Effects of a circular hole on the propagation behavior of double running cracks under impact loading

References

• D. Gross, and T. Seelig, Dynamic fracture mechanics. In: Fracture Mechanics, Mechanical Engineering Series, Springer, Berlin, Germany, pp. 207–228, 2011.
   Google Scholar
• M. Tao, A. Ma, W. Cao, X. Li, and F. Gong, Dynamic response of pre-stressed rock with a circular cavity subject to transient loading, Int. J. Rock Mech. Min. Sci., vol. 99, pp. 1–8, 2017. DOI: 10.1016/j.ijrmms.2017.09.003.
   Web of Science ®Google Scholar
• G. Mishuris, A. Movchan, N. Movchan, and A. Piccolroaz, Interaction of an interfacial crack with linear small defects under out-of-plane shear loading, Int. J. Comput. Mater. Sci. Surf. Eng., vol. 52, no. 1, pp. 226–230, 2012. DOI: 10.1016/j.commatsci.2011.01.023.
   Web of Science ®Google Scholar
• M. Li, Z. Zhu, R. Liu, B. Liu, L. Zhou, and Y. Dong, Study of the effect of empty holes on propagating cracks under blasting loads, Int. J. Rock Mech. Min. Sci., vol. 103, pp. 186–194, 2018. DOI: 10.1016/j.ijrmms.2018.01.043.
   Web of Science ®Google Scholar
• J. Milios, and G. Spathis, Dynamic interaction of a propagating crack with a hole boundary, Acta Mech., vol. 72, no. 3–4, pp. 283–295, 1988. DOI: 10.1007/BF01178314.
   Web of Science ®Google Scholar
• K. Ishikawa, A. K. Green, and P. L. Pratt, Interaction of a rapidly moving crack with a small hole in polymethylmethacrylate, J. Strain Anal. Eng. Des., vol. 9, no. 4, pp. 233–237, 1974. DOI: 10.1243/03093247V094233.
   Google Scholar
• D. Li, T. Cheng, T. Zhou, and X. Li, Experimental study of the dynamic strength and fracturing characteristics of marble specimens with a single hole under impact loading, Yanshilixue Yu Gongcheng Xuebao/Chin. J. Rock Mech. Eng., vol. 34, no. 2, pp. 249–260, 2015. DOI: 10.13722/j.cnki.jrme.2015.02.004.
   Google Scholar
• R. Yang, P. Xu, Z. Yue, and C. Chen, Dynamic fracture analysis of crack-defect interaction for mode I running crack using digital dynamic caustics method, Eng. Fract. Mech., vol. 161, pp. 63–75, 2016. DOI: 10.1016/j.engfracmech.2016.04.042.
   Web of Science ®Google Scholar
• R. S. Yang, C. X. Ding, L. Y. Yang, P. Xu, and C. Chen, Hole defects affect the dynamic fracture behavior of nearby running cracks, Shock Vib., vol. 2018, pp. 1–8, 2018. DOI: 10.1155/2018/5894356.
   Web of Science ®Google Scholar
• Z. Zhang, J. Zuo, and Y. Guo, Crack propagation behavior of empty hole defects under blast load, Zhendong yu Chongji/J. Vib. Shock., vol. 39, no. 3, pp. 111–119, 2020. DOI: 10.13465/j.cnki.jvs.2020.03.015.
   Google Scholar
• F. Wang, M. Wang, M. M. Nezhad, H. Qiu, P. Ying, and C. Niu, Rock dynamic crack propagation under different loading rates using improved single cleavage semi-circle specimen, Appl. Sci. (Switzerland)., vol. 9, no. 22, pp. 4944, 2019. DOI: 10.3390/app9224944.
   Google Scholar
• L. Wang, et al., Study the effect of circular hole on dynamic fracture properties of cracked PMMA specimen under impact loads, Int. J. Impact Eng., vol. 156, pp. 103948, 2021. DOI: 10.1016/j.ijimpeng.2021.103948.
   Web of Science ®Google Scholar
• C. N. I. Habeeb, and S. Osovski, Experimental and numerical study of the interaction between dynamically loaded cracks and pre-existing flaws in edge impacted PMMA specimens, Int. J. Impact Eng., vol. 157, pp. 103973, 2021. DOI: 10.1016/j.ijimpeng.2021.103973.
   Web of Science ®Google Scholar
• X. J. Fang, and F. Jin, Extended finite element method based on ABAQUS, Gong Cheng Li Xue/Eng. Mech.., vol. 24, no. 7, pp. 6–10, 2007.
   Google Scholar
• Y. Wang, R. Yang, and G. Zhao, Influence of empty hole on crack running in PMMA plate under dynamic loading, Polym. Test., vol. 58, pp. 70–85, 2017. DOI: 10.1016/j.polymertesting.2016.11.020.
   Web of Science ®Google Scholar
• W. Gao, et al., Influence of the interlaced holes on crack propagation behavior under impact loads, Int. J. Impact Eng., vol. 163, pp. 104178, 2022. DOI: 10.1016/j.ijimpeng.2022.104178.
   Web of Science ®Google Scholar
• ZhenWen Jang, Shui Wan, and Chen Cheng, Analysis of the crack propagation based on extended finite method, AMM., vol. 275–277, pp. 169–173, 2013. DOI: 10.4028/www.scientific.net/AMM.275-277.169.
   Google Scholar
• Aniello Riccio, Umberto Caruso, Antonio Raimondo, and Andrea Sellitto, Robustness of XFEM method for the simulation of cracks propagation in fracture mechanics problems, Am. J. Appl. Sci., vol. 9, no. 3, pp. 599–610, 2016. DOI: 10.3844/ajeassp.2016.599.610.
   Google Scholar
• P. S. Theocaris, and N. P. Andrianopoulos, Dynamic three-point bending of short beams studied by caustics, Int. J. Solids Struct., vol. 17, no. 7, pp. 707–715, 1981. DOI: 10.1016/0020-7683(81)90007-X.
   Web of Science ®Google Scholar
• X. Yao, J. Chen, G. Jin, K. Arakawa, and K. Takahashi, Caustic analysis of stress singularities in orthotropic composite materials with mode-I crack, Compos. Sci. Technol., vol. 64, no. 7–8, pp. 917–924, 2004. DOI: 10.1016/S0266-3538(02)00154-9.
   Web of Science ®Google Scholar
• P. Qiu, Z. Yue, R. Yang, and Y. Ju, Modified mixed-mode caustics interpretation to study a running crack subjected to obliquely incident blast stress waves, Int. J. Impact Eng., vol. 150, pp. 103821, 2021. DOI: 10.1016/j.ijimpeng.2021.103821.
   Web of Science ®Google Scholar
• P. Qiu, Z. Yue, and R. Yang, Mode I stress intensity factors measurements in PMMA by caustics method: A comparison between low and high loading rate conditions, Polym. Test., vol. 76, pp. 273–285, 2019. DOI: 10.1016/j.polymertesting.2019.03.029.
   Web of Science ®Google Scholar
• M. R. Ayatollahi, M. R. M. Aliha, and M. M. Hassani, Mixed mode brittle fracture in PMMA – An experimental study using SCB specimens, Mater. Sci. Eng., A., vol. 417, no. 1–2, pp. 348–356, 2006. DOI: 10.1016/j.msea.2005.11.002.
   Web of Science ®Google Scholar
• Z. W. Yue, L. Y. Yang, and Y. B. Wang, Experimental study of crack propagation in polymethyl methacrylate material with double holes under the directional controlled blasting, Fatigue Fract Engng Mater Struct., vol. 36, no. 8, pp. 827–833, 2013. DOI: 10.1111/ffe.12049.
   Web of Science ®Google Scholar
• R. Zhang, R. Guo, and S. Wang, Mixed mode fracture study of PMMA using digital gradient sensing method, Eng. Fract. Mech., vol. 119, pp. 164–172, 2014. DOI: 10.1016/j.engfracmech.2014.02.020.
   Web of Science ®Google Scholar
• D. Wan, Z. Zhu, R. Liu, B. Liu, and J. Li, Measuring method of dynamic fracture toughness of mode I crack under blasting using a rectangle specimen with a crack and edge notches, Int. J. Rock Mech. Min. Sci., vol. 123, pp. 104104, 2019. DOI: 10.1016/j.ijrmms.2019.104104.
   Web of Science ®Google Scholar
• Z. Yue, P. Qiu, R. Yang, S. Zhang, K. Yuan, and Z. Li, Stress analysis of the interaction of a running crack and blasting waves by caustics method, Eng. Fract. Mech., vol. 184, pp. 339–351, 2017. DOI: 10.1016/j.engfracmech.2017.08.037.
   Web of Science ®Google Scholar
• H. H. N. Chen, R. K. L. Su, S. L. Fok, and H. G. Zhang, Fracture behavior of nuclear graphite under three-point bending tests, Eng. Fract. Mech., vol. 186, pp. 143–157, 2017. DOI: 10.1016/j.engfracmech.2017.09.030.
   Web of Science ®Google Scholar
• R. Liu, Y. Du, Z. Zhu, and C. Zhou, Effect of crack length on mode I crack propagation under blasting loads, Theor. Appl. Fract. Mech., vol. 118, pp. 103277, 2022. DOI: 10.1016/j.tafmec.2022.103277.
   Web of Science ®Google Scholar