Interacting stress of multiple random elliptical holes under remote and arbitrary surface stresses

References

• F. Yang, J. Zhang, J. Yang, L. H. Zhao, and X. C. Zheng, Stability analysis of unlined elliptical tunnel using finite element upper-bound method with rigid translatory moving elements, Tunn. Undergr. Sp. Tech., vol. 50, pp. 13–22, 2015. DOI: 10.1016/j.tust.2015.06.005.
   Web of Science ®Google Scholar
• S. Alevizos, T. Poulet, M. Sari, M. Lesueur, and M. Veveakis, A framework for fracture network formation in overpressurised impermeable shale: deformability versus diagnosis, Rock. Mech. Rock. Eng., vol. 50, no. 3, pp. 1–15, 2016.
   Web of Science ®Google Scholar
• J. Zhang, F. Yang, J. Yang, X. C. Zheng, and F. X. Zeng, Upper-bound stability analysis of dual unlined elliptical tunnels in cohesive-frictional soils, Comput. Geotech., vol. 80, pp. 283–289, 2016. DOI: 10.1016/j.compgeo.2016.08.023.
   Web of Science ®Google Scholar
• H. N. Wang, S. Utili, M. J. Jiang, and P. He, Correction to: analytical solutions for tunnels of elliptical cross-section in rheological rock accounting for sequential excavation, Rock Mech Rock Eng., vol. 53, no. 6, pp. 2685–2685, 2020. DOI: 10.1007/s00603-020-02055-w.
   Web of Science ®Google Scholar
• G. F. Wang, and T. J. Wang, Deformation around a nanosized elliptical hole with surface effect, Appl. Phys. Lett., vol. 89, no. 16, pp. 161901–161972, 2006. DOI: 10.1063/1.2362988.
   Web of Science ®Google Scholar
• C. K. Chao, L. M. Lu, A. C. K. Chen, and F. M. Chen, Analytical solution for a reinforcement layer bonded to an elliptic hole under a remote uniform load, Int. J. Solids. Struct., vol. 46, no. 14/15, pp. 2959–2965, 2009. DOI: 10.1016/j.ijsolstr.2009.03.025.
   Web of Science ®Google Scholar
• J. W. Fu, and H. D. Haeri, et al., Extended finite element method simulation and experimental test on failure behavior of defects under uniaxial compression, Mech. Adv. Mater. Strcu., pp. 1989730, 2021. DOI: 10.1080/15376494.2021.1989730.
   Google Scholar
• J. H. Kang, Exact solutions of stresses, strains, and displacements of a perforated rectangular plate by a central circular hole subjected to linearly varying in-plane normal stresses on two opposite edges, Int. J. Mech. Sci., vol. 84, pp. 18–24, 2014. DOI: 10.1016/j.ijmecsci.2014.03.023.
   Web of Science ®Google Scholar
• W. Yi, Q. H. Rao, S. Luo, Q. Q. Shen, and Z. Li, A new integral equation method for calculating interacting stress intensity factor of multiple crack-hole problem, Theoret. Appl. Fract. Mech., vol. 107, pp. 102535, 2020. DOI: 10.1016/j.tafmec.2020.102535.
   Web of Science ®Google Scholar
• R. A. W. Haddon, Stresses in an infinite plate with two unequal circular holes, Q J Mechanics Appl Math., vol. 20, no. 3, pp. 277–291, 1967. DOI: 10.1093/qjmam/20.3.277.
   Google Scholar
• R. C. J. Howland, and R. C. Kight, Stress functions for a plate containing groups of circular holes, Phil. Trans. R. Soc., vol. 238, no. 793, pp. 357–392, 1939.
   Google Scholar
• A. E. Green, Note on general bi-harmonic analysis for a plate containing circular holes, Math. Proc. Camb. Phil. Soc., vol. 37, no. 1, pp. 29–33, 1941. DOI: 10.1017/S0305004100021502.
   Google Scholar
• H. Horii, and S. Nemat-Nasser, Elastic fields of interacting inhomogeneities, Int. J. Solids. Struct., vol. 21, no. 7, pp. 731–745, 1985. DOI: 10.1016/0020-7683(85)90076-9.
   Web of Science ®Google Scholar
• J. Helsing, and A. Jonsson, Stress calculations on multiply connected domains, J. Comput. Phys., vol. 176, no. 2, pp. 456–482, 2002. DOI: 10.1006/jcph.2002.6996.
   Web of Science ®Google Scholar
• G. B. Jeffery, Plane stress and plane strain in bipolar co-ordinates, Phil. Trans. R. Soc., vol. 221, pp. 265–293, 1921.
   Google Scholar
• C. B. Ling, On the stresses in a plate containing two circular holes, J. Appl. Phys., vol. 19, no. 1, pp. 77–80, 1948. DOI: 10.1063/1.1697875.
   Web of Science ®Google Scholar
• Z. P. Duan, R. Kienzler, and G. Herrmann, An integral equation method and its application to defect mechanics, J. Mech. Phys. Solids., vol. 34, no. 6, pp. 539–561, 1986. DOI: 10.1016/0022-5096(86)90036-0.
   Web of Science ®Google Scholar
• S. A. Meguid, and C. L. Shen, On the elastic fields of interacting defense and main hole systems, Int. J. Mech. Sci., vol. 34, no. 1, pp. 17–29, 1992. DOI: 10.1016/0020-7403(92)90050-Q.
   Web of Science ®Google Scholar
• K. Ting, K. T. Chen, and W. S. Yang, Applied alternating method to analyze the stress concentration around interacting multiple circular holes in an infinite domain, Int. J. Solids. Struct., vol. 36, no. 4, pp. 533–556, 1999. DOI: 10.1016/S0020-7683(98)00031-6.
   Web of Science ®Google Scholar
• R. W. Zimmerman, Second-order approximation for the compression of an elastic plate containing a pair of circular holes, Z. angew. Math. Mech., vol. 68, no. 11, pp. 575–577, 1988. DOI: 10.1002/zamm.19880681122.
   Web of Science ®Google Scholar
• Y. Huang, S. L. Crouch, and S. G. Mogilevskaya, Direct boundary integral procedure for a Boltzmann viscoelastic plane with circular holes and elastic inclusions, Comput Mech., vol. 37, no. 1, pp. 110–118, 2005. DOI: 10.1007/s00466-005-0703-4.
   Web of Science ®Google Scholar
• J. Wang, S. L. Crouch, and S. G. Mogilevskaya, A complex boundary integral method for multiple circular holes in an infinite plane, Eng. Anal. Bound. Elem., vol. 27, no. 8, pp. 789–802, 2003. DOI: 10.1016/S0955-7997(03)00043-2.
   Web of Science ®Google Scholar
• T. Iwaki, and K. Miyao, Stress concentrations in a plate with two unequal circular holes, Int. J. Eng. Sci., vol. 18, no. 8, pp. 1077–1090, 1980.
   Web of Science ®Google Scholar
• S. K. Hoang, and Y. N. Abousleiman, Extended Green's solution for the stresses in an infinite plate with two equal or unequal circular holes, J. Appl. Mech., vol. 75, no. 3, pp. 031016–031013, 2008. DOI: 10.1115/1.2793803.
   Web of Science ®Google Scholar
• E. Radi, Path-independent integrals around two circular holes in an infinite plate under biaxial loading conditions, Int. J. Eng. Sci., vol. 49, no. 9, pp. 893–914, 2011. DOI: 10.1016/j.ijengsci.2011.04.011.
   Web of Science ®Google Scholar
• A. Z. Lu, Z. Xu, and N. Zhang, Stress analytical solution for an infinite plane containing two holes, Int. J. Mech. Sci., vol. 128/129, no. 9, pp. 224–234, 2017. DOI: 10.1016/j.ijmecsci.2017.04.025.
   Google Scholar
• N. Jones, and D. Hozos, A study of the stresses around elliptical holes in flat plates, J. Eng. Ind., vol. 93, no. 2, pp. 688–696, 1971. DOI: 10.1115/1.3427982.
   Google Scholar
• X. L. Han, and Z. Q. Wang, Elastic fields of interacting elliptic inhomogeneities, Int. J. Solids. Struct., vol. 36, no. 30, pp. 4523–4541, 1999.
   Web of Science ®Google Scholar
• H. Wang, and Q. H. Qin, A new special element for stress concentration analysis of a plate with elliptical holes, Acta Mech., vol. 223, no. 6, pp. 1323–1340, 2012. DOI: 10.1007/s00707-012-0650-z.
   Web of Science ®Google Scholar
• N. A. Noda, and T. Matsumo, Singular integral equation method for interaction between elliptic inclusions, ASME J. Appl. Mech., vol. 65, no. 2, pp. 310–319, 1998. DOI: 10.1115/1.2789056.
   Web of Science ®Google Scholar
• K. Ting, K. T. Chen, and W. S. Yang, Boundary element alternating method applied to analyze the stress concentration problems of multiple elliptical holes in an infinite domain, Nucl. Eng. Des., vol. 187, no. 3, pp. 303–313, 1999. DOI: 10.1016/S0029-5493(98)00301-X.
   Web of Science ®Google Scholar
• V. I. Kushch, S. V. Shmegera, and V. A. Buryachenko, Interacting elliptic inclusions by the method of complex potentials, Int. J. Solids Struct., vol. 42, no. 20, pp. 5491–5512, 2005. DOI: 10.1016/j.ijsolstr.2005.02.035.
   Web of Science ®Google Scholar
• L. Q. Zhang, Z. Q. Yue, C. F. Lee, L. G. Tham, and Z. F. Yang, Stress solution of multiple elliptic hole problem in plane elasticity, J. Eng. Mech., vol. 129, no. 12, pp. 1394–1407, 2003. DOI: 10.1061/(ASCE)0733-9399(2003)129:12(1394).
   Web of Science ®Google Scholar
• A. S. Kosmodamianskii, and V. I. Chernik, Stress state of a plate weakened by two elliptical holes with parallel axes, Sov. Appl. Mech., vol. 17, no. 6, pp. 576–581, 1981. DOI: 10.1007/BF00885716.
   Google Scholar
• V. G. Ukadgaonker, and D. B. Patil, Stress analysis of a plate containing two elliptical holes subjected to uniform pressure and tangential stresses at the boundaries, J. Eng. Ind., vol. 115, no. 1, pp. 93–101, 1993. DOI: 10.1115/1.2901644.
   Google Scholar
• L. Q. Zhang, A. Z. Lu, Z. Q. Yue, Z. Q. Yue, and Z. F. Yang, An efficient and accurate iterative stress solution for an infinite elastic plate around two elliptic holes, subjected to uniform loads on the hole boundaries and at infinity, Eur. J. Mech. A–Solid., vol. 28, no. 1, pp. 189–193, 2009. DOI: 10.1016/j.euromechsol.2008.04.003.
   Web of Science ®Google Scholar
• X. T. Zeng, A. Z. Lu, and N. Zhang, Analytical stress solution for an infinite plate containing two oval holes, Eur. J. Mech. A–Solid., vol. 67, pp. 291–304, 2018. DOI: 10.1016/j.euromechsol.2017.09.011.
   Web of Science ®Google Scholar
• M. Dai, and C. F. Gao, Perturbation solution of two arbitrarily-shaped holes in a piezoelectric solid, Int. J. Mech. Sci., vol. 88, pp. 37–45, 2014. DOI: 10.1016/j.ijmecsci.2014.06.015.
   Web of Science ®Google Scholar
• M. Dai, and H. Y. Sun, Thermo-elastic analysis of a finite plate containing multiple elliptical inclusions, Int. J. Mech. Sci., vol. 75, pp. 337–344, 2013. DOI: 10.1016/j.ijmecsci.2013.07.012.
   Web of Science ®Google Scholar
• X. Wang, and P. Schiavone, Two circular inclusions with arbitrarily varied surface effects, Acta Mech., vol. 226, no. 5, pp. 1471–1486, 2015. DOI: 10.1007/s00707-014-1264-4.
   Web of Science ®Google Scholar
• H. B. Yang, M. Dai, and C. F. Gao, Stress field in a porous material containing periodic arbitrarily-shaped holes with surface tension, Math. Mech. Solids., vol. 23, no. 1, pp. 120–130, 2018. DOI: 10.1177/1081286516680864.
   Web of Science ®Google Scholar
• S. Wang, C. F. Gao, and Z. T. Chen, Interaction between two nanoscale elliptical holes with surface tension, Math. Mech. Solids, vol. 24, no. 5, pp. 1556–1566, 2019. DOI: 10.1177/1081286518801051.
   Web of Science ®Google Scholar
• S. Wang, H. B. Hai, C. F. Gao, and Z. T. Chen, In-plane stress analysis of two nanoscale holes under surface tension, Arch Appl Mech., vol. 90, no. 6, pp. 1363–1372, 2020. DOI: 10.1007/s00419-020-01672-9.
   Web of Science ®Google Scholar
• W. Yi, Q. H. Rao, D. L. Sun, Q. Q. Shen, and J. Zhang, A new integral equation method for calculating interacting stress-intensity factors of multiple holed-cracked anisotropic rock under both far-field and arbitrary surface stresses, Int. J. Rock. Mech. Min. Sci., vol. 148, no. 3, pp. 104926, 2021. DOI: 10.1016/j.ijrmms.2021.104926.
   Google Scholar
• W. Yi, Q. H. Rao, Wb. Ma, D. L. Sun, and Q. Q. Shen, A new analytical-numerical method for calculating interacting stresses of a multi-hole problem under both remote and arbitrary surface stresses, Appl. Math. Mech.-Engl. Ed., vol. 41, no. 10, pp. 1539–1560, 2020. DOI: 10.1007/s10483-020-2653-9.
   Google Scholar
• N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity, P Noordhooff, Netherlands, 1962.
   Google Scholar
• K. J. Bathe, Finite Element Method. John Wiley and Sons Inc., New Jersey, 2000.
   Google Scholar
• K. Khatri, and A. Lal, Stochastic XFEM fracture and crack propagation behavior of an isotropic plate with hole emanating radial cracks subjected to various in-plane loadings, Mech. Adv. Mater. Struc., vol. 25, no. 9, pp. 732–755, 2018. DOI: 10.1080/15376494.2017.1308599.
   Web of Science ®Google Scholar
• M. S. Mohamed, O. Laghrouche, and A. El-Kacimi, Some numerical aspects of the PUFEM for efficient solution of 2D Helmholtz problems, Comput. Struct., vol. 88, no. 23-24, pp. 1484–1491, 2010. DOI: 10.1016/j.compstruc.2010.01.012.
   Web of Science ®Google Scholar
• K. B. Yilmaz, A. Kucuksucu, K. B. Yilmaz, and B. Yildirim, On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium, Int. J. Mech. Sci., vol. 120, pp. 12–29, 2017. DOI: 10.1016/j.ijmecsci.2016.11.004.
   Web of Science ®Google Scholar
• W. B. Ma, Y. L. Chen, W. Yi, and S. C. Guo, Investigation on crack evolution behaviors and mechanism on rock-like specimen with two circular-holes under compression, Theor, Appl. Fract. Mech., vol. 118, pp. 103222, 2022. DOI: 10.1016/j.tafmec.2021.103222.
   Web of Science ®Google Scholar
• A. Z. Lu, X. Zeng, and Z. Xu, Solution for a circular cavity in an elastic half plane under gravity and arbitrary lateral stress, Int. J. Rock. Mech. Min., vol. 89, pp. 34–42, 2016. DOI: 10.1016/j.ijrmms.2016.08.004.
   Web of Science ®Google Scholar