Google Scholar
• A. K. Mohanty, M. Misra, and L. T. Drzal, eds. Natural fibers, biopolymers, and biocomposites. Boca Raton, FL: Taylor & Francis Group, 2005, p. 896.
   Google Scholar
• A. K. Mohanty, M. Misra, and G. Hinrichsen, Biofibers, biodegradable polymers and biocomposites: an overview, Macromol. Mater. Eng., vol. 276, no. 1, pp. 1–24, 2000. DOI: 10.1002/(SICI). 1439-2054(20000301)276:1≤1::AID-MAME1≥3.0.CO;2-W.
   Web of Science ®Google Scholar
• O. Faruk, A. K. Bledzki, H. P. Fink, and M. Sain, Biocomposites reinforced with natural fibers: 2000–2010, Prog. Polym. Sci., vol. 37, no. 11, pp. 1552–1596, 2012. DOI: 10.1016/j.progpolymsci.2012.04.003.
   Web of Science ®Google Scholar
• L. Anania, and G. D'agata, Numerical validation of double punch test for the assessment of tensile strength in natural fiber reinforced concrete, Mech. Adv. Mater. Struct., vol. 26, no. 3, pp. 238–247, 2019. DOI: 10.1080/15376494.2017.1387328.
   Web of Science ®Google Scholar
• C. Baillie, ed. Green Composites: Polymer Composites and the Environment. Cambridge, UK: Woodhead Publishing Limited, 2004, p. 308.
   Google Scholar
• A. K. Bledzki, V. E. Sperber, and O. Faruk, Natural and wood fibre reinforcements in polymers, iSmithers Rapra Pub., vol. 13, no. 8, pp. 1–144, 2002.
   Google Scholar
• R. R. Franck, ed. Bast and Other Plant Fibres. Boca Raton, FL: CRC Press, 2005, p. 397.
   Google Scholar
• A. Hassan, A. A. Salema, F. H. Ani, and A. A. Bakar, A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials, Polym. Compos., vol. 31, no. 12, pp. 2079–2101, 2010. DOI: 10.1002/pc.21006.
   Web of Science ®Google Scholar
• M. J. John, and S. Thomas, Review – biofibres and biocomposites, Carbo-Hydrate Polym., vol. 71, no. 3, pp. 343–364, 2008. DOI: 10.1016/j.carbpol.2007.05.040.
   Web of Science ®Google Scholar
• K. Pickering, Ed. Properties and Performance of Natural-Fibre Composites. Cambridge, UK: Woodhead Publishing. Elsevier, 2008, p. 557.
   Google Scholar
• S. Samal, M. Stuchlík, and I. Petrikova, Thermal behavior of flax and jute reinforced in matrix acrylic composite, J. Therm. Anal. Calorim., vol. 131, no. 2, pp. 1035–1040, 2018. DOI: 10.1007/s10973-017-6662-0.
   Web of Science ®Google Scholar
• S. Shinoj, R. Visvanathan, S. Panigrahi, and M. Kochubabu, Oil palm fiber (OPF) and its composites: a review, Ind. Crops Prod., vol. 33, no. 1, pp. 7–22, 2011. DOI: 10.1016/j.indcrop.2010.09.009.
   Web of Science ®Google Scholar
• J. Summerscales, N. P. J. Dissanayake, A. S. Virk, and W. Hall, A review of bast fibres and their composites. Part 1 – Fibres as reinforcements, Compos. Part A: Appl. Sci. Manuf., vol. 41, no. 10, pp. 1329–1335, 2010. DOI: 10.1016/j.compositesa.2010.06.001.
   Web of Science ®Google Scholar
• S. Thomas, and L. A. Pothan, Editors.Natural Fibre Reinforced Polymer Composites: From Macro to Nanoscale, Philadelphia, PA: Old City Publishing, 2009, p. 539.
   Google Scholar
• N. Venkateshwaran, and A. Elayaperumal, Banana fiber reinforced polymer composites –a review, J. Reinf. Plast. Compos., vol. 29, no. 15, pp. 2387–2396, 2010. DOI: 10.1177/0731684409360578.
   Web of Science ®Google Scholar
• M. Savran, and L. Aydin, Stochastic optimization of graphite-flax/epoxy hybrid laminated composite for maximum fundamental frequency and minimum cost, Eng. Struct., vol. 174, pp. 675–687, 2018. DOI: 10.1016/j.engstruct.2018.07.043.
   Web of Science ®Google Scholar
• C. Baley, Analysis of the flaxfibres tensile behaviour and analysis of the tensile stiffness increase, Compos. Part A: Appl. Sci. Manuf., vol. 33, no. 7, pp. 939–948, 2002. DOI: 10.1016/S1359-835X(02)00040-4.
   Web of Science ®Google Scholar
• A. Bourmaud, and C. Baley, Rigidity analysis of polypropylene/vegetalfibre composites after recycling, Polym. Degrad. Stab., vol. 94, no. 3, pp. 297–305, 2009. DOI: 10.1016/j.polymdegradstab.2008.12.010.
   Web of Science ®Google Scholar
• D. Nabi-Saheb, and J. P. Jog, Natural fiber polymer composites: a review, Adv. Polym. Technol., vol. 18, no. 4, pp. 351–363, 1999. DOI: 10.1002/(SICI)1098-2329(199924)18:4.
   Web of Science ®Google Scholar
• T. Corbière-Nicollier, B. Gfeller Laban, L. Lundquist, Y. Leterrier, J.-A. E. Månson, and O. Jolliet, Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics, Resour. Conserv. Recycl., vol. 33, no. 4, pp. 267–287, 2001. DOI: 10.1016/S0921-3449(01)00089-1..
   Web of Science ®Google Scholar
• S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, Are natural fiber composites environmentally superior to glass fiber reinforced composites?, Compos. A Appl. Sci. Manuf., vol. 35, no. 3, pp. 371–376, 2004. DOI: 10.1016/j.compositesa.2003.09.016.
   Web of Science ®Google Scholar
• R. Ganguli, Optimal design of composite structures: a historical review, J. Indian Inst. Sci., vol. 93, no. 4, pp. 557–570, 2013.
   Web of Science ®Google Scholar
• M. Savran, O. Ayakdas, L. Aydin, and M. E. Dizlek, Chapter 4: Design and optimization of glass reinforced composite driveshafts for automotive industry, in Stochastic Optimization Methods, Levent Aydin, Selda Oterkus, and H. Seçil Artem, Eds. CRC PressTaylor & Francis Group, NW, Boca Raton, 2020.
   Google Scholar
• K. Lakshmi, and A. R. M. Rao, Optimal design of laminate composite plates using dynamic hybrid adaptive harmony search algorithm, J. Reinf. Plast. Compos., vol. 34, no. 6, pp. 493–518, 2015. DOI: 10.1177/0731684415574228.
   Web of Science ®Google Scholar
• R. Spallino, and G. Thierauf, Thermal buckling optimization of composite laminates by evolution strategies, Comput. Struct., vol. 78, no. 5, pp. 691–697, 2000. https://doi.org/10.1016/S0045-7949.(00)00050-X. DOI: 10.1016/S0045-7949(00)00050-X.
   Web of Science ®Google Scholar
• A. Deveci, L. Aydin, and H. S. Artem, Buckling optimization of composit laminates using a hybrid Algorithm under Puck failure criterion constraint, J. Reinf. Plast. Compos., vol. 35, no. 16, pp. 1233–1247, 2016 DOI: 10.1177/0731684416646860.
   Web of Science ®Google Scholar
• F. Aymerich, and M. Serra, Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO) metaheuristic, Compos.: Part A, vol. 39, no. 2, pp. 262–272, 2008. DOI: 10.1016/j.compositesa.2007.10.011.
   Web of Science ®Google Scholar
• O. Erdal, and F. O. Sonmez, Optimum design of composite laminates for maximum buckling load capacity using simulated annealing, Compos. Struct., vol. 71, no. 1, pp. 45–52, 2005. DOI: 10.1016/j.compstruct.2004.09.008.
   Web of Science ®Google Scholar
• S. Karakaya, and O. Soykasap, Buckling optimization of laminated composite plates using genetic algorithm and generalized pattern search algorithm, Struct. Multidisc. Optim., vol. 39, no. 5, pp. 477–486, 2009. DOI: 10.1007/s00158-008-0344-2.
   Web of Science ®Google Scholar
• C. W. Kim, and J. S. Lee, Optimal design of laminated composite plates for maximum buckling load using genetic algorithm, Proc. Inst. Mech. Eng. C: J. Mech. Eng. Sci., vol. 219, no. 9, pp. 869–878, 2005. DOI: 10.1243/095440605X31751.
   Web of Science ®Google Scholar
• B. Liu, R. T. Haftka, M. A. Akgün, and A. Todoroki, Permutation genetic algorithm for stacking sequence design of composite laminates, Comput. Methods Appl. Mech. Eng., vol. 186, no. 2–4, pp. 357–372, 2000. DOI: 10.1016/S0045-7825(99)90391-2.
   Web of Science ®Google Scholar
• A. R. M. Rao, and N. Arvind. A scatter search algorithm for stacking sequence optimisation of laminate composites, Compos. Struct., vol. 70, no. 4, pp. 383–402, 2005. DOI: 10.1016/j.compstruct.2004.09.031.
   Web of Science ®Google Scholar
• G. Soremekun, Z. Gürdal, R. T. Haftka, and L. T. Watson, Composite laminate design optimization by genetic algorithm with generalized elitist selection, Comput. Struct., vol. 79, no. 2, pp. 131–143, 2001. DOI: 10.1016/S0045-7949(00)00125-5.
   Web of Science ®Google Scholar
• O. Soykasap, and S. Karakaya, Structural optimization of laminated composite plates for maximum buckling load capacity using genetic algorithm, Key Eng. Mater., vol. 348–349, pp. 725–728, 2007. DOI: 10.4028/www.scientific.net/KEM.348-349.725.
   Google Scholar
• A. R. Vosoughi, A. Darabi, and H. Dehghani Forkhorji, Optimum stacking sequences of thick laminated composite plates for maximizing buckling load using FE-GAs-PSO, Compos. Struct., vol. 159, pp. 361–367, 2017. DOI: 10.1016/j.compstruct.2016.09.085.
   Web of Science ®Google Scholar
• A. G. De Miguel, I. Kaleel, M. H. Nagaraj, A. Pagani, M. Petrolo, and E. Carrera, Accurate evaluation of failure indices of composite layered structures via various FE models, Compos. Sci. Technol., vol. 167, pp. 174–189, 2018. DOI: 10.1016/j.compscitech.2018.07.031.
   Web of Science ®Google Scholar
• R. H. Lopez, M. A. Luersen, and E. S. Cursi, Optimization of laminated composites considering different failure criteria, Compos. Part B: Eng., vol. 40, no. 8, pp. 731–740, 2009. DOI: 10.1016/j.compositesb.2009.05.007.
   Web of Science ®Google Scholar
• G. N. Naik, S. Gyan, R. Satheesh, and Minimum Ganguli, weight design of fiber-reinforced laminated composite structures with maximum stress and Tsai-Wu failure criteria, J. Reinf. Plast. Compos., vol. 30, no. 2, pp. 179–192, 2011. DOI: 10.1177/0731684410391515.
   Web of Science ®Google Scholar
• A. Ayvalik, Failure performance optimization of laminated biocomposites by using stochastic methods. Master's thesis. Izmir: Izmir Katip Çelebi University, 2017.
   Google Scholar
• V. Fiore, L. Calabrese, T. Scalici, P. Bruzzaniti, and A. Valenza, Bearing strength and failure behavior of pinned hybrid glass-flax composite laminates, Polym. Test., vol. 69, pp. 310–319, 2018. DOI: 10.1016/j.polymertesting.2018.04.041.
   Web of Science ®Google Scholar
• A. A. Groenwold, and R. T. Haftka, Optimization with non-homogeneous failure criteria like Tsai–Wu for composite laminates, Struct. Multidisc. Optim., vol. 32, no. 3, pp. 183–190, 2006. DOI: 10.1007/s00158-006-0020-3.
   Web of Science ®Google Scholar
• A. P. Irawan, Failure mode analysis of ramie fiber reinforced composite material, in 2nd Nommensen International Conference on Technology and Engineering. IOP Conference Series: Materials Science and Engineering. IOP Publishing, vol. 420, 2018. DOI: 10.1088/1757-899X/420/1/012060.
   Google Scholar
• R. Koh, and B. Madsen, Strength failure criteria analysis for a flax fibre reinforced composite, Mech. Mater., vol. 124, pp. 26–32, 2018. DOI: 10.1016/j.mechmat.2018.05.005.
   Web of Science ®Google Scholar
• G. N. Naik, S. Gopalakrishnan, and R. Ganguli, Design optimization of composites using genetic algorithms and failure mechanism based failure criterion, Compos. Struct., vol. 83, no. 4, pp. 354–367, 2008. DOI: 10.1016/j.compstruct.2007.05.005.
   Web of Science ®Google Scholar
• T. A. Sebaey, C. S. Lopes, N. Blanco, and J. Costa, Ant colony optimization for dispersed laminated composite panels under biaxial loading, Compos. Struct., vol. 94, no. 1, pp. 31–36, 2011. DOI: 10.1016/j.compstruct.2011.07.021.
   Web of Science ®Google Scholar
• L. Aydin, Design of dimensionally-stable laminated somposites subjected to hygro-thermo-mechanical loading by stochastic optimization methods. PhD thesis. İzmir Institute of Technology, Izmir, 2011. http://library.iyte.edu.tr/tezler/doktora/makinamuh/T000984.pdf.
   Google Scholar
• S. S. Rao, Engineering Optimization: Theory and Practice. 4th ed. Hoboken, NJ: John Wiley & Sons Inc., 2009.
   Google Scholar
• M. Akçair, M. Savran, L. Aydin, O. Ayakdaş, S. Öztürk, and N. Küçükdoğan, Optimum design of anti-buckling behavior of graphite/epoxy laminated composites by differential evolution and simulated annealing method, Res. Eng. Struct. Mater., vol. 5, no. 2, pp. 175–188, 2019. DOI: http://dx.doi.org/10.17515/resm2019.66is0909.
   Google Scholar
• B. K. Ugural, Production and characterizastion of aligned flax fibre reinforced thermoplastic composite material. PhD thesis. Izmir: Ege University, 2017.
   Google Scholar