Flexural behavior of hybrid GFRP-reinforced concrete-steel double-skin tubular beams

References

• N. G. Shrive, The use of fibre reinforced polymers to improve seismic resistance of masonry, Constr. Build. Mater., vol. 20, no. 4, pp. 269–277, 2006. DOI: 10.1016/j.conbuildmat.2005.08.030.
   Web of Science ®Google Scholar
• H. A. Rasheed, M. Nassajy, S. Al Subaie, S. M. Abrishamchian, and A. Al Tamimi, Suppressing delamination failure mode in concrete beams strengthened with short CFRP laminates, Mech. Adv. Mater. Struct., vol. 18, no. 3, pp. 194–200, 2011. DOI: 10.1080/15376494.2010.499022.
   Web of Science ®Google Scholar
• A. Fam, and S. H. Rizkalla, Behavior of axially loaded concrete-filled circular fiber-reinforced polymer tubes, ACI Struct. J., vol. 98, no. 3, pp. 280–289, 2001.
   Web of Science ®Google Scholar
• T. Ozbakkaloglu, and B. A. L. Fanggi, FRP-HSC-steel composite columns: Behavior under monotonic and cyclic axial compression, Mater. Struct., vol. 48, no. 4, pp. 1075–1093, 2015. DOI: 10.1617/s11527-013-0216-0.
   Web of Science ®Google Scholar
• M. F. Fahmy, and Z. Wu, Evaluating and proposing models of circular concrete columns confined with different FRP composites, Compos. Part B-Eng., vol. 41, no. 3, pp. 199–213, 2010. DOI: 10.1016/j.compositesb.2009.12.001.
   Web of Science ®Google Scholar
• J. G. Teng, J. F. Chen, S. T. Smith, and L. Lam, Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review, Struct. Build., vol. 156, no. 1, pp. 51–62, 2003. DOI: 10.1680/stbu.156.1.51.37880.
   Web of Science ®Google Scholar
• L. Lorenzis De, and R. Tepfers, Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites, J. Compos. Constr., vol. 7, no. 3, pp. 219–237, 2003. DOI: 10.1061/(ASCE)1090-0268(2003)7:3(219).
   Web of Science ®Google Scholar
• G. P. Lignola, A. Prota, G. Manfredi, and E. Cosenza, Experimental performance of RC hollow columns confined with CFRP, J. Compos. Constr., vol. 11, no. 1, pp. 42–49, 2007. DOI: 10.1061/(ASCE)1090-0268(2007)11:1(42).
   Web of Science ®Google Scholar
• B. P. Reddy, P. Alagusundaramoorthy, and R. Sundaravadivelu, Retrofitting of RC piles using GFRP composites, KSCE J. Civ. Eng., vol. 13, no. 1, pp. 39–47, 2009. DOI: 10.1007/s12205-009-0039-2.
   Web of Science ®Google Scholar
• A. Pavese, D. Bolognini, and S. Peloso, FRP seismic retrofit of RC square hollow section bridge piers, J. Earthquake Eng., vol. 8, no. sup001, pp. 225–250, 2004. DOI: 10.1080/13632460409350526.
   Web of Science ®Google Scholar
• Y. Xiao, Applications of FRP composites in concrete columns, Adv. Struct. Eng., vol. 7, no. 4, pp. 335–343, 2004. DOI: 10.1260/1369433041653552.
   Web of Science ®Google Scholar
• T. Vahid, S. Hamid, and A. Ali, Plastic hinge integration methods for cyclic analysis of polymer concrete-filled fiber reinforced polymer tube beams, Mech. Adv. Mater. Struct., vol. 27, no. 9, pp. 734–743, 2020.
   Web of Science ®Google Scholar
• G. Wu, Z. T. Lu, and Z. Wu, Strength and ductility of concrete cylinders confined with FRP composites, Constr. Build. Mater., vol. 20, no. 3, pp. 134–148, 2006. DOI: 10.1016/j.conbuildmat.2005.01.022.
   Web of Science ®Google Scholar
• R. Realfonzo, and A. Napoli, Concrete confined by FRP systems: Confinement efficiency and design strength models, Compos. Part B-Eng., vol. 42, no. 4, pp. 736–755, 2011. DOI: 10.1016/j.compositesb.2011.01.028.
   Web of Science ®Google Scholar
• B. L. Chen, and L. G. Wang, Experimental study on hollow steel-reinforced concrete-filled GFRP tubular members under axial compression, Steel Compos. Struct., vol. 32, no. 1, pp. 59–66, 2019.
   Web of Science ®Google Scholar
• M. Elchalakani, and G. Ma, Tests of glass fibre reinforced polymer rectangular concrete columns subjected to concentric and eccentric axial loading, Eng. Struct., vol. 151, pp. 93–104, 2017. DOI: 10.1016/j.engstruct.2017.08.023.
   Web of Science ®Google Scholar
• J. G. Teng, T. Yu, Y. L. Wong, and S. L. Dong, Hybrid FRP–concrete–steel tubular columns: Concept and behavior, Constr. Build Mater., vol. 21, no. 4, pp. 846–854, 2007. DOI: 10.1016/j.conbuildmat.2006.06.017.
   Web of Science ®Google Scholar
• X. Q. Jin, and W. F. Zhong, Progression in the research of FRP-concrete steel double-skin tubular members, Ind. Constr., vol. 45, no. 008, pp. 139–144, 2015.
   Google Scholar
• L. Zeng, L. Li, and G. Chen, Experimental study on mechanical behavior of GFRP-recycled concrete-steel tubular columns under axial compression, Chin. Civ. Eng. J., vol. 47, S2, pp. 21–27, 2014.
   Google Scholar
• B. Zhang, J. G. Teng, and T. Yu, Experimental behavior of hybrid FRP-concrete-steel double-skin tubular columns under combined axial compression and cyclic lateral loading, Eng. Struct., vol. 99, pp. 214–231, 2015. DOI: 10.1016/j.engstruct.2015.05.002.
   Web of Science ®Google Scholar
• B. A. L. Fanggi, and T. Ozbakkaloglu, Behavior of hollow and concrete-filled FRP-HSC and FRP-HSC-steel composite columns subjected to concentric compression, Adv. Struct. Eng., vol. 18, no. 5, pp. 715–738, 2015. DOI: 10.1260/1369-4332.18.5.715.
   Web of Science ®Google Scholar
• Z. Xiong, J. Deng, F. Liu, et al., Experimental investigation on the behavior of GFRP-RAC-steel double-skin tubular columns under axial compression, Thin-Walled Struct., vol. 132, pp. 350–361, 2018. DOI: 10.1016/j.tws.2018.08.026.
   Web of Science ®Google Scholar
• L. J. Li, S. Fang, B. Fu, H. D. Chen, and M. S. Geng, Behavior of hybrid FRP-concrete-steel multitube hollow columns under axial compression, Constr. Build Mater., vol. 253, pp. 119159, 2020. DOI: 10.1016/j.conbuildmat.2020.119159.
   Web of Science ®Google Scholar
• A. Fam, M. A. Pando, G. Filz, and S. H. Rizkalla, Pre-cast composite piles for the Route 40 bridge in Virginia using concrete-filled FRP tubes, PCIJ, vol. 48, no. 3, pp. 32–45, 2003. DOI: 10.15554/pcij.05012003.32.45.
   Web of Science ®Google Scholar
• A. Fam, R. Greene, and S. Rizkalla, Field applications of concrete-filled FRP Tubes for Marine Piles, ACI Special Publication (Filled Application of FRP Reinforcement: Case Studies) 29, vol. 215, no. 9, pp. 161–180, 2003.
   Google Scholar
• B. Feng, F. Xie, and P. F. Li, Feasibility study on application of GFRP-reinforced concrete structure in transmission line, J. Shaoxing Univ., vol. 10, pp. 79–83, 2015.
   Google Scholar
• T. Yu, Y. L. Wong, J. G. Teng, S. L. Dong, E. S, and S. Lam, Flexural behaviour of hybrid FRP-concrete-steel double skin tubular members, J. Compos. Constr., vol. 10, no. 5, pp. 443–452, 2006. DOI: 10.1061/(ASCE)1090-0268(2006)10:5(443).
   Web of Science ®Google Scholar
• Z. Huang, Y. Zhou, G. Hu, W. Deng, H. Gao, and L. Sui, Flexural resistance and deformation behaviour of CFRP-ULCC-steel sandwich composite structures, Compos. Struct., vol. 257, pp. 113080, 2021. DOI: 10.1016/j.compstruct.2020.113080.
   Web of Science ®Google Scholar
• S. Zakaib, and A. Fam, Flexural performance and moment connection of concrete-filled GFRP tube-encased steel I-sections, J. Compos. Constr., vol. 16, no. 5, pp. 604–613, 2012. DOI: 10.1061/(ASCE)CC.1943-5614.0000288.
   Web of Science ®Google Scholar
• B. Chen, and L. Wang, Experimental study on flexural behavior of splicing concrete-filled GFRP tubular composite members connected with steel bars, Steel Compos. Struct., vol. 18, no. 5, pp. 1129–1144, 2015. DOI: 10.12989/scs.2015.18.5.1129.
   Web of Science ®Google Scholar
• M. Muttashar, A. Manalo, W. Karunasena, and W. Lokuge, Flexural behaviour of multi-celled GFRP composite beams with concrete infill: Experiment and theoretical analysis, Compos. Struct., vol. 159, pp. 21–33, 2017. DOI: 10.1016/j.compstruct.2016.09.049.
   Web of Science ®Google Scholar
• J. L. Zhao, J. G. Teng, T. Yu, and L. J. Li, Behavior of large-scale hybrid FRP-concrete-steel double-skin tubular beams with shear connectors, J. Compos. Constr., vol. 20, no. 5, pp. 04016015, 2016. DOI: 10.1061/(ASCE)CC.1943-5614.0000669.
   Web of Science ®Google Scholar
• Ministry of Construction of the PRC, Standard for test method of mechanical properties on ordinary concrete, GB/T 50080, Beijing, 2016.
   Google Scholar
• American Society for Testing and Materials (ASTM), Standard test method for tensile properties of polymer matrix composite materials, ASTM D3039/D3039M-14, Philadelphia, 2014.
   Google Scholar
• American Society for Testing and Materials (ASTM), Test methods and definitions for mechanical testing of steel products, ASTM A37014, Philadelphia, 2014.
   Google Scholar
• R. Park, Evaluation of ductility of structures and structural assemblages from laboratory testing, Bull. N. Z. Soc. Earthq. Eng., vol. 22, no. 3, pp. 155–166, 1989. DOI: 10.5459/bnzsee.22.3.155-166.
   Google Scholar
• E. Carrera, R. Augello, A. Pagani, and X. Xu, Component-wise approach to reinforced concrete structures, Mech. Adv. Mater. Struct., vol. 28, pp. 1–19, 2021. DOI: 10.1080/15376494.2021.1912442.
   Web of Science ®Google Scholar
• T. Yu, Y. L. Wong, and J. G. Teng, Behavior of hybrid FRP-concrete-steel double-skin tubular columns subjected to eccentric compression, Adv. Struct. Eng., vol. 13, no. 5, pp. 961–974, 2010. DOI: 10.1260/1369-4332.13.5.961.
   Web of Science ®Google Scholar
• Ministry of Construction of the PRC, Technical code for infrastructure application of GRP composites, GB50608-2010, Beijing, 2010.
   Google Scholar