Effects of cellulose nanofiber content on impact properties of carbon fiber reinforced epoxy composites with the cellulose nanofiber dispersion layer

References

• E. Maccaferri et al., Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates, Mater. Des., vol. 195, pp. 109049, 2020. DOI: 10.1016/j.matdes.2020.109049.
   Web of Science ®Google Scholar
• J.H. Eun, D.H. Kim, and J.S. Lee, Effect of low melting temperature polyamide fiber-interlaced carbon fiber braid fabric on the mechanical performance and fracture toughness of CFRP laminates, Composites Part A, vol. 137, pp. 105987, 2020. DOI: 10.1016/j.compositesa.2020.105987.
   Web of Science ®Google Scholar
• H. Kishi, M. Kuwata, S. Matsuda, T. Asami, and A. Murakami, Damping properties of thermoplastic-elastomer interleaved carbon fiber-reinforced epoxy composites, Compos. Sci. Technol., vol. 64, no. 16, pp. 2517–2523, 2004. DOI: 10.1016/j.compscitech.2004.05.006.
   Web of Science ®Google Scholar
• E. Stelldinger, A. Kühhorn, and M. Kober, Experimental evaluation of the low-velocity impact damage resistance of CFRP tubes with integrated rubber layer, Compos. Struct., vol. 139, pp. 30–35, 2016. DOI: 10.1016/j.compstruct.2015.11.069.
   Web of Science ®Google Scholar
• S. Cai, Y. Li, Y. Liu, and W. Mai, Effect of electrospun polysulfone/cellulose nanocrystals interleaves on the interlaminar fracture toughness of carbon fiber/epoxy composites, Compos. Sci. Technol., vol. 181, pp. 107673, 2019. DOI: 10.1016/j.compscitech.2019.05.030.
   Web of Science ®Google Scholar
• H. Kurita, Y. Xie, K. Katabira, R. Honda, and F. Narita, The insert effect of cellulose nanofiber layer on glass fiber‐reinforced plastic laminates and their flexural properties, Mater. Des. Process. Commun., vol. 1, no. 3, pp. e58, 2019. DOI: 10.1002/mdp2.58.
   Google Scholar
• V. Carvelli, A. Betti, and T. Fujii, Fatigue and Izod impact performance of carbon plain weave textile reinforced epoxy modified with cellulose microfibrils and rubber nanoparticles, Composites Part A, vol. 84, pp. 26–35, 2016. DOI: 10.1016/j.compositesa.2016.01.005.
   Web of Science ®Google Scholar
• K. Oksman et al., Review of the recent developments in cellulose nanocomposite processing, Composites Part A: Appl. Sci. Manuf., vol. 83, pp. 2–18, 2016. DOI: 10.1016/j.compositesa.2015.10.041.
   Web of Science ®Google Scholar
• K. Ramamoorthy et. al., Performance of biocomposites from surface modified regenerated cellulose fibers and lactic acid thermoset bioresin, Cellulose, vol. 22, no. 4, pp. 2507–2528, 2015. DOI: 10.1007/s10570-015-0643-x.
   Web of Science ®Google Scholar
• Y. Shao, T. Yashiro, K. Okubo, and T. Fujii, Effect of cellulose nanofiber on fatigue performance of carbon fiber fabric composites, Composites Part A, vol. 76, pp. 244–254, 2015. DOI: 10.1016/j.compositesa.2015.05.033.
   Web of Science ®Google Scholar
• J.M. Raquez, Y. Habibi, M. Murariu, and P. Dubois, Polylactide (PLA)-based nanocomposites, Prog. Polym. Sci., vol. 38, no. 10–11, pp. 1504–1542, 2013. DOI: 10.1016/j.progpolymsci.2013.05.014.
   Web of Science ®Google Scholar
• M.H. Gabr, M.A. Elrahman, K. Okubo, and T. Fujii, Effect of microfibrillated cellulose on mechanical properties of plain-woven CFRP reinforced epoxy, Compos. Struct., vol. 92, no. 9, pp. 1999–2006, 2010. DOI: 10.1016/j.compstruct.2009.12.009.
   Web of Science ®Google Scholar
• A. Isogai, Emerging nanocellulose technologies: recent developments, Adv. Mater., vol. 33, no. 28, pp. e2000630, 2021. DOI: 10.1002/adma.202000630.
   PubMed Web of Science ®Google Scholar
• P. Dhar and V. Katiyar, 3. Benchmarking nanocellulose production: scale-up strategies and life-cycle assessment. In: Cellulose Nanocrystals, De Gruyter, 2020, pp. 49–80.
   Google Scholar
• K. Katagiri et al., Enhancement of the bending strength of I-shaped cross-sectional beam of CFRP by dispersing cellulose nanofibers without hydrophobic treatment on the surface, Mech. Adv. Mater. Struct., vol. 28, no. 11, pp. 1089–1097, 2021. DOI: 10.1080/15376494.2019.1633710.
   Web of Science ®Google Scholar
• K. Katagiri et al., The bending properties of CFRP I-shaped cross-sectional beam with dispersing cellulose nanofibers on the surface, Proceedings of the American Society for Composites—34th Technical Conference, pp. 31302, 2019.
   Google Scholar
• K. Katagiri et al., Enhancement of mechanical properties of CFRP manufactured by using electro-activated deposition resin molding method with the application of CNF without hydrophobic treatment, Compos. Sci. Technol., vol. 169, pp. 203–208, 2019. DOI: 10.1016/j.compscitech.2018.10.030.
   Web of Science ®Google Scholar
• K. Katagiri et al., Enhancement of the mechanical properties of the CFRP by cellulose nanofiber sheets using the electro-activated deposition resin molding method, Composites Part A: Appl. Sci. Manuf., vol. 123, pp. 320–326, 2019. DOI: 10.1016/j.compositesa.2019.05.022.
   Web of Science ®Google Scholar
• K. Katagiri et al., Enhancement method of CFRP with the non-hydrophobized cellulose nanofibers using aqueous electrodeposition solution, Mech. Adv. Mater. Struct., pp. 1–8, 2021.
   Web of Science ®Google Scholar
• K. Katagiri et al., Enhancement of impact properties of CFRP by inserting the non-hydrophobized cellulose nanofiber dispersion layer using an aqueous solution of epoxy resin, Mech. Adv. Mater. Struct., pp. 1954270, 2021. DOI: 10.1080/15376494.2021.1954270.
   Web of Science ®Google Scholar
• A. Dorigato and A. Pegoretti, Flexural and impact behaviour of carbon/basalt fibers hybrid laminates, J. Compos. Mater., vol. 48, no. 9, pp. 1121–1130, 2014. DOI: 10.1177/0021998313482158.
   Web of Science ®Google Scholar
• M. Kuhtz et al., An experimental study on the bending response of multi-layered fibre–metal–laminates, J. Compos. Mater., vol. 53, no. 18, pp. 2579–2591, 2019. DOI: 10.1177/0021998319835595.
   Web of Science ®Google Scholar
• I. Murakami, Electrolyzed activate insulation electro coating system “INSULEED”, Techno-cosmos., vol. 16, pp. 72–73, 2003.
   Google Scholar
• H. Sakamoto, Environment friendly electrolyzed activate deposition material with a high electric insulation, J. Oleo Sci., vol. 5, no. 10, pp. 489–496, 2005. (in Japanese). DOI: 10.5650/oleoscience.5.489.
   Google Scholar
• R. Murakami, History and principles for electrodeposition coating, J. Surf. Finish. Soc. Jpn., vol. 53, no. 5, pp. 288–292, 2002. (in Japanese). DOI: 10.4139/sfj.53.288.
   Google Scholar
• K. Katagiri et al., Manufacturing method of the heat-storable carbon fiber reinforced plastics with applying trans-1,4-polybutadiene by using cellulose nanofibers and electrodeposition solution, J. Storage. Mater., vol. 31, pp. 101636, 2020. DOI: 10.1016/j.est.2020.101636.
   Google Scholar
• K. Katagiri et al., Fabrication of heat-storable CFRP by incorporating trans-1,4-polybutadiene with the application of the electrodeposition resin molding method, J. Storage. Mater., vol. 26, pp. 100980, 2019. DOI: 10.1016/j.est.2019.100980.
   Google Scholar
• ASTM D790-17 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, 2017.
   Google Scholar
• S. Timoshenko et al., Theory of Elasticity, 3rd ed., McGraw-Hill Book Company, London, 1970.
   Google Scholar
• ISO 179-2 Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact test, 2020.
   Google Scholar
• A. Fernandez-Canteli et al., Dynamic fracture toughness measurements in composites by instrumented Charpy testing: influence of aging, Compos. Sci. Technol., vol. 62, no. 10–11, pp. 1315–1325, 2002. DOI: 10.1016/S0266-3538(02)00074-X.
   Web of Science ®Google Scholar
• A. Pegoretti et al., Experimental optimization of the impact energy absorption of epoxy–carbon laminates through controlled delamination, Compos. Sci. Technol., vol. 68, no. 13, pp. 2653–2662, 2008. DOI: 10.1016/j.compscitech.2008.04.036.
   Web of Science ®Google Scholar
• A.B. Reising, R.J. Moon, and J.P. Youngblood, Effect of particle alignment on mechanical properties of neat cellulose nanocrystal films, J. Sci. Technol. Forest Prod. Process., vol. 2, no. 6, pp. 32–41, 2012.
   Web of Science ®Google Scholar
• J.M. Lee et al., Prediction of bending stiffness for laminated CFRP and its application to manufacturing of roof reinforcement, Adv. Mech. Eng., vol. 6, pp. 404176, 2014. DOI: 10.1155/2014/404176.
   Google Scholar
• K. Yang et al., Integrating tough Antheraea pernyi silk and strong carbon fibres for impact-critical structural composites, Nat. Commun., vol. 10, no. 1, pp. 3786, 2019. DOI: 10.1038/s41467-019-11520-2.
   PubMedGoogle Scholar
• M. Selezneva et al., The brittle-to-ductile transition in tensile and impact behavior of hybrid carbon fibre/self-reinforced polypropylene composites, Composites Part A, vol. 109, pp. 20–30, 2018. DOI: 10.1016/j.compositesa.2018.02.034.
   Web of Science ®Google Scholar