Effects of stacking sequences of non-hydrophobic cellulose nanofiber dispersion layer on impact properties of carbon fiber/cellulose nanofiber reinforced epoxy composite

References

• E. Maccaferri, L. Mazzocchetti, T. Benelli, T. M. Brugo, A. Zucchelli, and L. Giorgini, Rubbery nanofibrous interleaves enhance fracture toughness and damping of CFRP laminates, Mater. Des., vol. 195, pp. 109049, 2020. DOI: 10.1016/j.matdes.2020.109049.
   Web of Science ®Google Scholar
• J. H. Eun, D. H. Kim, and J. S. Lee, Effect of low melting temperature polyamide fiber-interlaced carbon fiber braid fabric on the mechanical performance and fracture toughness of CFRP laminates, Compos. A, vol. 137, pp. 105987, 2020. DOI: 10.1016/j.compositesa.2020.105987.
   Google Scholar
• E. Stelldinger, A. Kühhorn, and M. Kober, Experimental evaluation of the low-velocity impact damage resistance of CFRP tubes with integrated rubber layer, Compos. Struct., vol. 139, pp. 30–35, 2016. DOI: 10.1016/j.compstruct.2015.11.069.
   Web of Science ®Google Scholar
• V. Carvelli, A. Betti, and T. Fujii, Fatigue and Izod impact performance of carbon plain weave textile reinforced epoxy modified with cellulose microfibrils and rubber nanoparticles, Compos. A, vol. 84, pp. 26–35, 2016. DOI: 10.1016/j.compositesa.2016.01.005.
   Google Scholar
• K. Oksman, Y. Aitomäki, A. P. Mathew, G. Siqueira, Q. Zhou, S. Butylina, S. Tanpichai, X. Zhou, and S. Hooshmand, Review of the recent developments in cellulose nanocomposite processing, Compos. A: Appl. Sci. Manuf., vol. 83, pp. 2–18, 2016. DOI: 10.1016/j.compositesa.2015.10.041.
   Web of Science ®Google Scholar
• M. H. Gabr, M. Abd Elrahman, K. Okubo, and T. Fujii, Effect of microfibrillated cellulose on mechanical properties of plain-woven CFRP reinforced epoxy, Compos. Struct., vol. 92, no. 9, pp. 1999–2006, 2010. DOI: 10.1016/j.compstruct.2009.12.009.
   Web of Science ®Google Scholar
• A. Isogai, Emerging nanocellulose technologies: Recent developments, Adv. Mater., vol. 33, no. 28, pp. 2000630, 2021. DOI: 10.1002/adma.202000630.
   PubMed Web of Science ®Google Scholar
• P. Dhar and V. Katiyar, Cellulose Nanocrystals, 49–80, 2020, Walter de Gruyter, Berlin, Germany.
   Google Scholar
• K. Katagiri, S. Honda, T. Okumura, S. Yamaguchi, S. Kawakita, K. Kume, and K. Sasaki, Enhancement method of CFRP with the non-hydrophobized cellulose nanofibers using aqueous electrodeposition solution, Mech. Adv. Mater. Struct., pp. 1–8, 1934760, 2021. DOI: 10.1080/15376494.2021.1934760.
   Web of Science ®Google Scholar
• K. Katagiri, T. Okumura, S. Kawakita, H. Sonomura, S. Honda, and K. Sasaki, Enhancement of impact properties of CFRP by inserting the non-hydrophobized cellulose nanofiber dispersion layer using an aqueous solution of epoxy resin, Mech. Adv. Mater. Struct., pp. 1–10, 1954270, 2021. DOI: 10.1080/15376494.2021.1954270.
   Web of Science ®Google Scholar
• K. Katagiri, N. Kishimoto, T. Okumura, S. Kawakita, S. Honda, and K. Sasaki, Effects of cellulose nanofiber content on impact properties of carbon fiber reinforced epoxy composites with the cellulose nanofiber dispersion layer, Mech. Adv. Mater. Struct., pp. 1–9, 1972369, 2021. DOI: 10.1080/15376494.2021.1972369.
   Google Scholar
• M. A. S. Sujon, M. A. Habib, and M. Z. Abedin, Experimental investigation of the mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites, J. Mater. Res. Technol., vol. 9, no. 5, pp. 10970–10981, 2020. DOI: 10.1016/j.jmrt.2020.07.079.
   Google Scholar
• K. Yang, J. Guan, K. Numata, C. Wu, S. Wu, Z. Shao, and R. O. Ritchie, Integrating tough Antheraea pernyi silk and strong carbon fibres for impact-critical structural composites, Nat. Commun., vol. 10, no. 1, pp. 1–12, 2019. DOI: 10.1038/s41467-019-11520-2.
   PubMedGoogle Scholar
• H. Sakamoto, Environment friendly electrolyzed activate deposition material with a high electric insulation, J. Oleo Sci., vol. 5, no. 10, pp. 489–496, 2005. (in Japanese). DOI: 10.5650/oleoscience.5.489.
   Google Scholar
• R. Murakami, History and principles for electrodeposition coating, J. Surf. Finish. Soc. Jpn., vol. 53, no. 5, pp. 288–292, 2002. (in Japanese). DOI: 10.4139/sfj.53.288.
   Google Scholar
• ASTM D790-17, Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, West Conshohocken, PA, USA, 2017.
   Google Scholar
• S. Timoshenko, et al., Theory of Elasticity, 3rd ed., McGraw-Hill Book Company, New York, NY, USA, 1970.
   Google Scholar
• ISO 179-2 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test, Geneva, Switzerland, 2020.
   Google Scholar
• A. Fernandez-Canteli, A. Argüelles, J. Vina, M. Ramulu, and A. S. Kobayashi, Dynamic fracture toughness measurements in composites by instrumented Charpy testing, Compos. Sci. Technol., vol. 62, pp. 1315–1325, 2002.
   Web of Science ®Google Scholar
• A. Pegoretti, I. Cristelli, and C. Migliaresi, Experimental optimization of the impact energy absorption of epoxy–carbon laminates through controlled delamination, Compos. Sci. Technol., vol. 68, no. 13, pp. 2653–2662, 2008. DOI: 10.1016/j.compscitech.2008.04.036.
   Web of Science ®Google Scholar
• A. B. Reising, R. J. Moon, and J. P. Youngblood, Effect of particle alignment on mechanical properties of neat cellulose nanocrystal films, J. Sci. Technol. Forest Prod. Process., vol. 2, no. 6, pp. 32–41, 2012.
   Web of Science ®Google Scholar
• J. M. Lee, K. H. Lee, B. M. Kim, S. K. An, and D. C. Ko, Prediction of bending stiffness for laminated CFRP and its application to manufacturing of roof reinforcement, Adv. Mech. Eng., vol. 6, pp. 404176, 2014. DOI: 10.1155/2014/404176.
   Google Scholar
• M. Selezneva, Y. Swolfs, A. Katalagarianakis, T. Ichikawa, N. Hirano, I. Taketa, T. Karaki, I. Verpoest, and L. Gorbatikh, The brittle-to-ductile transition in tensile and impact behavior of hybrid carbon fibre/self-reinforced polypropylene composites, Compos. A, vol. 109, pp. 20–30, 2018. DOI: 10.1016/j.compositesa.2018.02.034.
   Google Scholar