Determination of the Poisson’s ratio of viscoelastic materials based on the linear rheological model using instrumented indentation

References

• Islam, M. R., Faisal, H. M., and Tarefder, R. A. (2015) Determining temperature and time dependent Poisson’s ratio of asphalt concrete using indirect tension test. Fuel. 146:119–124.
   Web of Science ®Google Scholar
• Kaushik, M., Saed, M., and Torsten, S. (2006) On the estimation of complex modulus and Poisson’s ratio using longitudinal wave experiments. Mech. Syst. Signal Pr. 20:2080–2094.
   Web of Science ®Google Scholar
• Yin, D. S., Duan, X. M., and Zhou, X. J. (2013) Fractional time-dependent deformation component models for characterizing viscoelastic Poisson’s ratio. Eur. J. Mech. A-Solid. 42:422–429.
   Web of Science ®Google Scholar
• Li, X., Grasley, Z. C., Bullard, J. W., and Garboczi, E. J. (2015) Computing the time evolution of the apparent viscoelastic/viscoplastic Poisson’s ratio of hydrating cement paste. Cement Concrete Comp. 56:121–133.
   Web of Science ®Google Scholar
• Tschoegl, N. W., Wolfgang, G. K., and Igor, E. (2002) Poisson’s Ratio in linear viscoelasticity – a critical review. Mech. Time-Depend Mat. 6:3–51.
   Web of Science ®Google Scholar
• Addiego, F., Dahoun, A., Sell, C. G., and Hiver, J. (2006) Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene. Polymer. 47:4387–4399.
   Web of Science ®Google Scholar
• Fathi, J., Ashrafi, S., Movla, H., and Sobhaian, S. (2012) A novel method to determine Poisson’s ratio by beta-ray absorption experiment. Appl. Radiat. Isotopes. 70:823–826.
   PubMed Web of Science ®Google Scholar
• Kim, J. H., Yeon, S. C., Jeon, Y. K., Kim, J. G., and Kim, Y. H. (2003) Nano-indentation method for the measurement of the Poisson’s ratio of MEMS thin films. Sensor. Actuat. A-Phy. 108:20–27.
   Web of Science ®Google Scholar
• Rouzic, J. L., Delobelle, P., Cretin, B., Vairac, P., and Amiot, F. (2012) Simultaneous measurement of Young’s modulus and Poisson’s ratio at microscale with two-modes scanning microdeformation microscopy. Mater. Lett. 68:370–373.
   Web of Science ®Google Scholar
• Righetti, R., Ophir, J., Srinivasan, S., and Krouskop, T. A. (2004) The feasibility of using elastography for imaging the Poisson’s ratio in porous media. Ultrasound Med. Biol. 30:215–228.
   PubMed Web of Science ®Google Scholar
• Zhang, C. Y., and Zhang, Y. W. (2005) Nanoindentation of polymers with a sharp indenter. J. Mater. Res. 20:1597–1605.
   Google Scholar
• Cifuentes, S. C., Frutos, E., Benavente, R., González-Carrasco, J. L., and Lorenzo, V. (2014) Strain rate effect on semi-crystalline PLLA mechanical properties measured by instrumented indentation tests. Eur. Polym. J. 59:239–246.
   Web of Science ®Google Scholar
• Goodall, R., and Clyne, T. W. (2006) A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature. Acta Mater. 54:5489–5499.
   Web of Science ®Google Scholar
• Dean, J., Bradbury, A., Aldrich-Smith, G., and Clyne, T. W. (2013) A procedure for extracting primary and secondary creep parameters from nanoindentation data. Mech. Mater. 65:124–134.
   Web of Science ®Google Scholar
• Ma, Y., Peng, G. J., Wen, D. H., and Zhang, T. H. (2015) Nanoindentation creep behaviour in a CoCrFeCuNi high-entropy alloy film with two different structure states. Mat. Sci. Eng. A. 621:111–117.
   Web of Science ®Google Scholar
• Lee, E. H., and Radok, J. R. M. (1960) The contact problem for viscoelastic bodies. J. Appl. Mech. 27:438–444.
   Google Scholar
• Mencik, J., He, L. H., and Swain, M. V. (2009) Determination of viscoelastic–plastic material parameters of biomaterials by instrumented indentation. J. Mech. Behav. Biomed. 2:318–325.
   PubMed Web of Science ®Google Scholar
• Oyen, M. L., and Cook, R. F. (2003) Load-displacement behaviour during sharp indentation of viscous-elastic-plastic materials. J. Mater. Res. 18:139–150.
   Web of Science ®Google Scholar
• Pharr, G. M., and Bolshakov, A. (2002) Understanding nanoindentation unloading curves. J. Mater. Res. 17:2660–2671.
   Web of Science ®Google Scholar
• Sakai, M. (2003) Elastic recovery in the unloading process of pyramidal microindentation. J. Mater. Res. 18:1631–1640.
   Google Scholar
• Jin, T., Zhou, Z. W., Liu, Z. G., Xiao, G. S., Yuan, G. Z., and Shu, X. F. (2015) Sensitivity of PMMA nanoindentation measurements to strain rate. J. Appl. Polym. Sci 41:1–6.
   Google Scholar
• Li, M. C., Wu, Q. L., Song, K. L., Qing, Y., and Wu, Y. Q. (2015) Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids. ACS Appl. Mater. Inter. 7:5006–5016.
   PubMed Web of Science ®Google Scholar
• Oliver, W. C., and Pharr, G. M. (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7:1564–1583.
   Web of Science ®Google Scholar
• Oyen, M. L. (2006) Analytical techniques for indentation of viscoelastic materials. Philos. Mag. 86:5625–564.
   Web of Science ®Google Scholar
• Zhou, S. X., Hu, H. J., Li, J., He, Y. L., and Li, D. K. (2010) Measurement of Poisson’s ratio of linear viscoelastic materials by nano-indentation. Lub. Eng. Sin. 35:37–40, 44.
   Google Scholar
• Shaw, M. T., and MacKnight, W. J. (2005). Introduction to polymer viscoelasticity (3rd ed.); John Wiley & Sons, Inc: Hoboken, New Jersey.
   Google Scholar
• ASTM Standard D638-03. (2003). Standard test method for determining J-R curves of plastic materials; ASTM International: West Conshohocken, PA.
   Google Scholar
• Andrzej, P., Andrzej, G., and Artur, R. (2014) Cavitation during deformation of semicrystalline polymers. Prog. Polym. Sci. 39:921–958</NR>.
   PubMed Web of Science ®Google Scholar