Fastening solutions on composite structures: Progressive damage analysis of a unique bolted joint design for single-lap CFRP laminate

References

• T.J.C. Collings, On the bearing strengths of CFRP laminates, Composites, vol. 13, no. 3, pp. 241–252, 1982. DOI: 10.1016/0010-4361(82)90006-4.
   Google Scholar
• M.A. McCarthy, V.P. Lawlor, W.F. Stanley, and C.T. McCarthy, Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints, Compos. Sci. Tech., vol. 62, no. 10–11, pp. 1415–1431, 2002. DOI: 10.1016/S0266-3538(02)00088-X.
   Web of Science ®Google Scholar
• V.L. Virupaksha and S.A. Nassar, Effect of washers and bolt tension on the behavior of double-lap S2-glass fabric epoxy composite joints, ASME 2008 Pressure Vessels and Piping Conference. 2008. Conference Proceedings, vol. 3, pp. 607–616, 2009. DOI: 10.1115/PVP2008-61727.
   Google Scholar
• L.V. Awadhani and A. Bewoor, Parametric study of composite bolted joint under compressive loading, Procedia Manuf., vol. 22, pp. 186–195, 2018. DOI: 10.1016/j.promfg.2018.03.029.
   Google Scholar
• Z. Dawei, Z. Qi, F. Xiaoguang, and Z. Shengdun, Review on joining process of carbon fiber-reinforced polymer and metal: Methods and joining process, Rare Metal Mat. Eng., vol. 47, no. 12, pp. 3686–3696, 2018. DOI: 10.1016/S1875-5372(19)30018-9.
   Web of Science ®Google Scholar
• Y. Yang, Y-Q Wang, X. Liu, H. Gao, and Y. Bao, The effect of shimming material on flexural behavior for composite joints with assembly gap, Compos. Struct., vol. 209, pp. 375–382, 2019. DOI: 10.1016/j.compstruct.2018.10.086.
   Web of Science ®Google Scholar
• M. Fotouhi, M. Damghani, M.C. Leong, and S. Fotouhi, A comparative study on glass and carbon fibre reinforced laminated composites in scaled quasi-static indentation tests, Compos. Struct., vol. 245, pp. 112327, 2020. DOI: 10.1016/j.compstruct.2020.112327.
   Web of Science ®Google Scholar
• S. Huang, Q. Fu, L. Yan, and B. Kasal, Characterization of ınterfacial properties between fibre and polymer matrix in composite materials – A critical review, J Mater Res. Technol., vol. 13, pp. 1441–1484, 2021. DOI: 10.1016/j.jmrt.2021.05.076.
   Google Scholar
• P. Ranjan and A.K. Pandey, Modeling of pinning phenomenon in Iwan model for bolted joint, Tribol. Int., vol. 161, pp. 107071, 2021. DOI: 10.1016/j.triboint.2021.107071.
   Web of Science ®Google Scholar
• A. Olmedo, C. Santiuste, and E. Barbero, An analytical model for the secondary bending prediction in single-lap composite bolted-joints, Compos. Struct., vol. 111, pp. 354–361, 2014. DOI: 10.1016/j.compstruct.2014.01.015.
   Web of Science ®Google Scholar
• C.T. McCarthy, M.A. McCarthy, W.F. Stanley, V.P. Lawlor, Experiences with modeling friction in composite bolted joints, J. Compos. Mater., vol. 39, no. 21, pp. 1881–1908, 2005. DOI: 10.1177/0021998305051805.
   Web of Science ®Google Scholar
• C. Qiu, Z. Guan, S. Du, and Z. Li, An improved model for predicting stiffness of single-lap composites bolted joints using Matlab/Simulink, Mech. Adv. Mater. Struct., vol. 28, no. 14, pp. 1434–1444, 2021. DOI: 10.1080/15376494.2019.1675107.
   Web of Science ®Google Scholar
• C. Friedrich and H. Hubbertz, Friction behavior and preload relaxation of fastening systems with composite structures, Compos. Struct., vol. 110, pp. 335–341, 2014. DOI: 10.1016/j.compstruct.2013.11.024.
   Web of Science ®Google Scholar
• C. Chen, D. Hu, Q. Liu, and X. Han, Evaluation on the interval values of tolerance fit for the composite bolted joint, Compos. Struct., vol. 206, pp. 628–636, 2018. DOI: 10.1016/j.compstruct.2018.08.062.
   Web of Science ®Google Scholar
• J. Li, Y. Li, K. Zhang, P. Liu, and P. Zou, Interface damage behaviour during interference-fit bolt installation process for CFRP/Ti alloy joining structure, Fatigue Fract. Eng. Mat. Struct., vol. 38, no. 11, pp. 1359–1371, 2015. DOI: 10.1111/ffe.12313.
   Web of Science ®Google Scholar
• D. Song, Y. Li, K. Zhang, P. Liu, H. Cheng, and T. Wu, Stress distribution modeling for interference-fit area of each individual layer around composite laminates joint, Compos. B Eng., vol. 78, pp. 469–479, 2015. DOI: 10.1016/j.compositesb.2015.04.013.
   Web of Science ®Google Scholar
• J. Wei, G. Jiao, P. Jia, and T. Huang, The effect of interference fit size on the fatigue life of bolted joints in composite laminates, Compos. B Eng., vol. 53, pp. 62–68, 2013. DOI: 10.1016/j.compositesb.2013.04.048.
   Web of Science ®Google Scholar
• T. Wu, K. Zhang, H. Cheng, P. Liu, D. Song, and Y. Li, Analytical modeling for stress distribution around interference fit holes on pinned composite plates under tensile load, Compos. B Eng., vol. 100, pp. 176–185, 2016. DOI: 10.1016/j.compositesb.2016.06.011.
   Web of Science ®Google Scholar
• D. Song, Y. Li, K. Zhang, H. Cheng, P. Liu, and J. Hu, Micromechanical analysis for microscopic damage initiation in fiber/epoxy composite during interference-fit pin installation, Mater. Des., vol. 89, pp. 36–49, 2016. DOI: 10.1016/j.matdes.2015.09.118.
   Web of Science ®Google Scholar
• J. Hu, K. Zhang, Q. Yang, H. Cheng, P. Liu, and Y. Yang, An experimental study on mechanical response of single-lap bolted CFRP composite interference-fit joints, Compos. Struct., vol. 196, pp. 76–88, 2018. DOI: 10.1016/j.compstruct.2018.05.016.
   Web of Science ®Google Scholar
• J. Hu, K. Zahng, Y. Xu, G. Xu, and H. Li, Modeling on bearing behavior and damage evolution of single-lap bolted composite interference-fit joints, Compos. Struct., vol. 212, pp. 452–464, 2019. DOI: 10.1016/j.compstruct.2019.01.044.
   Web of Science ®Google Scholar
• J. Hu, K. Zhang, H. Cheng, and P. Z0u, Modeling on mechanical behavior and damage evolution of single-lap bolted composite interference-fit joints under thermal effects, Chinese J. Aeronaut., vol. 34, no. 8, pp. 230–244, 2021. DOI: 10.1016/j.cja.2020.09.023.
   Web of Science ®Google Scholar
• Y. Liu, M. Li, X. Lu, and Q. Li, Pull-out performance and optimization of a novel ınterference-fit rivet for composite joints, Compos. Struct., vol. 269, pp. 114041, 2021. DOI: 10.1016/j.compstruct.2021.114041.
   Web of Science ®Google Scholar
• Z. Sajid, S. Karuppanan, N. Sallih, K.E. Kee, and S.Z.H. Shah, Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint, Compos. Struct., vol. 266, pp. 113802, 2021. DOI: 10.1016/j.compstruct.2021.113802.
   Web of Science ®Google Scholar
• S. Noroozi, P. Sewell, and J. Vinney, Investigation of bolt group configurations on load distribution and joint failure, Mech. Adv. Mater. Struct., vol. 21, no. 5, pp. 422–432, 2014. DOI: 10.1080/15376494.2012.697604.
   Web of Science ®Google Scholar
• M. Ueda, S. Miyake, H. Hasegawa, and H. Hirano, Instantaneous mechanical fastening of quasi-isotropic CFRP laminates by a self-piercing rivet, Compos. Struct., vol. 94, no. 11, pp. 3388–3393, 2012. DOI: 10.1016/j.compstruct.2021.113802.
   Web of Science ®Google Scholar
• F. Hirsch, S. Müller, M. Machens, R. Staschko, N. Fuchs, and M. Köstner, Simulation of self-piercing rivetting processes in fibre reinforced polymers: material modelling and parameter identification, J. Mater. Process. Technol., vol. 241, pp. 164–177, 2017. DOI: 10.1016/j.jmatprotec.2016.10.010.
   Web of Science ®Google Scholar
• M. Oudjene, L. Ben-Ayed, A. Delamézière, and J.-L. Batoz, Shape optimization of clinching tools using the response surface methodology with moving least-square approximation, J. Mater. Process. Technol., vol. 209, no. 1, pp. 289–296, 2009. DOI: 10.1016/j.jmatprotec.2008.02.030.
   Web of Science ®Google Scholar
• F. Lambiase and D.-C. Ko, Two-steps clinching of aluminum and carbon fiber reinforced polymer sheets, Compos. Struct., vol. 164, pp. 180–188, 2017. DOI: 10.1016/j.compstruct.2016.12.072.
   Web of Science ®Google Scholar
• J. Wang, Y. Yu, C. Fu, H. Xiao, H. Wang, and X. Zheng, Experimental investigation of clinching CFRP/aluminum alloy sheet with prepreg sandwich structure, J. Mater. Process. Technol., vol. 277, pp. 116422, 2020. DOI: 10.1016/j.jmatprotec.2019.116422.
   Web of Science ®Google Scholar
• Z. Rao, Y. Yu, C. Fu, H. Xiao, H. Wang, and X. Zheng, A self-piercing-through riveting method for joining of discontinuous carbon fiber reinforced nylon 6 composite, Compos. Struct., vol. 237, pp. 111841, 2020. DOI: 10.1016/j.jmatprotec.2019.116422.
   Web of Science ®Google Scholar
• E. Oterkus, A. Barut, E. Madenci, S.S. Smeltzer, and D.R. Ambur, Bonded lap joints of composite laminates with tapered edges, Int. J. Solids Struct., vol. 43, no. 6, pp. 1459–1489, 2006. DOI: 10.1016/j.ijsolstr.2005.07.035.
   Web of Science ®Google Scholar
• E.M. Craciun, Energy criteria for crack propagation ın pre-stressed elastic composites, Lect. Notes Compos. Mater., vol. 154, pp. 193–235, 2009. DOI: 10.1007/978-1-4020-8772-1_7.
   Google Scholar
• L.P. Canal, C. González, J. Segurado, and J. LLorca, Intraply fracture of fiber-reinforced composites: microscopic mechanisms and modeling, Compos. Sci. Tech., vol. 72, no. 11, pp. 1223–1232, 2012. DOI: 10.1016/j.compscitech.2012.04.008.
   Web of Science ®Google Scholar
• J. Ekh, J. Schön, and D. Zenkert, Simple and efficient prediction of bearing failure in single shear, composite lap joints, Compos. Struct., vol. 105, pp. 35–44, 2013. DOI: 10.1016/j.compstruct.2013.04.038.
   Web of Science ®Google Scholar
• F. Nerilli and G. Vairo, Progressive damage in composite bolted joints via a computational micromechanical approach, Compos. B Eng., vol. 111, pp. 357–371, 2017. DOI: 10.1016/j.compositesb.2016.11.056.
   Web of Science ®Google Scholar
• J.-I. Choi, S.M. Hasheminia, H.-J. Chun, J.-C. Park, and H.S. Chang, Failure load prediction of composite bolted joint with clamping force, Compos. Struct., vol. 189, pp. 247–255, 2018. DOI: 10.1016/j.compstruct.2018.01.037.
   Web of Science ®Google Scholar
• X.F. Hu, A. Haris, M. Ridha, V.B.C. Tan, and T.E. Tay, Progressive failure of bolted single-lap joints of woven fibre-reinforced composites, Compos. Struct., vol. 189, pp. 443–454, 2018. DOI: 10.1016/j.compstruct.2018.01.104.
   Web of Science ®Google Scholar
• Y. Cao, Z. Cao, Y. Zhao, D. Zuo, and T.E. Tay, Damage progression and failure of single-lap thin-ply laminated composite bolted joints under quasi-static loading, Int. J. Mech. Sci., vol. 170, pp. 105360, 2020. DOI: 10.1016/j.ijmecsci.2019.105360.
   Web of Science ®Google Scholar
• C.T. McCarthy and M.A. McCarthy, 12 – Design and failure analysis of composite bolted joints for aerospace composites. In: Polymer Composites in the Aerospace Industry, 2nd ed., P. Irving and C. Soutis, editors. Woodhead Publishing, Cambridge, pp. 331–369, 2020.
   Google Scholar
• C. Qiu, Z. Guan, and S. Du, An improved characteristic length method for predicting the single bolt joint bearing strength considering secondary bending effect, Mech. Adv. Mater. Struct., vol. 29, no. 10, pp. 1405–1417, 2022. DOI: 10.1080/15376494.2020.1821265.
   Web of Science ®Google Scholar
• M.H. Mayer and L. Gaul, Segment-to-segment contact elements for modelling joint interfaces in finite element analysis, Mech. Syst. Signal Process., vol. 21, no. 2, pp. 724–734, 2007. DOI: 10.1016/j.ymssp.2005.10.006.
   Web of Science ®Google Scholar
• J.M. Guerrero, A. Sasikumar, J. Llobet, and J. Costa, A computationally efficient methodology to simulate hybrid bolted joints including thermal effects, Mech. Adv. Mater. Struct., vol. 30, no. 1, pp. 48–66, 2023. DOI: 10.1080/15376494.2021.2007555.
   Web of Science ®Google Scholar
• Y. Yang, Y. Bao, J. Wang, and F. Du, Extended spring–mass method for joint stiffness prediction of single-lap multi-bolt composite joints considering assembly gap and gap shimming, Mech. Adv. Mater. Struct., vol. 29, no. 27, pp. 5911–5922, 2022. DOI: 10.1080/15376494.2021.1968551.
   Web of Science ®Google Scholar
• Y. Zuo, Z. Cao, G. Zheng, and Q. Zhang, Damage behavior investigation of CFRP/Ti bolted joint during interference fit bolt dynamic installation progress, Eng. Fail. Anal., vol. 111, pp. 104454, 2020. DOI: 10.1016/j.engfailanal.2020.104454.
   Web of Science ®Google Scholar
• H. Jiang, C. Zeng, G. Li, and J. Cui, Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint, Compos. Struct., vol. 257, pp. 113162, 2021. DOI: 10.1016/j.compstruct.2020.113162.
   Web of Science ®Google Scholar
• E. Erbil and R. Karakuzu, Fastening solutions on composite structures: Model and verifications of contact with friction, progressive composite damage, and ductile metal damage, Modell. Simul. Mater. Sci. Eng., vol. 31, no. 5, pp. 055007, 2023. DOI: 10.1088/1361-651X/acd70d.
   Web of Science ®Google Scholar
• K.B. Othmen, N. Haddar, A. Jegat, P.-Y. Manach, and K. Elleuch, Ductile fracture of AISI 304L stainless steel sheet in stretching, Int. J. Mech. Sci., vol. 172, pp. 105404, 2020. DOI: 10.1016/j.ijmecsci.2019.105404.
   Web of Science ®Google Scholar
• C.T. McCarthy, R.M. O’Higgins, and R.M. Frizzell, A cubic spline implementation of non-linear shear behaviour in three-dimensional progressive damage models for composite laminates, Compos. Struct., vol. 92, no. 1, pp. 173–181, 2010. DOI: 10.1016/j.compstruct.2009.07.025.
   Web of Science ®Google Scholar
• Á. Olmedo and C. Santiuste, On the prediction of bolted single-lap composite joints, Compos. Struct., vol. 94, no. 6, pp. 2110–2117, 2012. DOI: 10.1016/j.compstruct.2012.01.016.
   Web of Science ®Google Scholar