Thermal fatigue failure enhancement for FGM coolant pipes subject to high-temperature and hydrostatic lateral pressure

References

• K.S. Kang, and L. Kupca, Assessment and Management of Aging of Major Nuclear Power Plant Components Important to Safety, International Atomic Energy Agency (IAEA), Vienna International Centre, Vienna, Austria, 2011.
   Google Scholar
• C. Faidy, S. Chapuliot, and E. Mathet, Thermal fatigue of reactor components in OECD-NEA member countries: a three-fold program to enhance cooperation, International Conference on Structural Mechanics in Reactor Technology, China, 2005.
   Google Scholar
• E. Paffumi, K.F. Nilsson, and N.G. Taylor, Simulation of thermal fatigue damage in a 316L model pipe component, Int. J. Press. Vessels Pip., vol. 85, no. 11, pp. 798–813, 2008. DOI: 10.1016/j.ijpvp.2008.06.002.
   Web of Science ®Google Scholar
• R.G. Ballinger, The development and production of a functionally graded composite for Pb-Bi service, U.S. Department of Energy Office of Scientific and Technical Information (Technical Report DOE-ID1 4742), 2011.
   Google Scholar
• R.G. Ballinger, Materials testing and development of functionally graded composite fuel cladding and piping for the lead-bismuth cooled nuclear reactor, Master’s thesis, Massachusetts Institute of Technology, Massachusetts, 2013.
   Google Scholar
• Magdalena Serrano De Caro, Keith A. Woloshun, Floren V. Rubio, and Stuart A. Maloy, Materials Selection for the Lead-Bismuth Corrosion and Erosion Tests in Delta Loop, U.S. Department of Energy Office of Scientific and Technical Information, United States, 2013.
   Google Scholar
• L. Jeongyoun, Effects of Chromium and silicon on corrosion of iron alloys in lead-bismuth eutectic, Ph.D. thesis, Massachusetts Institute of Technology, Massachusetts, 2006.
   Google Scholar
• Wenxuan Xi, Yongwei Wang, Xunfeng Li, Xiulan Huai, and Jun Cai, Experimental investigation of the thermal hydraulics in lead bismuth eutectic-helium experimental loop of an accelerator-driven system, Nucl. Eng. Technol., vol. 48, no. 5, pp. 1154–1161, 2016. DOI: 10.1016/j.net.2016.04.008.
   Web of Science ®Google Scholar
• W. Hao, X. Jun, and W. Hui, Corrosion behavior and surface treatment of cladding materials used in high-temperature lead-bismuth eutectic alloy: a review, Coatings., vol. 11, no. 3, p. 364. 2021. DOI: 10.3390/coatings11030364.
   Web of Science ®Google Scholar
• A. Kwangwon, J. Kyohun, and P.P. Sung, Safety evaluation of silicon carbide and zircaloy-4 cladding during a large-break loss-of coolant accident, Energies, vol. 11, no. 12, p. 3324, 2018. DOI: 10.3390/en11123324.
   Web of Science ®Google Scholar
• W.L. Ting, Risk-informed safety margin characterization for a larger break loss-of-coolant accident of nuclear power plants and associated peak cladding temperature margin evolution, Master Thesis, University of Liverpool, Liverpool, 2019.
   Google Scholar
• S. Masahide, M. Kenta, and S. Takashi, Verification of safety margin of reactor pressure vessel exposed to various thermal transients based on probabilistic approach, E-J. Adv. Maint., vol. 11, no. 4, pp. 172–178, 2020.
   Google Scholar
• V.R. Vincenzo, and W. Thierry, The high burn-up structure in nuclear fuel, Mater. Today, vol. 13, no. 12, pp. 24–32, 2010.
   Web of Science ®Google Scholar
• M.P. Short, R.G. Ballinger, and H.E. Hanninen, Corrosion resistance of alloys F91 and Fe-12Cr-2Si in lead-bismuth eutectic up to 715 °C, J. Nucl. Mater., vol. 434, no. 1–3, pp. 259–281, 2013. DOI: 10.1016/j.jnucmat.2012.11.010.
   Web of Science ®Google Scholar
• Z. Huihua, L. Simin, and H. Shangyu, The numerical manifold method for transient moisture diffusion in 2D functionally graded materials, IOP Conf. Ser.: Earth Environ. Sci., vol. 189, no. 3, p. 032017, 2018. DOI: 10.1088/1755-1315/189/3/032017.
   Google Scholar
• H. Zhang, S. Liu, and S. Han, Modelling steady moisture diffusion in functionally graded materials with the numerical manifold method, IOP Conf. Ser.: Earth Environ. Sci., vol. 189, no. 4, p. 042018, 2018. DOI: 10.1088/1755-1315/189/4/.
   Google Scholar
• K. Koutoati, F. Mohri, and E.M. Daya, Finite element approach of axial bending coupling on static and vibration behaviors of functionally graded material sandwich beams, Mech. Adv. Mater. Struct., vol. 28, no. 15, pp. 1537–1553, 2021. DOI: 10.1080/15376494.2019.1685144.
   Web of Science ®Google Scholar
• J.R. Cho, and D.Y. Ha, Averaging and finite element discretization approaches in the numerical analysis of functionally graded materials, Mater. Sci. Eng.: A, vol. 302, no. 2, pp. 187–196, 2001. DOI: 10.1016/S0921-5093(00)01835-9.
   Web of Science ®Google Scholar
• H.L. Dai, and H.J. Jiang, Magnetothermoelastic bending analysis of a functionally graded material cylindrical shell, Mech. Adv. Mater. Struct., vol. 22, no. 4, pp. 281–289, 2015. DOI: 10.1080/15376494.2012.736057.
   Web of Science ®Google Scholar
• K.C. Lo, and H.Y. Lai, Corrosion enhancement for FGM coolant pipes subjected to high-temperature and hydrostatic pressure, Coatings, vol. 12, no. 5, p. 666, 2022. DOI: 10.3390/coatings12050666.
   Web of Science ®Google Scholar
• M.D. Demirbaş, R. Ekici, and M.K. Apalak, Thermoelastic analysis of temperature-dependent functionally graded rectangular plates using finite element and finite difference methods, Mech. Adv. Mater. Struct., vol. 27, no. 9, pp. 707–724, 2020. DOI: 10.1080/15376494.2018.1494871.
   Web of Science ®Google Scholar
• K.P. Verma, and D.K. Maiti, Geometric nonlinear transient analysis of mechanically and thermally shocked functionally graded shell panels, Mech. Adv. Mater. Struct., pp. 1–21, 2022. DOI: 10.1080/15376494.2022.2119314.
   Web of Science ®Google Scholar
• B. Zhou, The effect of the pre-existing surface crack morphologies on the thermal fracture of ceramic coatings, Ph.D. thesis, Purdue University, Indiana, 2003.
   Google Scholar
• M.P. Short, S. McAlpine, M. Tonks, A. Rezwan, J. Zhang, A. Leong, Y. Xie, J. Rausch, J. Salkin, M. Bachav, U. Ehrnstén, S. Penttilä, S. Peltonen, P. Nevasmaa, R. Pohja, H. Hänninen, T. Sarikka, and R. Qiang, NEUP Final Report: Multilayer Composite Fuel Cladding and Core Internals for LWR Performance Enhancement and Severe Accident Tolerance, Massachusetts Institute of Technology, Cambridge, MA, 2019. DOI: 10.2172/1572872.
   Google Scholar
• S. Raju, T. Haraprasanna, and K.R. Arun, Thermal expansion characteristics of Fe-9Cr-0.12C-0.56Mn-0.24V-1.38W-0.06Ta (wt.%) reduced activation ferritic-martensitic steel, J. Nucl. Mater., vol. 459, pp. 150–158, 2015.
   Web of Science ®Google Scholar
• T. Wan, T. Naoe, H. Kogawa, M. Futakawa, H. Obayashi, and T. Sasa, Numerical study on the potential of cavitation damage in a lead-bismuth eutectic spallation target, Materials, vol. 12, no. 4, pp. 681, 2019.
   PubMed Web of Science ®Google Scholar
• P. Hosemann, S. Kabra, E. Stergar, M.J. Cappillo, and S.A. Maloy, Micro-structural characterization of laboratory heats of the Ferric/Martensitic steels HT-9 and T91, J. Nucl. Mater., vol. 403, no. 1–3, pp. 7–14, 2010.
   Web of Science ®Google Scholar
• J. Wang, Study of microstructure evolution in F/M steel T91 by in-situ synchrotron wide-angle X-rays scattering, Master Thesis, University of Illinois, Illinois, 2017.
   Google Scholar
• G. Tibba, Modeling the inelastic behavior of heat exchangers accounting for fluid-structure interactions, Ph.D. thesis, Otto von Guericke University, German, 2013.
   Google Scholar
• J. Zhang, C. Su, and Y. Liu, First-principles study of bcc Fe-Cr-Si binary and ternary random alloys from special quasi-random structure, Physica B, vol. 586, p. 412085, 2020. DOI: 10.1016/j.physb.2020.
   Web of Science ®Google Scholar
• S.O. Yilmaz, Wear behavior of gas tungsten arc deposited FeCrC, FeCrSi, and WCo coatings on AISI 1018 steel, Surf. Coat. Technol., vol. 194, no. 2–3, pp. 175–183, 2005.
   Web of Science ®Google Scholar
• Y.C. Zhou, and T. Hashida, Thermal fatigue failure induced by delamination in thermal barrier coating, Int. J. Fatigue, vol. 24, no. 2–4, pp. 407–417, 2002. DOI: 10.1016/S0142-1123(01)00096-2.
   Web of Science ®Google Scholar
• M. Joonho, K. Sungyu, and D.P. Won, Initial oxidation behavior of Fe-Cr-Si alloys in 1200 °C steam, J. Nucl. Mater., vol. 513, pp. 297–308, 2019.
   Web of Science ®Google Scholar
• Bingsheng Li, Qing Liao, Hongpeng Zhang, Tielong Shen, Fangfang Ge, and Nabil Daghbouj, The effects of stress on corrosion behavior of SIMP martensitic steel in static liquid lead-bismuth eutectic, Corros. Sci., vol. 187, p. 109477, 2021. DOI: 10.1016/j.corsci.2021.
   Web of Science ®Google Scholar
• W. Tao, and S. Shigeru, Flow-accelerated corrosion of type 316L stainless steel caused by turbulent lead-bismuth eutectic flow, Metals, vol. 8, no. 8, p. 627, 2018. DOI: 10.3390/met8080627.
   Web of Science ®Google Scholar
• J. Postlethwaite, and S. Nesic, Hydrodynamics of disturbed flow and erosion-corrosion. Part I—Single-phase flow study, Can. J. Chem. Eng., vol. 69, no. 3, pp. 698–703, 1991. DOI: 10.1002/cjce.5450690311.
   Web of Science ®Google Scholar
• I. Tamura, Y. Tomota, and H. Ozawa, Strength and ductility of Fe–Ni–C alloys composed of austenite and martensite with various strength, Cambridge Inst. Met., vol. 1, no. 1973, pp. 611–615, 1973.
   Google Scholar
• Y.J. Woo, and C.H. Sung, Analysis of functionally graded material plates using sigmoidal law, Math. Prob. Eng., vol. 4, no. 8, pp. 1–12, 2017.
   Google Scholar
• B. Vasavi, G. Raghavendra, and O. Shakuntla, State of the art in functionally graded materials, Compos. Struct., vol. 262, p. 113596, 2021.
   Web of Science ®Google Scholar
• S. Faruqui, A. Arabi, and M. Parvel, Thermal resistance approach to analyze temperature distribution in hollow cylinders made of functionally graded material (FGM): under Dirichlet boundary condition. Third International Conference on Mechanical Industrial and Materials Engineering, Rajshahi University of Engineering & Technology, Bengal, 2017.
   Google Scholar
• M.A. Samel, Kinetics of Materials, John Wiley & Sons, Hoboken, NJ, 2005.
   Google Scholar
• D. Wenyi, J. Zhizhong, and X. Jingping, Interactions between alloy elements and oxygen at the steel-liquid LBE interface determined from first-principles molecular dynamics simulations, Phys. Chem. Chem. Phys., vol. 21, pp. 25521–25926, 2019. DOI: 10.1039/c9cp05626b.
   Web of Science ®Google Scholar
• Klod Kokini, Jeffery DeJonge, Sudarshan Rangaraj, and Brad Beardsley, Thermal shock of functionally graded thermal barrier coatings with similar thermal resistance, Surf. Coat. Technol., vol. 154, no. 2–3, pp. 223–231, 2002. DOI: 10.1016/S0257-8972(02)00031-2.
   Web of Science ®Google Scholar
• Ji Li, Xikou He, Bin Xu, Zhengxin Tang, Caishun Fang, and Gang Yang, Effect of silicon on dynamic/static corrosion resistance of T91 in lead–bismuth eutectic at 550 °C, Materials, vol. 15, no. 8, p. 2862, 2022. DOI: 10.3390/ma15082862.
   PubMed Web of Science ®Google Scholar