Structure design of arc-shaped auxetic metamaterials with tunable Poisson’s ratio

References

• J. H. Lee, J. P. Singer, and E. L. Thomas, Micro-/nanostructured mechanical metamaterials, Adv. Mater., vol. 24, no. 36, pp. 4782–4810, 2012. DOI: 10.1002/adma.201201644.
   PubMed Web of Science ®Google Scholar
• J. U. Surjadi, L. Gao, H. Du, L. Xiang, X. Xiong, N. X. Fang, and L. Yang, Mechanical metamaterials and their engineering applications, Adv. Eng. Mater., vol. 21, no. 3, pp. 1800864, 2019. DOI: 10.1002/adem.201800864.
   Web of Science ®Google Scholar
• X. Li, and H. Gao, Mechanical metamaterials: smaller and stronger, Nat. Mater., vol. 15, no. 4, pp. 373–374, 2016. DOI: 10.1038/nmat4591.
   PubMed Web of Science ®Google Scholar
• T. C. Lim, Auxetic Materials and Structures, Springer, Singapore, 2015.
   Google Scholar
• T. C. Lim, Mechanics of Metamaterials with Negative Parameters, Springer, Singapore, 2020.
   Google Scholar
• D. Kochmann and K. Bertoldi, Exploiting microstructural instabilities in solids and structures: from metamaterials to structural transitions, Appl. Mech. Rev., vol. 69, pp. 050801, 2017.
   Web of Science ®Google Scholar
• K. Meena, and S. Singamneni, A new auxetic structure with significantly reduced stress concentration effects, Mater. Des., vol. 173, pp. 107779, 2019. DOI: 10.1016/j.matdes.2019.107779.
   Web of Science ®Google Scholar
• V. A. Gorodtsov, and D. S. Lisovenko, Auxetics among materials with cubic anisotropy, Mech Solids., vol. 55, no. 4, pp. 7–24, 2020.
   Web of Science ®Google Scholar
• N. Naik, J. Caves, E. L. Chaikof, and Mark G. Allen, Generation of spatially aligned collagen fiber networks through microtransfer molding, Adv. Healthc. Mater., vol. 3, no. 3, pp. 367–374, 2014. DOI: 10.1002/adhm.201300112.
   PubMed Web of Science ®Google Scholar
• Z. Hang, G. Xiaogang, W. Jun, F. Daining, and Z. Yihui, Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves, Sci. Adv., vol. 4, no. 6, pp. eaar8535 2018, no DOI: 10.1126/sciadv.aar8535.
   PubMed Web of Science ®Google Scholar
• K. Bertoldi, P. M. Reis, S. Willshaw, and T. Mullin, Negative Poisson's ratio behavior induced by an elastic instability, Adv. Mater., vol. 22, no. 3, pp. 361–366, 2010. DOI: 10.1002/adma.200901956.
   PubMed Web of Science ®Google Scholar
• R. F. Almgren, An isotropic three-dimensional structure with Poisson's ratio=-1, J Elasticity., vol. 15, no. 4, pp. 427–430, 1985.
   Web of Science ®Google Scholar
• A. G. Kolpakov, Determination of the average characteristics of elastic frameworks, J. Appl. Math. Mech., vol. 49, no. 6, pp. 739–745, 1985. DOI: 10.1016/0021-8928(85)90011-5.
   Google Scholar
• R. Lakes, Foam Structures with a Negative Poisson's Ratio, Science., vol. 235, no. 4792, pp. 1038–1040, 1987.
   PubMed Web of Science ®Google Scholar
• Lubensky, Tom, Gaoxiang, Choi, In-Suk, Cho, Y. Yang, and Shu Ju, Directing the Deformation Paths of Soft Metamaterials with Prescribed Asymmetric Units, Adv. Mater., vol. 27, no. 17, pp. 2747–2752, 2015. DOI: 10.1002/adma.201500716.
   PubMed Web of Science ®Google Scholar
• T. Li, and L. Wang, Bending behavior of sandwich composite structures with tunable 3D-printed core materials, Compos. Struct., vol. 175, pp. 46–57, 2017. DOI: 10.1016/j.compstruct.2017.05.001.
   Web of Science ®Google Scholar
• Hong Hu, Minglonghai Zhang, and Yanping Liu, 4 - Auxetic fibres and yarns. In The Textile Institute Book Series, Auxetic Textiles, Woodhead Publishing, Sawston, Cambridge, 2019.
   Google Scholar
• S. H. Kang, S. Shan, W. L. Noorduin, M. Khan, J. Aizenberg, and K. Bertoldi, Buckling-induced reversible symmetry breaking and amplification of chirality using supported cellular structures, Adv. Mater., vol. 25, no. 24, pp. 3380–3385, 2013. DOI: 10.1002/adma.201300617.
   PubMed Web of Science ®Google Scholar
• J. N. Grima, S. Winczewski, L. Mizzi, M. C. Grech, R. Cauchi, R. Gatt, D. Attard, K.W. Wojciechowski, and Jaroslaw Rybicki, Tailoring graphene to achieve negative poisson's ratio properties, Adv. Mater., vol. 27, no. 8, pp. 1455–1459, 2015. DOI: 10.1002/adma.201404106.
   PubMed Web of Science ®Google Scholar
• L. Kou, Y. Ma, C. Tang, Z. Sun, A. Du, and C. Chen, Auxetic and ferroelastic borophane: a novel 2d material with negative possion's ratio and switchable dirac transport channels, Nano Lett., vol. 16, no. 12, pp. 7910–7914, 2016. DOI: 10.1021/acs.nanolett.6b04180.
   PubMed Web of Science ®Google Scholar
• T. Bückmann, N. Stenger, M. Kadic, J. Kaschke, A. Frölich, T. Kennerknecht, C. Eberl, M. Thiel, and M. Wegener, Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography, Adv. Mater., vol. 24, no. 20, pp. 2710–2714, 2012. DOI: 10.1002/adma.201200584.
   PubMed Web of Science ®Google Scholar
• P. Chen, H. Cai, Z. Li, M. Li, and Y. Shi, Crystallization kinetics of polyetheretherketone during high temperature-selective laser sintering, Addit. Manuf., vol. 36, pp. 101615, 2020.
   Web of Science ®Google Scholar
• Chunze Yan, Gao Ma, Annan Chen, Ying Chen, Jiamin Wu, Wei Wang, Shoufeng Yang and Yusheng Shi, Additive manufacturing of hydroxyapatite and its composite materials: a review, J. Micromech. Mol. Phys., vol. 05, no. 03, pp. 2030002, 2020. DOI: 10.1142/S2424913020300029.
   Google Scholar
• Kolken, H. M. Zadpoor, A, and A. Auxetic mechanical metamaterials, RSC Adv., vol. 7, no. 9, pp. 5111–5129, 2017. DOI: 10.1039/C6RA27333E.
   Web of Science ®Google Scholar
• M. Kadic, G. W. Milton, M. Van Hecke, and M. Wegener, 3D metamaterials, Nat. Rev. Phys., vol. 1, no. 3, pp. 198–210, 2019. DOI: 10.1038/s42254-018-0018-y.
   Google Scholar
• Chen Luo, ChuanZhen Han, XiangYu Zhang, XueGang Zhang, Xin Ren, and YiMin Xie, manufacturing and applications of auxetic tubular structures: a review, Thin. Wall. Struct., vol. 163, no. 6340, pp. 107682, 2021. DOI: 10.1016/j.tws.2021.107682.
   Google Scholar
• J. N. Grima, R. Gatt, A. Alderson, and K. E. Evans, On the potential of connected stars as auxetic systems, Mol. Simul., vol. 31, no. 13, pp. 925–935, 2005. DOI: 10.1080/08927020500401139.
   Web of Science ®Google Scholar
• A. A. Pozniak, and K. W. Wojciechowski, Poisson's ratio of rectangular anti-chiral structures with size dispersion of circular nodes, Phys. Status Solidi B., vol. 251, no. 2, pp. 367–374, 2014. DOI: 10.1002/pssb.201384256.
   Google Scholar
• Wenwang Wu, Wenxia Hu, Guian Qian, Haitao Liao, Xiaoying Xu, and Filippo Berto, Mechanical design and multifunctional applications of chiral mechanical metamaterials: a review, Mater. Des., vol. 180, no. 107950, pp. 107950, 2019. DOI: 10.1016/j.matdes.2019.107950.
   Google Scholar
• R. V. Goldstein, V. A. Gorodtsov, and D. S. Lisovenko, Chiral elasticity of nano/microtubes from hexagonal crystals, Acta Mech., vol. 229, no. 5, pp. 2189–2201, 2018. DOI: 10.1007/s00707-017-2088-9.
   Web of Science ®Google Scholar
• A. Bacigalupo and L. Gambarotta, Homogenization of periodic hexa- and tetrachiral cellular solids, Compos. Struct., vol. 116, no. 1, pp. 461–476, 2014. DOI: 10.1016/j.compstruct.2014.05.033.
   Google Scholar
• R. Lakes, Deformation mechanisms in negative Poisson’s ratio materials: structural aspects, J. Mater. Sci., vol. 26, no. 9, pp. 2287–2292, 1991. DOI: 10.1007/BF01130170.
   Web of Science ®Google Scholar
• JosephN. Grima, Pierre-Sandre Farrugia, Ruben Gatt, and Daphne Attard, On the auxetic properties of rotating rhombi and parallelograms: a preliminary investigation, Phys. stat. sol. (b)., vol. 245, no. 3, pp. 521–529, 2008. DOI: 10.1002/pssb.200777705.
   Web of Science ®Google Scholar
• J. N. Grima, A. Alderson, and K. E. Evans, Auxetic behaviour from rotating rigid units, Phys. stat. sol. (b)., vol. 242, no. 3, pp. 561–575, 2005. DOI: 10.1002/pssb.200460376.
   Web of Science ®Google Scholar
• C. Huang, and L. Chen, Negative Poisson’s ratio in modern functional materials, Adv. Mater., vol. 28, no. 37, pp. 8079–8096, 2016. DOI: 10.1002/adma.201601363.
   PubMed Web of Science ®Google Scholar
• Li Yang, Ola Harrysson, Harvey West, and Denis Cormier, Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing, Int. J. Solids Struct., vol. 69/70, pp. 475–490, 2015. vol DOI: 10.1016/j.ijsolstr.2015.05.005.
   Web of Science ®Google Scholar
• W. Wu, D. Qi, H. Liao, G. Qian, L. Geng, Y. Niu, and J. Liang, Deformation mechanism of innovative 3D chiral metamaterials, Sci. Rep., vol. 8, no. 1, p. 12575, 2018.
   PubMedGoogle Scholar
• Tiantian Li, Yanyu Chen, Xiaoyi Hu, Yangbo Li, and Lifeng Wang, Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties, Mater. Des., vol. 142, pp. 247–258, 2018. DOI: 10.1016/j.matdes.2018.01.034.
   Web of Science ®Google Scholar
• Qiang Gao, Liangmo Wang, Ze Zhou, Z. D. Ma, Chenzhi Wang, and Yuanlong Wang, Theoretical, numerical and experimental analysis of three-dimensional double-V honeycomb, Mater. Des., vol. 139, pp. 380–391, 2018. DOI: 10.1016/j.matdes.2017.11.024.
   Web of Science ®Google Scholar
• K. I. Jang, H. U. Chung, S. Xu, C. H. Lee, H. Luan, J. Jeong, H. Cheng, G. T. Kim, S. Y. Han, and J. W. Lee, Soft network composite materials with deterministic and bio-inspired designs, Nat. Commun., vol. 6, no. 1, pp. 6566, 2015.
   PubMedGoogle Scholar
• Y. Jiang, Z. Liu, N. Matsuhisa, D. Qi, W. R. Leow, H. Yang, J. Yu, G. Chen, Y. Liu, and C. Wan, Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors, Adv. Mater., vol. 30, no. 12, pp. 1706589, 2018. DOI: 10.1002/adma.201706589.
   Web of Science ®Google Scholar
• Y. Chen, T. Li, F. Scarpa, and L. Wang, Lattice metamaterials with mechanically tunable Poisson’s ratio for vibration control, Phys. Rev. Appl., vol. 7, no. 2, pp. 024012, 2017.
   Web of Science ®Google Scholar
• D. Y. Fozdar, P. Soman, J. W. Lee, Han Li-Hsin, and Chen Shaochen, Three-dimensional polymer constructs exhibiting a tunable negative Poisson’s ratio, Adv. Funct. Mater., vol. 21, no. 14, pp. 2712–2720, 2011. DOI: 10.1002/adfm.201002022.
   PubMed Web of Science ®Google Scholar
• M. Lei, W. Hong, Z. Zhao, C. M. Hamel, and H. J. Qi, 3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape, ACS Appl. Mater. Interfaces., vol. 11, no. 25, pp. 22768–22776, 2019.
   PubMed Web of Science ®Google Scholar