Strength and damage analysis of composite tube with metal lining

References

• J. H. Almeida, M. L. Ribeiro, V. Tita, and S. C. Amico, Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression, Compos. Struct., vol. 160, pp. 204–210, 2017. DOI: 10.1016/j.compstruct.2016.10.036.
   Web of Science ®Google Scholar
• J. Xiao, H. Shi, L. Tao, L. Qi, W. Min, H. Zhang, M. Yu, Z. Sun, Effect of fibres on the failure mechanism of composite tubes under low-velocity impact, Materials., vol. 13, no. 18, pp. 4143, 2020. DOI: 10.3390/ma13184143.
   PubMed Web of Science ®Google Scholar
• F.G. Alabtah, E. Mahdi, and F.F. Eliyan, The use of fiber reinforced polymeric composites in pipelines: a review, Compos. Struct., vol. 276, pp. 114595, 2021. DOI: 10.1016/j.compstruct.2021.114595.
   Web of Science ®Google Scholar
• J.G. Teng, T. Yu, and D. Fernando, Strengthening of steel structures with fiber-reinforced polymer composites, J. Constr. Steel Res., vol. 78, pp. 131–143, 2012. DOI: 10.1016/j.jcsr.2012.06.011.
   Web of Science ®Google Scholar
• H. Han, F. Taheri, and N. Pegg, Crushing behaviors and energy absorption efficiency of hybrid pultruded and ±45° braided tubes, Mech. Adv. Mater. Struct., vol. 18, no. 4, pp. 287–300, 2011. DOI: 10.1080/15376494.2010.506103.
   Web of Science ®Google Scholar
• Y. Zha, Q. Ma, X. Gan, M. Cai, and T. Zhou, Deformation and energy absorption characters of Al‐CFRP hybrid tubes under quasi‐static radial compression, Polym. Compos., vol. 41, no. 11, pp. 4602–4618, 2020. DOI: 10.1002/pc.25737.
   Web of Science ®Google Scholar
• B. Yang, Y. Chen, K. Fu, and G. Wei, Simulating progressive damage behaviors of carbon fiber reinforced composite tubes triggered by various initiators under axial crushing, Mech. Adv. Mater. Struct., pp. 1–9, 2023. DOI: 10.1080/15376494.2023.2212269.
   Web of Science ®Google Scholar
• H. Luo, Y. Yan, and T. Zhang, Gradually failure simulation and energy absorption characteristics of GFRP composite tubes subjected to axial dynamic impact, Polym. Compos., vol. 40, no. 4, pp. 1545–1555, 2019. DOI: 10.1002/pc.24896.
   Web of Science ®Google Scholar
• Y. Guo, M. Gil Pérez, G. Serhat, and J. Knippers, A design methodology for fiber layup optimization of filament wound structural components, Structures., vol. 38, pp. 1125–1136, 2022. DOI: 10.1016/j.istruc.2022.02.048.
   Web of Science ®Google Scholar
• Y. Xue, L. Xun, Z. Li, B. Gu, and B. Sun, Microstructural modeling of temperature distribution and heat transfer of 3-D carbon fiber braided circular composite tubes under direct current, Aerosp. Sci. Technol., vol. 139, pp. 108376, 2023. DOI: 10.1016/j.ast.2023.108376.
   Web of Science ®Google Scholar
• L. Xun, S. Huang, B. Sun, and B. Gu, Torsional cracks development in carbon-fiber 3-D braided composite tubes, Thin. Walled Struct., vol. 184, pp. 110477, 2023. DOI: 10.1016/j.tws.2022.110477.
   Web of Science ®Google Scholar
• X. Wu, B. Sun, B. Wang, and X. Shi, X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression, Compos. Commun., vol. 41, pp. 101650, 2023. DOI: 10.1016/j.coco.2023.101650.
   Web of Science ®Google Scholar
• Y. Shen, Z. Wu, and X. Hu, Inward eccentric fold failure in the progressive crushing of aluminum-CFRP square hybrid tubes, Mech. Adv. Mater. Struct., vol. 30, no. 4, pp. 738–750, 2023. DOI: 10.1080/15376494.2021.2023917.
   Web of Science ®Google Scholar
• S. Anand, J.-E. Chambe, C. Bouvet, and S. Rivallant, Stacking sequence optimization of composite tubes submitted to crushing using the discrete ply model (DPM), Mech. Adv. Mater. Struct., 2022.
   Web of Science ®Google Scholar
• J. Liu, Y. Xian, D. Cao, J. Su, W. Liao, M. Ding, and Z. Su, Study of the design and torsion performance for carbon fiber composite material automobile drive shaft, Proceedings of SAE-China Congress 2016: Selected Papers, pp. 303–312, Singapore, 2017.
   Google Scholar
• D.-M. Yin, B.-M. Li, and H.-C. Xiao, Analysis for the residual prestress of composite barrel for railgun with tension winding, Defence Technol., vol. 16, no. 4, pp. 893–899, 2020. DOI: 10.1016/j.dt.2019.11.008.
   Web of Science ®Google Scholar
• A.F. Hamed, Y.A. Khalid, S.M. Sapuan, M.M. Hamdan, T.S. Younis, and B.B. Sahari, Effects of winding angles on the strength of filament wound composite tubes subjected to different loading modes, Polym. Polym. Compos., vol. 15, no. 3, pp. 199–206, 2007. DOI: 10.1177/096739110701500304.
   Web of Science ®Google Scholar
• S. Alimirzaei, M. Ahmadi Najafabadi, A. Nikbakht, and L. Pahlavan, Investigation of energy absorption capacity of 3D filament wound composite tubes: experimental evaluation, numerical simulation, and acoustic emission monitoring, Mech. Adv. Mater. Struct., pp. 1–16, 2023. DOI: 10.1080/15376494.2022.2163437.
   Web of Science ®Google Scholar
• M. Emadi, H. Beheshti, and M. Heidari-Rarani, Thickness effect study on the crushing characteristics of aluminum and composite tubes: numerical analysis and multi-objective optimization, Mech. Adv. Mater. Struct., vol. 28, no. 24, pp. 2585–2594, 2021. DOI: 10.1080/15376494.2020.1747667.
   Web of Science ®Google Scholar
• M. Koloushani, M.R. Forouzan, and M.R. Niroomand, On the crashworthiness performance of thin-walled circular tubes: effect of diameter and thickness, Mech. Adv. Mater. Struct., pp. 1–13, 2023. DOI: 10.1080/15376494.2023.2206839.
   Web of Science ®Google Scholar
• M. Oloumi Doudaran, H. Ahmadi, G. Liaghat, and M. Seidi, Experimental and numerical investigation on crashworthiness of composite reinforced auxetic cellular tubes, Mech. Adv. Mater. Struct., pp. 1–23, 2023. DOI: 10.1080/15376494.2023.2248115.
   Web of Science ®Google Scholar
• R. Guélou, F. Eyma, A. Cantarel, S. Rivallant, and B. Castanié, Dynamic crushing of wood-based sandwich composite tubes, Mech. Adv. Mater. Struct., vol. 29, no. 27, pp. 7004–7024, 2022. DOI: 10.1080/15376494.2021.1991533.
   Web of Science ®Google Scholar
• L.A.L. Martins, F.L. Bastian, and T.A. Netto, Reviewing some design issues for filament wound composite tubes, Mater. Des., vol. 55, pp. 242–249, 2014. DOI: 10.1016/j.matdes.2013.09.059.
   Web of Science ®Google Scholar
• H. Takuda, Prediction of forming limit of high-strength steel sheets by means of criterion for ductile fracture, KEM., vol. 251–252, pp. 1–6, 2003. DOI: 10.4028/www.scientific.net/KEM.251-252.1.
   Google Scholar
• J. Kim, S.-J. K, and B.-S. Kang, A prediction of bursting failure in tube hydroforming processes based on ductile fracture criterion, Int. J. Adv. Manuf. Technol., vol. 22, no. 5–6, pp. 357–362, 2003. DOI: 10.1007/s00170-002-1489-6.
   Web of Science ®Google Scholar
• Y.K. Ko, J.S. Lee, H. Huh, H.K. Kim, and S.H. Park, Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion, J. Mater. Process. Technol., vol. 187–188, pp. 358–362, 2007. DOI: 10.1016/j.jmatprotec.2006.11.071.
   Web of Science ®Google Scholar
• Q. Guo, W. Yao, W. Li, and N. Gupta, Constitutive models for the structural analysis of composite materials for the finite element analysis: a review of recent practices, Compos. Struct., vol. 260, pp. 113267, 2021. DOI: 10.1016/j.compstruct.2020.113267.
   Web of Science ®Google Scholar
• P. Maimí, P.P. Camanho, J.A. Mayugo, and C.G. Davila, A continuum damage model for composite laminates: part I – Constitutive model, Mech. Mater., vol. 39, no. 10, pp. 897–908, 2007. DOI: 10.1016/j.mechmat.2007.03.005.
   Web of Science ®Google Scholar
• F. Lauro, B. Bennani, P. Drazetic, J. Oudin, and X. Ni, Ductile damage and fracture finite element modelling of elasto-viscoplastic voided materials, Comput. Mater. Sci., vol. 7, no. 3, pp. 295–307, 1997. DOI: 10.1016/S0927-0256(96)00098-5.
   Web of Science ®Google Scholar
• K. Foroutan, E. Carrera, A. Pagani, and H. Ahmadi, Post-buckling and large-deflection analysis of a sandwich FG plate with FG porous core using Carrera’s Unified Formulation, Compos. Struct., vol. 272, pp. 114189, 2021. DOI: 10.1016/j.compstruct.2021.114189.
   Web of Science ®Google Scholar
• P.X. Shi Yang Zhao, New two-dimensional polynomial failure criteria for composite materials, Adv. Mater. Sci. Eng., vol. 2014, pp. 1–7, 2014.
   Web of Science ®Google Scholar
• J.-H. Kweon, S.-Y. Shin, and J.-H. Choi, A two-dimensional progressive failure analysis of pinned joints in unidirectional-fabric laminated composites, J. Compos. Mater., vol. 41, no. 17, pp. 2083–2104, 2007. DOI: 10.1177/0021998307074131.
   Web of Science ®Google Scholar
• P. Cheng, Y. Peng, S. Li, Y. Rao, A. L. Duigou, K. Wang, S. Ahzi, 3D printed continuous fiber reinforced composite lightweight structures: a review and outlook, Compos. B Eng., vol. 250, pp. 110450, 2023. DOI: 10.1016/j.compositesb.2022.110450.
   Web of Science ®Google Scholar
• Z. Zhang, S. Hou, Q. Liu, and X. Han, Winding orientation optimization design of composite tubes based on quasi-static and dynamic experiments, Thin. Walled Struct., vol. 127, pp. 425–433, 2018. DOI: 10.1016/j.tws.2017.11.052.
   Web of Science ®Google Scholar
• S. Natarajan, R. K. Annabattula, Hirshikesh, A FEniCS implementation of the phase field method for quasi-static brittle fracture. Front. Struct. Civ. Eng. vol. 13, no. 2, pp. 380–396, 2019. DOI: 10.1007/s11709-018-0471-9.
   Web of Science ®Google Scholar
• L. Chen, P.L. Wang, P.N. Song, and J.Y. Zhang, Finite element numerical simulation of temperature field in metal pattern casting system and “reverse method” of defining the thermal physical coefficient, Acta Metal Sin., vol. 20, no. 3, pp. 217–224, 2007. DOI: 10.1016/S1006-7191(07)60029-5.
   Google Scholar
• S. Song, C. Xiong, J. Zheng, J. Yin, Y. Zou, and X. Zhu, Compression, bending, energy absorption properties, and failure modes of composite Kagome honeycomb sandwich structure reinforced by PMI foams, Compos. Struct., vol. 277, pp. 114611, 2021. DOI: 10.1016/j.compstruct.2021.114611.
   Web of Science ®Google Scholar
• S. Song, C. Xiong, J. Yin, and X. Kang, Fabrication and mechanical behavior of an all‐composite interlocked triangular honeycomb sandwich structure: experimental investigation and numerical analysis, Polym. Compos., vol. 44, no. 2, pp. 833–849, 2023. DOI: 10.1002/pc.27135.
   Web of Science ®Google Scholar
• M. Surgeon, E. Vanswijgenhoven, M. Wevers, and O. Van Der Biest, Transverse cracking and Poisson’s ratio reduction in cross-ply carbon fibre-reinforced polymers, J. Mater. Sci., vol. 34, no. 22, pp. 5513–5517, 1999. DOI: 10.1023/A:1004716612960.
   Web of Science ®Google Scholar
• J.H.S. Almeida, M.L. Tonatto, M.L. Ribeiroc, V. Tita, and S. Amico, Buckling and post-buckling of filament wound composite tubes under axial compression: liner, nonliner, damage and experiment and experimental analyses, Compos. B. Eng., vol. 149, pp. 227–239, 2018.
   Web of Science ®Google Scholar
• B. Li, C. Xiong, Y.-S. Zhang, and J.-X. Gao, Multi-objective optimization design of CFRP winding mortar barrel with metal liner based on MOPSO, KEM., vol. 753, pp. 109–113, 2017. DOI: 10.4028/www.scientific.net/KEM.753.109.
   Google Scholar
• T. Jollivet, C. Peyrac, and F. Lefebvre, Damage of composite materials, Proc. Eng., vol. 66, pp. 746–758, 2013. DOI: 10.1016/j.proeng.2013.12.128.
   Google Scholar