Effect of Al₂O₃ nanoparticles on the steel-glass/epoxy composite joint bonded by a two-component structural acrylic adhesive

References

• Ariaee, S., Tutunchi, A., Kianvash, A., and Entezami, A. A. (2014) Modeling and optimization of mechanical behavior of bonded composite–steel single lap joints by response surface methodology. Int. J. Adhes. Adhes., 54:30–39.
   Web of Science ®Google Scholar
• Vietri, U., Guadagno, L., Raimondo, M., Vertuccio, L., and Lafdi, K. (2014) Nanofilled epoxy adhesive for structural aeronautic materials. Compos. Part B. Eng., 61:73–83.
   Web of Science ®Google Scholar
• Sancaktar, E., and Kumar, S. (2000) Selective use of rubber toughening to optimize lap-joint strength. J. Adhes. Sci. Technol., 14:1265–1296.
   Web of Science ®Google Scholar
• Dean, G., Crocker, L., Read, B., and Wright, L. (2004) Prediction of deformation and failure of rubber-toughened adhesive joints. Int. J. Adhes. Adhes., 24:295–306.
   Web of Science ®Google Scholar
• Buchman, A., Dodiuk-Kenig, H., Dotan, A., Tenne, R., and Kenig, S. (2009) Toughening of epoxy adhesives by nanoparticles. J. Adhes. Sci. Technol., 23:753–768.
   Web of Science ®Google Scholar
• Kinloch, A. J., Lee, J. H., Taylor, A. C., Sprenger, S., Eger, C., and Egan, D. (2003) Toughening structural adhesives via nano-and micro-phase inclusions. J. Adhesion., 79:867–873.
   Web of Science ®Google Scholar
• Zhang, J., Luo, R., and Yang, C. (2012) A multi-wall carbon nanotube-reinforced high-temperature resistant adhesive for bonding carbon/carbon composites. Carbon., 50:4922–4925.
   Web of Science ®Google Scholar
• Yu, S., Tong, M. N., and Critchlow, G. (2010) Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates. Mater. Design., 31:S126–S129.
   Google Scholar
• Shneider, M., Dodiuk, H., Kenig, S., and Tenne, R. (2010) The effect of tungsten sulfide fullerene-like nanoparticles on the toughness of epoxy adhesives. J. Adhes. Sci. Technol., 24:1083–1095.
   Web of Science ®Google Scholar
• Pavlidou S, and Papaspyrides CD (2008) A review on polymer–layered silicate nanocomposites. Prog. Polym. Sci., 33:1119–1198
   Web of Science ®Google Scholar
• Jordan, J., Jacob, K. I., Tannenbaum, R., Sharaf, M. A., and Jasiuk, I. (2005) Experimental trends in polymer nanocomposites—a review. Mat Sci. Eng. A- Struct., 393:1–11.
   Web of Science ®Google Scholar
• Kim, D. H., and Kim, H. S. (2013) Waterproof characteristics of nanoclay/epoxy nanocomposite in adhesively bonded joints. Compos. Part B- Eng., 55: 86–95.
   Web of Science ®Google Scholar
• Taylor, A. C. (2011) Adhesives with Nanoparticles. In Handbook of Adhesion Technology (pp. 1437–1460). Springer: Berlin/Heidelberg.
   Google Scholar
• Kinloch, A. J., Lee, J. H., Taylor, A. C., Egan, D., Eger, C., and Sprenger, S. (2003) Nanoadhesives: toughness and high strength. Adhäsion Kleben & Dichten., 47:20–24.
   Google Scholar
• Hartwig, A., Lühring, A., and Trautmann, J. (2009) Spheroidal Nanoparticles in Epoxide‐Based Adhesives. Macromol. Mater.Eng., 294:363–379.
   Web of Science ®Google Scholar
• Wolf, A., Buchman, A., Eitan, A., Fine, T., Nevo, Y., Heyman, A., and Shoseyov, O. (2012) Improved adhesives containing CNT/SP1 nano fillers. J. Adhesion., 88:435–451.
   Web of Science ®Google Scholar
• Feng, L., & Bae, D. H. (2013) Joining STS304l sheets by using nano-adhesives. J. Mech. Sci. Technol., 27:1943–1947.
   Web of Science ®Google Scholar
• Vietri, U., Guadagno, L., Raimondo, M., Vertuccio, L., and Lafdi, K. (2014) Nanofilled epoxy adhesive for structural aeronautic materials. Compos. Part B. Eng., 61:73–83.
   Web of Science ®Google Scholar
• Hsiao, K. T., Alms, J., and Advani, S. G. (2003) Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites. Nanotechnology, 14: 791–793.
   Web of Science ®Google Scholar
• Dorigato, A., Pegoretti, A., Bondioli, F., and Messori, M. (2010) Improving epoxy adhesives with zirconia nanoparticles. Compos. Interface., 17:873–892.
   Web of Science ®Google Scholar
• Dorigato, A., and Pegoretti, A. (2011) The role of alumina nanoparticles in epoxy adhesives. J. Nanopart. Res., 13:2429–2441.
   Web of Science ®Google Scholar
• Meguid, S. A., and Sun, Y. (2004) On the tensile and shear strength of nano-reinforced composite interfaces. Mater. Design., 25:289–296.
   Web of Science ®Google Scholar
• Allen, K. W. (1989) Acrylates as reactive adhesives. Int. J. Adhes. Adhes., 9:103–105.
   Web of Science ®Google Scholar
• Melody, D. P. (1989) Advances in room temperature curing adhesives and sealants—a review. Brit. Polym. J., 21:175–179.
   Web of Science ®Google Scholar
• Lees, W. A. (1979) The science of acrylic adhesives. Brit. Polym. J., 11:64–71.
   Web of Science ®Google Scholar
• Kaboorani, A., and Riedl, B. (2012) Nano-aluminum oxide as a reinforcing material for thermoplastic adhesives. J. Ind. Eng. Chem., 18:1076–1081.
   Web of Science ®Google Scholar
• Efrat, T., Dodiuk, H., Kenig, S., and McCarthy, S. (2006) Nanotailoring of polyurethane adhesive by polyhedral oligomeric silsesquioxane (POSS). J. Adhes. Sci. Technol., 20:1413–1430.
   Web of Science ®Google Scholar
• Sangerano, M., Pallaro, E., Roppolo, I., and Rizza, G. (2009) UV-cured epoxy coating reinforced with sepiolite as inorganic filler. J. Mater. Sci., 44:3165–3171.
   Web of Science ®Google Scholar
• Pang, B., Ryu, C. M., and Kim, H. I. (2013) Improvement of thermal stability of UV curable pressure sensitive adhesive by surface modified silica nanoparticles. Mat. Sci. Eng. B-Struct., 178:1212–1218.
   Web of Science ®Google Scholar