Dynamic responses of functionally graded origami-enabled auxetic metamaterial sector plate induced by mechanical shock: Application of innovative machine learning algorithm

References

• K. Bertoldi, V. Vitelli, J. Christensen, and M. Van Hecke, Flexible mechanical metamaterials, Nat. Rev. Mater., vol. 2, no. 11, pp. 1–11, 2017. DOI: 10.1038/natrevmats.2017.66.
   Web of Science ®Google Scholar
• L. Ai, and X.-L. Gao, Metamaterials with negative Poisson’s ratio and non-positive thermal expansion, Compos. Struct., vol. 162, pp. 70–84, 2017. DOI: 10.1016/j.compstruct.2016.11.056.
   Web of Science ®Google Scholar
• Y. Chen, and Z.-W. Wang, In-plane elasticity of the re-entrant auxetic hexagonal honeycomb with hollow-circle joint, Aerosp. Sci. Technol., vol. 123, pp. 107432, 2022. DOI: 10.1016/j.ast.2022.107432.
   Web of Science ®Google Scholar
• Y. Chen, T. Li, F. Scarpa, and L. Wang, Lattice metamaterials with mechanically tunable Poisson’s ratio for vibration control, Phys. Rev. Applied., vol. 7, no. 2, pp. 024012, 2017. DOI: 10.1103/PhysRevApplied.7.024012.
   Web of Science ®Google Scholar
• H. Ebrahimi, D. Mousanezhad, H. Nayeb-Hashemi, J. Norato, and A. Vaziri, 3D cellular metamaterials with planar anti-chiral topology, Materials Design., vol. 145, pp. 226–231, 2018. DOI: 10.1016/j.matdes.2018.02.052.
   Web of Science ®Google Scholar
• Y. Hou, Y. Tai, C. Lira, F. Scarpa, J.R. Yates, and B. Gu, The bending and failure of sandwich structures with auxetic gradient cellular cores, Compos. Part A: Appl. Sci. Manuf., vol. 49, pp. 119–131, 2013. DOI: 10.1016/j.compositesa.2013.02.007.
   Web of Science ®Google Scholar
• X. Jin, Z. Wang, J. Ning, G. Xiao, E. Liu, and X. Shu, Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading, Compos. Part B: Eng., vol. 106, pp. 206–217, 2016. DOI: 10.1016/j.compositesb.2016.09.037.
   Web of Science ®Google Scholar
• M. Schenk, and S.D. Guest, Geometry of Miura-folded metamaterials, Proc. Natl. Acad. Sci. USA., vol. 110, no. 9, pp. 3276–3281, 2013. DOI: 10.1073/pnas.1217998110.
   PubMed Web of Science ®Google Scholar
• S. Zhao, Y. Zhang, Y. Zhang, J. Yang, and S. Kitipornchai, Graphene origami-enabled auxetic metallic metamaterials: an atomistic insight, Int. J. Mech. Sci., vol. 212, pp. 106814, 2021. DOI: 10.1016/j.ijmecsci.2021.106814.
   Web of Science ®Google Scholar
• S. Zhao, Z. Zhao, Z. Yang, L. Ke, S. Kitipornchai, and J. Yang, Functionally graded graphene reinforced composite structures: a review, Eng. Struct., vol. 210, pp. 110339, 2020. DOI: 10.1016/j.engstruct.2020.110339.
   Web of Science ®Google Scholar
• K. Chu, and C. Jia, Enhanced strength in bulk graphene–copper composites, Physica Status Solidi (a)., vol. 211, no. 1, pp. 184–190, 2014. DOI: 10.1002/pssa.201330051.
   Web of Science ®Google Scholar
• S. Zhao, Y. Zhang, Y. Zhang, W. Zhang, J. Yang, and S. Kitipornchai, Genetic programming-assisted micromechanical models of graphene origami-enabled metal metamaterials, Acta Mater., vol. 228, pp. 117791, 2022. DOI: 10.1016/j.actamat.2022.117791.
   Web of Science ®Google Scholar
• M.R. Barati, and A.M. Zenkour, Analysis of postbuckling of graded porous GPL-reinforced beams with geometrical imperfection, Mech. Adv. Mater. Struct., vol. 26, no. 6, pp. 503–511, 2019a. DOI: 10.1080/15376494.2017.1400622.
   Web of Science ®Google Scholar
• H.H. Patil, J. Pitchaimani, and M. Eltaher, Buckling and vibration of beams using Ritz method: effects of axial grading of GPL and axially varying load, Mech. Adv. Mater. Struct., pp. 1–14, 2023. DOI: 10.1080/15376494.2023.2185711.
   Web of Science ®Google Scholar
• H. Salehipour, M.A. Shahmohammadi, P.D. Folkow, and O. Civalek, An analytical solution for vibration response of CNT/GPL/fibre/polymer hybrid composite micro/nanoplates, Mech. Adv. Mater. Struct., pp. 1–21, 2022. DOI: 10.1080/15376494.2022.2150916.
   Google Scholar
• E. Arshid, M.A. Ghorbani, M.J. Momeni Nia, Ö. Civalek, and A. Kumar, Thermo-elastic buckling behaviors of advanced fluid-infiltrated porous shells integrated with GPLs-reinforced nanocomposite patches, Mech. Adv. Mater. Struct., pp. 1–17, 2023. DOI: 10.1080/15376494.2023.2251015.
   Web of Science ®Google Scholar
• M.H. Ghadiri Rad, and S.M. Hosseini, Application of the CUF–EFG method for buckling analysis of the multilayer GPLs–CNTs-reinforced FG plates with cutout, Mech. Adv. Mater. Struct., pp. 1–17, 2022. DOI: 10.1080/15376494.2022.2116664.
   Web of Science ®Google Scholar
• T.Y. Zhao, Y.S. Cui, Y.Q. Wang, and H.G. Pan, Vibration characteristics of graphene nanoplatelet reinforced disk-shaft rotor with eccentric mass, Mech. Adv. Mater. Struct., vol. 29, no. 24, pp. 3485–3498, 2022. DOI: 10.1080/15376494.2021.1904525.
   Web of Science ®Google Scholar
• M.R. Barati, and A.M. Zenkour, Vibration analysis of functionally graded graphene platelet reinforced cylindrical shells with different porosity distributions, Mech. Adv. Mater. Struct., vol. 26, no. 18, pp. 1580–1588, 2019b. DOI: 10.1080/15376494.2018.1444235.
   Web of Science ®Google Scholar
• A. El Jery, M. Al-Bahrani, S. Rahim Alatba, and M. Fraga, Simultaneous effect of thermal shock and prebuckling loads on the exact coupled thermoelasticity response of the nanocomposite-reinforced sandwich sector system, Mech. Adv. Mater. Struct., pp. 1–19, 2023. DOI: 10.1080/15376494.2022.2162642.
   Web of Science ®Google Scholar
• M. Haboussi, A. Sankar, and M. Ganapathi, Nonlinear axisymmetric dynamic buckling of functionally graded graphene reinforced porous nanocomposite spherical caps, Mech. Adv. Mater. Struct., vol. 28, no. 2, pp. 127–140, 2021. DOI: 10.1080/15376494.2018.1549296.
   Web of Science ®Google Scholar
• X. Chen, H.-S. Shen, and C. Li, Reexamination for linear and nonlinear free vibration of porous sandwich cylindrical shells reinforced by graphene platelets, Mech. Adv. Mater. Struct., pp. 1–14, 2023. DOI: 10.1080/15376494.2023.2206821.
   Web of Science ®Google Scholar
• Y. Xiao, Z. Wu, X. Zhang, C. Zhang, and R. Xiaohui, A strategy improving stiffness to resist local vibration of sandwich plates by extended Legendre higher-order model, Mech. Adv. Mater. Struct., pp. 1–18, 2023. DOI: 10.1080/15376494.2022.2163729.
   Web of Science ®Google Scholar
• H. Hirane, M.-O. Belarbi, M.S.A. Houari, and A. Tounsi, On the layerwise finite element formulation for static and free vibration analysis of functionally graded sandwich plates, Eng. Comput., vol. 38, no. S5, pp. 3871–3899, 2022. DOI: 10.1007/s00366-020-01250-1.
   Google Scholar
• E. Daneshkhah, E. Carrera, X. Xu, and H. Yang, The effects of surroundings and stiffeners in the CUF-based postbuckling analysis of composite panels under in-plane shear, Mech. Adv. Mater. Struct., vol. 30, no. 16, pp. 3267–3279, 2023. DOI: 10.1080/15376494.2022.2072983.
   Web of Science ®Google Scholar
• A. Pagani, R. Augello, and E. Carrera, Numerical simulation of deployable ultra-thin composite shell structures for space applications and comparison with experiments, Mech. Adv. Mater. Struct., vol. 30, no. 8, pp. 1591–1603, 2023. DOI: 10.1080/15376494.2022.2037173.
   Web of Science ®Google Scholar
• S. Saputo, M. Petrolo, A. Pagani, and E. Carrera, 2023. High-Fidelity Stress Fields in Contact Problems using Beam, Plates, and Shells Layer-Wise Models, Presented at the Book of Abstracts of the VII International Conference on Computational Contact Mechanics, ICCCM 2023, ECCOMAS.
   Google Scholar
• J. Shen, M.T. Arruda, A. Pagani, and E. Carrera, A regularized higher-order beam elements for damage analysis of reinforced concrete beams, Mech. Adv. Mater. Struct., pp. 1–13, 2023. DOI: 10.1080/15376494.2023.2245825.
   Google Scholar
• M. Amini, M. Soleimani, A. Altafi, and A. Rastgoo, Effects of geometric nonlinearity on free and forced vibration analysis of moderately thick annular functionally graded plate, Mech. Adv. Mater. Struct., vol. 20, no. 9, pp. 709–720, 2013. DOI: 10.1080/15376494.2012.676711.
   Web of Science ®Google Scholar
• H. Li, P. Xue, T. Zhang, and B. Wen, Nonlinear vibration study of fiber-reinforced composite thin plate with strain-dependent property based on strain energy density function method, Mech. Adv. Mater. Struct., vol. 27, no. 9, pp. 761–773, 2020. DOI: 10.1080/15376494.2018.1495792.
   Web of Science ®Google Scholar
• T.Q. Quan, V.M. Anh, V. Mahesh, and N.D. Duc, Vibration and nonlinear dynamic response of imperfect sandwich piezoelectric auxetic plate, Mech. Adv. Mater. Struct., vol. 29, no. 1, pp. 127–137, 2022. DOI: 10.1080/15376494.2020.1752864.
   Web of Science ®Google Scholar
• X. Shi, D. Shi, W.L. Li, and Q. Wang, A unified method for free vibration analysis of circular, annular and sector plates with arbitrary boundary conditions, J. Vib. Control., vol. 22, no. 2, pp. 442–456, 2016. DOI: 10.1177/1077546314533580.
   Web of Science ®Google Scholar
• K. Liew, and F.-L. Liu, Differential quadrature method for vibration analysis of shear deformable annular sector plates, J. Sound Vib., vol. 230, no. 2, pp. 335–356, 2000. DOI: 10.1006/jsvi.1999.2623.
   Web of Science ®Google Scholar
• M. Babaei, K. Asemi, and F. Kiarasi, Static response and free-vibration analysis of a functionally graded annular elliptical sector plate made of saturated porous material based on 3D finite element method, Mech. Based Des. Struct. Mach., vol. 51, no. 3, pp. 1272–1296, 2023. DOI: 10.1080/15397734.2020.1864401.
   Google Scholar
• P.A. Demirhan, and V. Taskin, Bending and free vibration analysis of Levy-type porous functionally graded plate using state space approach, Compos. Part B: Eng., vol. 160, pp. 661–676, 2019. DOI: 10.1016/j.compositesb.2018.12.020.
   Web of Science ®Google Scholar
• N.K. Guru, and S.K. Jain, Free axisymmetric vibrations of composite annular sandwich plates by higher-order theory using Chebyshev collocation technique, Thin. Walled Struct., vol. 155, pp. 106823, 2020. DOI: 10.1016/j.tws.2020.106823.
   Web of Science ®Google Scholar
• X. He, J. Ding, M. Habibi, H. Safarpour, and M. Safarpour, Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate, Thin. Walled Struct., vol. 166, pp. 108019, 2021. DOI: 10.1016/j.tws.2021.108019.
   Web of Science ®Google Scholar
• A.M. Qolipour, H. Eipakchi, and F.M. Nasrekani, Asymmetric/Axisymmetric buckling of circular/annular plates under radial load using first-order shear deformation theory, Thin. Walled Struct., vol. 182, pp. 110244, 2023. DOI: 10.1016/j.tws.2022.110244.
   Web of Science ®Google Scholar
• M. Jahanmardi, H. Hosseini-Toudeshky, M.S. Goodarzi, E. Carrera, and A. Pagani, Modified hyper-viscoelastic damage evolution constitutive model for polyurethane materials–an experimental and numerical investigation, Mech. Adv. Mater. Struct., pp. 1–12, 2023. DOI: 10.1080/15376494.2023.2182006.
   Web of Science ®Google Scholar
• Y. Wu, J. Chen, L. Zhang, J. Ji, Q. Wang, and S. Zhang, Effect of boron on the structural stability, mechanical properties, and electronic structures of γ′-Ni3Al in TLP joints of nickel-based single-crystal alloys, Mater. Today Commun., vol. 31, pp. 103375, 2022. DOI: 10.1016/j.mtcomm.2022.103375.
   Google Scholar
• D. Wang, X. Wang, M.L. Jin, P. He, and S. Zhang, Molecular level manipulation of charge density for solid-liquid TENG system by proton irradiation, Nano Energy, vol. 103, pp. 107819, 2022. DOI: 10.1016/j.nanoen.2022.107819.
   Web of Science ®Google Scholar
• J. Li, M. Chen, and Z. Li, Improved soil–structure interaction model considering time-lag effect, Comput. Geotech., vol. 148, pp. 104835, 2022. DOI: 10.1016/j.compgeo.2022.104835.
   Web of Science ®Google Scholar
• X. Bai, H. Shi, K. Zhang, X. Zhang, and Y. Wu, Effect of the fit clearance between ceramic outer ring and steel pedestal on the sound radiation of full ceramic ball bearing system, J. Sound Vib., vol. 529, pp. 116967, 2022. DOI: 10.1016/j.jsv.2022.116967.
   Web of Science ®Google Scholar
• X. Zhang, Y. Tang, F. Zhang, and C. Lee, A Novel Aluminum-Graphite Dual-Ion Battery, Adv. Energy Mater., vol. 6, no. 11, pp. 1502588, 2016. DOI: 10.1002/aenm.201502588.
   Web of Science ®Google Scholar
• D. Liao, S. Zhu, B. Keshtegar, G. Qian, and Q. Wang, Probabilistic framework for fatigue life assessment of notched components under size effects, Int. J. Mech. Sci., vol. 181, pp. 105685, 2020. DOI: 10.1016/j.ijmecsci.2020.105685.
   Web of Science ®Google Scholar
• X. Niu, et al., Defect tolerant fatigue assessment of AM materials: Size effect and probabilistic prospects, Int. J. Fatigue, vol. 160, pp. 106884, 2022. DOI: 10.1016/j.ijfatigue.2022.106884.
   Web of Science ®Google Scholar
• Zhiyuan Zhang, et al., Effects of solder thickness on interface behavior and nanoindentation characteristics in Cu/Sn/Cu microbumps, Weld. World, vol. 66, no. 5, pp. 973–983, 2022. DOI: 10.1007/s40194-022-01261-0.
   Web of Science ®Google Scholar
• K. Guo, G. Gou, H. Lv, and M. Shan, Jointing of CFRP/5083 aluminum alloy by induction brazing: Processing, connecting mechanism, and fatigue performance, Coatings, vol. 12, no. 10, pp. 1559, 2022. DOI: 10.3390/coatings12101559.
   Web of Science ®Google Scholar
• Z.H. Fu, et al., Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones, Corros. Sci., vol. 164, pp. 108337, 2020. DOI: 10.1016/j.corsci.2019.108337.
   Web of Science ®Google Scholar
• Z.Y. Zhu, Y.L. Liu, G.Q. Gou, W. Gao, and J. Chen, Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser + CMT, Sci Rep., vol. 11, no. 1, pp. 10020, 2021. DOI: 10.1038/s41598-021-89343-9.
   PubMed Web of Science ®Google Scholar
• Q. Zhu, J. Chen, G. Gou, H. Chen, and P. Li, Ameliorated longitudinal critically refracted—Attenuation velocity method for welding residual stress measurement, J. Mater. Process. Technol., vol. 246, pp. 267–275, 2017. DOI: 10.1016/j.jmatprotec.2017.03.022.
   Web of Science ®Google Scholar
• L. Tian, M. Li, L. Li, D. Li, and C. Bai, Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios, Thin. Walled Struct., vol. 182, pp. 110219, 2023. DOI: 10.1016/j.tws.2022.110219.
   Web of Science ®Google Scholar
• L. Tian, B. Jin, and L. Li, Axial compressive mechanical behaviors of a double-layer member, J. Struct. Eng., vol. 149, no. 8, pp. 4023110, 2023. DOI: 10.1061/JSENDH.STENG-12175.
   Web of Science ®Google Scholar
• Haotian Yu, et al., Bio-inspired strip-shaped composite composed of glass fabric and waste selvedge from A. pernyi silk for lightweight and high-impact applications, Compos. A Appl. Sci. Manuf., vol. 174, pp. 107715, 2023. DOI: 10.1016/j.compositesa.2023.107715.
   Web of Science ®Google Scholar
• X. Xu, Y. Sun, X. Tian, L. Zhou, and Y. Li, A novel orientation determination approach of mobile robot using inertial and magnetic sensors, IEEE Trans. Ind. Electron., vol. 70, no. 4, pp. 4267–4277, 2023. DOI: 10.1109/TIE.2022.3177762.
   Web of Science ®Google Scholar
• J. Shi, B. Zhao, T. He, L. Tu, X. Lu, and H. Xu, Tribology and dynamic characteristics of textured journal-thrust coupled bearing considering thermal and pressure coupled effects, Tribol. Int., vol. 180, pp. 108292, 2023. DOI: 10.1016/j.triboint.2023.108292.
   Web of Science ®Google Scholar
• Z. Wu, B. Huang, J. Fan, and H. Chen, Homotopy based stochastic finite element model updating with correlated static measurement data, Measurement, vol. 210, pp. 112512, 2023. DOI: 10.1016/j.measurement.2023.112512.
   Web of Science ®Google Scholar
• X. Bai, Y. He, and M. Xu, Low-thrust reconfiguration strategy and optimization for formation flying using Jordan normal form, IEEE Trans. Aerosp. Electron. Syst., vol. 57, no. 5, pp. 3279–3295, 2021. DOI: 10.1109/TAES.2021.3074204.
   Web of Science ®Google Scholar
• Kang Yang, et al., Correlating multi-scale structure characteristics to mechanical behavior of Caprinae horn sheaths, J. Mater. Res. Technol., vol. 21, pp. 2191–2202, 2022. DOI: 10.1016/j.jmrt.2022.10.044.
   Google Scholar
• Yegang Lu, et al., Mixed-mode operation of hybrid phase-change nanophotonic circuits, Nano Lett., vol. 17, no. 1, pp. 150–155, 2017. DOI: 10.1021/acs.nanolett.6b03688.
   PubMed Web of Science ®Google Scholar
• Yimin Chen, et al., Unraveling the crystallization kinetics of supercooled liquid GeTe by ultrafast calorimetry, Crystal Growth Des., vol. 17, no. 7, pp. 3687–3693, 2017. DOI: 10.1021/acs.cgd.7b00259.
   Web of Science ®Google Scholar
• P. Wang, X. Wu, and X. He, Vibration-theoretic approach to vulnerability analysis of nonlinear vehicle platoons, IEEE Trans. Intell. Transport. Syst., vol. 24, no. 10, pp. 11334–11344, 2023. DOI: 10.1109/TITS.2023.3278574.
   Web of Science ®Google Scholar
• C. Luo, L. Wang, Y. Xie, and B. Chen, A new conjugate gradient method for moving force identification of vehicle–bridge system, J. Vib. Eng. Technol., 2022. DOI: 10.1007/s42417-022-00824-1.
   Web of Science ®Google Scholar
• Hehe Zhang, et al., Effects of Ni-decorated reduced graphene oxide nanosheets on the microstructural evolution and mechanical properties of Sn-3.0Ag-0.5Cu composite solders, Intermetallics., vol. 150, pp. 107683, 2022. DOI: 10.1016/j.intermet.2022.107683.
   Web of Science ®Google Scholar
• H.Q. Yang, Z. Li, T.Q. Jie, and Z.Q. Zhang, Effects of joints on the cutting behavior of disc cutter running on the jointed rock mass, Tunnelling Underground Space Technol., vol. 81, pp. 112–120, 2018. DOI: 10.1016/j.tust.2018.07.023.
   Web of Science ®Google Scholar
• Bolong Liu, Haiqing Yang, and Shivakumar Karekal, Effect of water content on argillization of mudstone during the tunnelling process, Rock Mech Rock Eng., vol. 53, no. 2, pp. 799–813, 2020. DOI: 10.1007/s00603-019-01947-w.
   Web of Science ®Google Scholar
• H.Q. Yang, C.W. Chen, J.H. Ni, and S. Karekal, A hyperspectral evaluation approach for quantifying salt-induced weathering of sandstone, Sci Total Environ., vol. 885, pp. 163886, 2023. DOI: 10.1016/j.scitotenv.2023.163886.
   PubMed Web of Science ®Google Scholar
• Haiqing Yang, Zhihui Wang, and Kanglei Song, A new hybrid grey wolf optimizer-feature weighted-multiple kernel-support vector regression technique to predict TBM performance, Eng. Comp., vol. 38, no. 3, pp. 2469–2485, 2022. DOI: 10.1007/s00366-020-01217-2.
   Google Scholar
• H. Yang, K. Song, and J. Zhou, Automated recognition model of geomechanical information based on operational data of tunneling boring machines, Rock Mech Rock Eng., vol. 55, no. 3, pp. 1499–1516, 2022. DOI: 10.1007/s00603-021-02723-5.
   Web of Science ®Google Scholar
• L. Chen, H. Yang, K. Song, et al., Failure mechanisms and characteristics of the Zhongbao landslide at Liujing Village, Wulong, China, Landslides., vol. 18, no. 4, pp. 1445–1457, 2021. DOI: 10.1007/s10346-020-01594-1.
   Web of Science ®Google Scholar
• H.Q. Yang, S.G. Xing, Q. Wang, and Z. Li, Model test on the entrainment phenomenon and energy conversion mechanism of flow-like landslides, Eng. Geol., vol. 239, pp. 119–125, 2018. DOI: 10.1016/j.enggeo.2018.03.023.
   Web of Science ®Google Scholar
• H.Q. Yang, Y.Y. Zeng, Y.F. Lan, and X.P. Zhou, Analysis of the excavation damaged zone around a tunnel accounting for geostress and unloading, Int. J. Rock Mech. Mining Sci., vol. 69, pp. 59–66, 2014. DOI: 10.1016/j.ijrmms.2014.03.003.
   Web of Science ®Google Scholar
• S. Han, Z. Zhu, M. Mortazavi, A.M. El-Sherbeeny, and P. Mehrabi, Analytical assessment of the structural behavior of a specific composite floor system at elevated temperatures using a newly developed hybrid intelligence method, Buildings, vol. 13, no. 3, pp. 799, 2023. DOI: 10.3390/buildings13030799.
   Web of Science ®Google Scholar
• Jie Wu, Yong Yang, Peyman Mehrabi, and Emad Abouel Nasr, Efficient machine-learning algorithm applied to predict the transient shock reaction of the elastic structure partially rested on the viscoelastic substrate, Mech. Adv. Mater. Struct., pp. 1–25, 2023. DOI: 10.1080/15376494.2023.2183289.
   Web of Science ®Google Scholar
• S. Han, et al., Sustainable design of self-consolidating green concrete with partial replacements for cement through neural-network and fuzzy technique, Sustainability, vol. 15, no. 6, pp. 4752, 2023. DOI: 10.3390/su15064752.
   Web of Science ®Google Scholar
• E. Taheri, P. Mehrabi, S. Rafiei, and B. Samali, Numerical evaluation of the upright columns with partial reinforcement along with the utilisation of neural networks with combining feature-selection method to predict the load and displacement, Appl. Sci., vol. 11, no. 22, pp. 11056, 2021. DOI: 10.3390/app112211056.
   Google Scholar
• A. Firouzianhaji, N. Usefi, B. Samali, and P. Mehrabi, Shake table testing of standard cold-formed steel storage rack, Appl. Sci., vol. 11, no. 4, pp. 1821, 2021. DOI: 10.3390/app11041821.
   Google Scholar
• Danping Hu, Hongquan Sun, Peyman Mehrabi, Yasser A. Ali, and Muna Al-Razgan, Application of artificial intelligence technique in optimization and prediction of the stability of the walls against wind loads in building design, Mech. Adv. Mater. Struct., pp. 1–18, 2023. DOI: 10.1080/15376494.2023.2206208.
   Web of Science ®Google Scholar
• Ehsan Taheri, Ahmad Firouzianhaji, Peyman Mehrabi, Bahador Vosough Hosseini, and Bijan Samali, Experimental and numerical investigation of a method for strengthening cold-formed steel profiles in bending, Appl. Sci., vol. 10, no. 11, pp. 3855, 2020. DOI: 10.3390/app10113855.
   Google Scholar
• Jing Liu, Masoud Mohammadi, Yubao Zhan, Pengqiang Zheng, Maria Rashidi, and Peyman Mehrabi, Utilizing artificial intelligence to predict the superplasticizer demand of self-consolidating concrete incorporating pumice, slag, and fly ash powders, Materials, vol. 14, no. 22, pp. 6792, 2021. DOI: 10.3390/ma14226792.
   PubMed Web of Science ®Google Scholar
• Yuping Feng, Masoud Mohammadi, Lifeng Wang, Maria Rashidi, and Peyman Mehrabi, Application of artificial intelligence to evaluate the fresh properties of self-consolidating concrete, Materials, vol. 14, no. 17, pp. 4885, 2021. DOI: 10.3390/ma14174885.
   PubMed Web of Science ®Google Scholar
• X. Bai, Z. Zhang, H. Shi, Z. Luo, and T. Li, Identification of subsurface mesoscale crack in full ceramic ball bearings based on strain energy theory, Appl. Sci., vol. 13, no. 13, pp. 7783, 2023. DOI: 10.3390/app13137783.
   Google Scholar
• H. Shi, Z. Song, X. Bai, Y. Hu, T. Li, and K. Zhang, A novel digital twin model for dynamical updating and real-time mapping of local defect extension in rolling bearings, Mech. Syst. Sig. Process., vol. 193, pp. 110255, 2023. DOI: 10.1016/j.ymssp.2023.110255.
   Web of Science ®Google Scholar
• M. Cao, et al., Preparation and characterization for the thermal stability and mechanical property of PLA and PLA/CF samples built by FFF approach, Materials, vol. 16, no. 14, pp. 5023, 2023. DOI: 10.3390/ma16145023.
   PubMed Web of Science ®Google Scholar
• Li-Chuan Jia, et al., Self-standing boron nitride bulks enabled by liquid metal for thermal management, Mater. Horiz., 2023. DOI: 10.1039/D3MH01359Få.
   Web of Science ®Google Scholar
• S. Dong, H. Zhang, and D. Yuan, Supramolecular nonwoven materials via thermally induced precursor crystallization of nanocrystalline fibers/belts for recyclable air filters, ACS Appl. Nano Mater., vol. 6, no. 11, pp. 9548–9557, 2023. DOI: 10.1021/acsanm.3c01254.
   Web of Science ®Google Scholar
• J. Yang, H. Wu, and S. Kitipornchai, Buckling and postbuckling of functionally graded multilayer graphene platelet-reinforced composite beams, Compos. Struct., vol. 161, pp. 111–118, 2017. DOI: 10.1016/j.compstruct.2016.11.048.
   Web of Science ®Google Scholar
• E. Carrera, and D. Scano, Finite elements based on Jacobi shape functions for the free vibration analysis of beams, plates, and shells, Mech. Adv. Mater. Struct., pp. 1–9, 2023. DOI: 10.1080/15376494.2023.2219438.
   Web of Science ®Google Scholar
• E. Carrera, and V. Zozulya, Carrera unified formulation (CUF) for the micropolar plates and shells. I. Higher order theory, Mech. Adv. Mater. Struct., vol. 29, no. 6, pp. 773–795, 2022a. DOI: 10.1080/15376494.2020.1793241.
   Web of Science ®Google Scholar
• E. Carrera, and V. Zozulya, Carrera unified formulation for the micropolar plates, Mech. Adv. Mater. Struct., vol. 29, no. 22, pp. 3163–3186, 2022b. DOI: 10.1080/15376494.2021.1889726.
   Web of Science ®Google Scholar
• M. Marin, E. Carrera, and S. Vlase, An extension of the Hamilton variational principle for piezoelectric bodies with dipolar structure, Mech. Adv. Mater. Struct., vol. 30, no. 12, pp. 2453–2457, 2023. DOI: 10.1080/15376494.2022.2055239.
   Web of Science ®Google Scholar
• Y. Yan, E. Carrera, and A. Pagani, Free vibration analysis of curved metallic and composite beam structures using a novel variable-kinematic DQ method, Mech. Adv. Mater. Struct., vol. 29, no. 25, pp. 3743–3762, 2022. DOI: 10.1080/15376494.2021.1909784.
   Web of Science ®Google Scholar
• F. Tornabene, Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution, Comput. Methods Appl. Mech. Eng., vol. 198, no. 37-40, pp. 2911–2935, 2009. DOI: 10.1016/j.cma.2009.04.011.
   Web of Science ®Google Scholar
• M. Javani, Y. Kiani, and M.R. Eslami, On the free vibrations of FG-GPLRC folded plates using GDQE procedure, Compos. Struct., vol. 286, pp. 115273, 2022. DOI: 10.1016/j.compstruct.2022.115273.
   Web of Science ®Google Scholar
• S.-N. Nguyen, M. Cho, J.-S. Kim, and J.-W. Han, Improved thermo-mechanical-viscoelastic analysis of laminated composite structures via the enhanced Lo–Christensen–Wu theory in the laplace domain, Mech. Adv. Mater. Struct., vol. 30, no. 14, pp. 2899–2915, 2023. DOI: 10.1080/15376494.2022.2064571.
   Web of Science ®Google Scholar
• F. Durbin, Numerical inversion of Laplace transforms: an efficient improvement to Dubner and Abate’s method, Comput. J., vol. 17, no. 4, pp. 371–376, 1974. DOI: 10.1093/comjnl/17.4.371.
   Web of Science ®Google Scholar
• M.I. Jordan, and T.M. Mitchell, Machine learning: trends, perspectives, and prospects, Science., vol. 349, no. 6245, pp. 255–260, 2015. DOI: 10.1126/science.aaa8415.
   PubMed Web of Science ®Google Scholar
• D. Liu, Z. Li, S. Kitipornchai, and J. Yang, Three-dimensional free vibration and bending analyses of functionally graded graphene nanoplatelets-reinforced nanocomposite annular plates, Compos. Struct., vol. 229, pp. 111453, 2019. DOI: 10.1016/j.compstruct.2019.111453.
   Web of Science ®Google Scholar