Diagnosis of femoral implant loosening after total hip replacement by analysis of natural frequency

References

• N.P. Hailer, G. Garellick, and J. Kärrholm, Uncemented and cemented primary total hip arthroplasty in the Swedish Hip Arthroplasty Register: Evaluation of 170,413 operations, Acta Orthop., vol. 81, no. 1, pp. 34–41, 2010. DOI: 10.3109/17453671003685400.
   Web of Science ®Google Scholar
• S.D.R.C. Brocai and M. Lukoschek, Hüftgelenk Diagnostik der Hüftendoprothesenlockerung – Sensitivität klinischer Parameter *, Z. Orthop, vol. 136, no. 1, pp. 39–43, 1991.
   Google Scholar
• S. Hosseini, R. Claramunt, and A. Ros, Non‐invasive technologies for diagnostics of orthopaedic implant fixation, Med. Devices Sensors., vol. 3, no. 6, pp. 1–16, 2020.
   Google Scholar
• G. Van Der Perre and G. Lowet, In vivo assessment of bone mechanical properties by vibration and ultrasonic wave propagation analysis, Bone, vol. 18, no. 1, pp. S29–S35, 1996. DOI: 10.1016/8756-3282(95)00377-0.
   PubMed Web of Science ®Google Scholar
• G. Sztrinkai, T. Bodzay, S. Pajor, P. Erdös, Z. Vendégh, Z. Jónás, and K. Váradi, Further development of our finite element pelvic model to compare fixation methods for pelvic fractures. Eklem Hastalik Cerrahisi. vol. 25, no. 1, pp. 8–14, 2014. DOI: 10.5606/ehc.2014.03.
   Google Scholar
• J.L. Cunningham, Vibration analysis. In: Njeh, C.M. Langton and C.F. (eds.), The Physical Measurement of Bone, CRC Press, Boca Raton, pp. 511–548, 2016.
   Google Scholar
• L.C. Pastrav, S.V. Jaecques, I. Jonkers, G. Van Der Perre, and M. Mulier, In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses, J. Orthop. Surg. Res., 2009.
   PubMedGoogle Scholar
• Y. Nakatsuchi, A. Tsuchikane, and A. Nomura, The vibrational mode of the tibia and assessment of bone union in experimental fracture healing using the impulse response method, Med. Eng. Phys., vol. 18, no. 7, pp. 575–583, 1996. DOI: 10.1016/1350-4533(96)00010-0.
   PubMed Web of Science ®Google Scholar
• J.S. Rieger, S. Jaeger, C. Schuld, J.P. Kretzer, and R.G. Bitsch, A vibrational technique for diagnosing loosened total hip endoprostheses: An experimental sawbone study, Med. Eng. Phys., vol. 35, no. 3, pp. 329–337, 2013. DOI: 10.1016/j.medengphy.2012.05.007.
   PubMed Web of Science ®Google Scholar
• B. Bediz, H.N. Özgüven, and F. Korkusuz, Vibration measurements predict the mechanical properties of human tibia, Clin. Biomech. (Bristol, Avon), vol. 25, no. 4, pp. 365–371, 2010. DOI: 10.1016/j.clinbiomech.2010.01.002.
   PubMed Web of Science ®Google Scholar
• D. Nakashima, K. Ishii, M. Matsumoto, M. Nakamura, and T. Nagura, A study on the use of the Osstell apparatus to evaluate pedicle screw stability: An in-vitro study using micro-CT, PLoS One, vol. 13, no. 6, p. e0199362, 2018. DOI: 10.1371/journal.pone.0199362.
   PubMed Web of Science ®Google Scholar
• N. Meredith, K. Book, B. Friberg, T. Jemt, and L. Sennerby, Resonance frequency measurements of implant stability in vivo. A cross-sectional and longitudinal study of resonance frequency measurements on implants in the edentulous and partially dentate maxilla, Clin. Oral Implants Res., vol. 8, no. 3, pp. 226–233, 1997. DOI: 10.1034/j.1600-0501.1997.080309.x.
   PubMed Web of Science ®Google Scholar
• L. Beltran, V. Ghazikhanian, M. Padron, and J. Beltran, The proximal hamstring muscle–tendon–bone unit: A review of the normal anatomy, biomechanics, and pathophysiology, Eur. J. Radiol., vol. 81, no. 12, pp. 3772–3779, 2012. DOI: 10.1016/j.ejrad.2011.03.099.
   PubMed Web of Science ®Google Scholar
• A.P. Georgiou and J.L. Cunningham, Accurate diagnosis of hip prosthesis loosening using a vibrational technique, Clin. Biomech., vol. 16, no. 4, pp. 315–23, 2001. DOI: 10.1016/s0268-0033(01)00002-x.
   PubMed Web of Science ®Google Scholar
• A. Rowlands, F.A. Duck, and J.L. Cunningham, Bone vibration measurement using ultrasound: Application to detection of hip prosthesis loosening, Med. Eng. Phys., vol. 30, no. 3, pp. 278–84, 2008. DOI: 10.1016/j.medengphy.2007.04.017.
   PubMed Web of Science ®Google Scholar
• P. Henys, L. Capek, J. Fencl, and E. Prochazka, Evaluation of acetabular cup initial fixation by using resonance frequency principle, Proc. Inst. Mech. Eng. H., vol. 229, no. 1, pp. 3–8, 2015. DOI: 10.1177/0954411914561485.
   PubMed Web of Science ®Google Scholar
• M. Lannocca, E. Varini, A. Cappello, L. Cristofolini, and E. Bialoblocka, Intra-operative evaluation of cementless hip implant stability: A prototype device based on vibration analysis, Med. Eng. Phys., vol. 29, no. 8, pp. 886–94, 2007. DOI: 10.1016/j.medengphy.2006.09.011.
   PubMed Web of Science ®Google Scholar
• S.A. Yousefsani, H. Dejnabadi, O. Guyen, and K. Aminian, A vibrational technique for in vitro intraoperative prosthesis fixation monitoring, IEEE Trans. Biomed. Eng., vol. 67, no. 10, pp. 2953–2964, 2020. DOI: 10.1109/TBME.2020.2974380.
   PubMed Web of Science ®Google Scholar
• G.V. der, P.I. Denayer, S.V.N. Jaecques, F. Burny, R. Puers, and A. Borgwardt, Measurement of implant stability and osseointegration: Non-linearities and resonance frequencies. In: Prendergast P.J., Lee T.C., Carr A.J., (eds.), Proc. 12th Conf. Eur. Soc. Biomech., p. 151, 2000.
   Google Scholar
• S.V.N. Jaecques, C. Pastrav, A. Zahariuc, and G. Van Der Perre, Analysis of the fixation quality of cementless hip prostheses using a vibrational technique, pp. 443–456, 2004.
   Google Scholar
• S. Kikuchi, M. Katsuhiro, N. Daisuke, K. Toshiyuki, H. Noboru, N. Masaharu, K. Arihiko, N. Masaya, and N. Takeo, Laser resonance frequency analysis: A novel measurement approach to evaluate acetabular cup stability during surgery, Sensors (Basel), vol. 19, no. 22, pp. 4876, 2019. DOI: 10.3390/s19224876.
   PubMed Web of Science ®Google Scholar
• P. Henyš, et al., Modal frequency and shape curvature as a measure of implant fixation: A computer study on the acetabular cup, Med. Eng. Phys., vol. 60, 2018.
   PubMed Web of Science ®Google Scholar
• P. Henyš and L. Čapek, Material model of pelvic bone based on modal analysis: A study on the composite bone, Biomech. Model Mechanobiol., vol. 16, no. 1, pp. 363–373, 2017. DOI: 10.1007/s10237-016-0822-1.
   PubMed Web of Science ®Google Scholar
• S. Leuridan, et al., Determination of replicate composite bone material properties using modal analysis, J. Mech. Behav. Biomed. Mater., vol. 66, pp. 12–18, 2017. DOI: 10.1016/j.jmbbm.2016.10.018.
   PubMed Web of Science ®Google Scholar
• H.A. Lomami, et al., Ex vivo estimation of cementless femoral stem stability using an instrumented hammer, Clin. Biomech., vol. 76, pp. 105006, 2020.
   PubMed Web of Science ®Google Scholar
• A. Dubory, G. Rosi, A. Tijou, H.A. Lomami, C.-H. Flouzat-Lachaniette, and G. Haïat, A cadaveric validation of a method based on impact analysis to monitor the femoral stem insertion, J. Mech. Behav. Biomed. Mater., vol. 103, pp. 103535, 2020.
   PubMed Web of Science ®Google Scholar
• A. Michel, R. Bosc, J.-P. Meningaud, P. Hernigou, and G. Haiat, Assessing the acetabular cup implant primary stability by impact analyses: A cadaveric study, PLoS One, vol. 11, no. 11, pp. e0166778, 2016. DOI: 10.1371/journal.pone.0166778.
   PubMed Web of Science ®Google Scholar
• A.-S. Poudrel, G. Rosi, V.-H. Nguyen, and G. Haiat, Modal analysis of the ancillary during femoral stem insertion: A study on bone mimicking phantoms, Ann. Biomed. Eng., vol. 50, no. 1, pp. 16–28, 2022. DOI: 10.1007/s10439-021-02887-9.
   PubMed Web of Science ®Google Scholar
• E.G. Nieto, Análisis de micromovilidad en vástagos femorales mediante ensayo dinámico de oscilaciones libres. PhD Thesis, E.T.S.I. Industriales (UPM), 2013. DOI: 10.20868/UPM.thesis.23202.
   Google Scholar
• R. Bieger, A. Ignatius, R. Decking, L. Claes, H. Reichel, and L. Dürselen, Primary stability and strain distribution of cementless hip stems as a function of implant design, Clin. Biomech. (Bristol, Avon), vol. 27, no. 2, pp. 158–164, 2012. DOI: 10.1016/j.clinbiomech.2011.08.004.
   PubMed Web of Science ®Google Scholar
• D.J. Inman, Engineering Vibration, 4th ed. Pearson Education, Upper Saddle River, 2008.
   Google Scholar
• A. Arami, J.-R. Delaloye, H. Rouhani, B.M. Jolles, and K. Aminian, Knee implant loosening detection: A vibration analysis investigation, Ann. Biomed. Eng., vol. 46, no. 1, pp. 97–107, 2018. DOI: 10.1007/s10439-017-1941-2.
   PubMed Web of Science ®Google Scholar
• J.S. Rieger, S. Jaeger, J.P. Kretzer, R. Rupp, and R.G. Bitsch, Loosening detection of the femoral component of hip prostheses with extracorporeal shockwaves: A pilot study, Med. Eng. Phys., vol. 37, no. 2, pp. 157–164, 2015. DOI: 10.1016/j.medengphy.2014.11.011.
   PubMed Web of Science ®Google Scholar
• G. Qi, W.P. Mouchon, and T.E. Tan, How much can a vibrational diagnostic tool reveal in total hip arthroplasty loosening? Clin. Biomech., vol. 18, no. 5, pp. 444–58, 2003. DOI: 10.1016/s0268-0033(03)00051-2.
   PubMed Web of Science ®Google Scholar
• A.A. Alshuhri, Non-invasive diagnostic techniques for the detection of acetabular component loosening in total hip replacement, PhD Thesis, 2016. https://researchportal.bath.ac.uk/files/187949074/AAALSHUHRI_PhDThesis.pdf.
   Google Scholar
• W.H. Ong, W.K. Chiu, M. Russ, and Z.K. Chiu, Extending structural health monitoring concepts for bone healing assessment, Fatigue Fract. Eng. Mater Struct., vol. 39, no. 4, pp. 491–501, 2016. DOI: 10.1111/ffe.12382.
   Web of Science ®Google Scholar