References
- Kovacs, J. G.; Suplicz, A. Thermally Conductive Polymer Compounds for Injection Moulding: The Synergetic Effect of Hexagonal Boron-nitride and Talc. J. Reinf. Plast. Compos. 2013, 32(16), 1234–1240. DOI: https://doi.org/10.1177/0731684413489755.
- Bujard, P.; Kuhnlein, G.; Ino, S.; Shiobara, T. Thermal Conductivity of Molding Compounds for Plastic Packaging. IEEE Trans. Compon. Packag. Manuf. Technol. Part A. 1994, 17(4), 527–532. DOI: https://doi.org/10.1109/95.335037.
- Haghnegahdar, M.; Naderi, G.; Ghoreishy, M. H. R. Electrical and Thermal Properties of a Thermoplastic Elastomer Nanocomposite Based on Polypropylene/ethylene Propylene Diene Monomer/graphene. Soft Mater. 2017, 15(1), 82–94. DOI: https://doi.org/10.1080/1539445X.2016.1268622.
- Balandin, A. A.; Ghosh, S.; Bao, W.; Calizo, I.; Teweldebrhan, D.; Miao, F.; Lau, C. N. Superior Thermal Conductivity of Single-layer Graphene. Nano Lett. 2008, 8(3), 902. DOI: https://doi.org/10.1021/nl0731872.
- Liu, S.; Yang, J.; Gan, Z.; Luo, X. Structural Optimization of a Microjet Based Cooling System for High Power LEDs. Int. J. Therm. Sci. 2008, 47(8), 1086–1095. DOI: https://doi.org/10.1016/j.ijthermalsci.2007.09.005.
- Huang, R. T.; Sheu, W. J.; Wang, C. C. Orientation Effect on Natural Convective Performance of Square Pin Fin Heat Sinks. Int. J. Heat Mass Transfer. 2008, 51(9–10), 2368–2376. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.08.014.
- Dialameh, L.; Yaghoubi, M.; Abouali, O. Natural Convection from an Array of Horizontal Rectangular Thick Fins with Short Length. Appl. Therm. Eng. 2008, 28(17–18), 2371–2379. DOI: https://doi.org/10.1016/j.applthermaleng.2008.01.020.
- Kong, S. M.; Mariatti, M.; Busfield, J. J. C. Effects of Types of Fillers and Filler Loading on the Properties of Silicone Rubber Composites. J. Reinf. Plast. Compos. 2011, 30(13), 1087–1096. DOI: https://doi.org/10.1177/0731684411416267.
- Elmendorp, J. J.; Maalcke, R. J. A Study on Polymer Blending Microrheology: Part 1. Polym. Eng. Sci. 2010, 26(6), 418–426. DOI: https://doi.org/10.1002/pen.760251608.
- Shen, S.; Henry, A.; Tong, J.; Zheng, R.; Chen, G. Polyethylene Nanofibers with Very High Thermal Conductivities. Nat. Nanotech. 2010, 5(4), 251–255. DOI: https://doi.org/10.1038/nnano.2010.27.
- Chen, H.; Ginzburg, V. V.; Yang, J.; Yang, Y.; Liu, W.; Huang, Y.; Du, L.; Chen, B. Thermal Conductivity of Polymer-based Composites: Fundamentals and Applications. Prog. Polym. Sci. 2016, 59, 41–85. DOI: https://doi.org/10.1016/j.progpolymsci.2016.03.001.
- Zhang, H.; Li, Y.; Yang, G.; Yu, M.; Shao, H. Effect of Interfacial Modification on the Thermo-mechanical Properties of Flax Reinforced Polylactide Stereocomplex Composites. J. Polymer Eng. 2020, 40(5), 403–408. DOI: https://doi.org/10.1515/polyeng-2020-0010.
- Yin, T.; Gu, Y. Q.; Gao, J. H.; Yu, W. Y. Co-Continuous PPS/PA66 Composites - Part I: Phase Morphology and Structure. Adv. Mater. Res. 2013, 804, 98–101. DOI: https://doi.org/10.4028/w ww.scientific.net/AMR.804.98.
- Cao, J. P.; Zhao, X.; Zhao, J.; Zha, J. W.; Hu, G. H.; Dang Z. M. Improved Thermal Conductivity and Flame Retardancy in Polystyrene/Poly(vinylidene Fluoride) Blends by Controlling Selective Localization and Surface Modification of SiC Nanoparticles. Appl. Mater. Interfaces. 2013, 5(15), 6915–6924. DOI: https://doi.org/10.1021/am401703m.
- Gubbels, F.; Jerome, R.; Vanlathem, E.; Deltour, R.; Blacher, S.; Brouers, F. Kinetic and Thermodynamic Control of the Selective Localization of Carbon Black at the Interface of Immiscible Polymer Blends. Chem. Mater. 1998, 10(5), 1227–1235. DOI: https://doi.org/10.1021/cm970594d.
- Zhang, C.; Yi, X. S.; Yui, H.; Asai, S.; Sumita, M. Selective Location and Double Percolation of Short Carbon Fiber Filled Polymer Blends: High-density Polyethylene/isotactic Polypropylene. Mater. Lett. 1998, 36(1), 186–190. DOI: https://doi.org/10.1016/S0167-577X(98)00023-8.
- Zhou, S.; Chen, Y.; Zou, H.; Liang, M. Thermally Conductive Composites Obtained by Flake Graphite Filling Immiscible Polyamide 6/Polycarbonate Blends. Thermochim. Acta 2013, 566, 84–91. DOI: https://doi.org/10.1016/j.tca.2013.05.027.
- Al-Saleh, M. H.; Sundararaj, U. An Innovative Method to Reduce Percolation Threshold of Carbon Black Filled Immiscible Polymer Blends. Compos. Part A: Appl. Sci. Manuf. 2008, 39(2), 284–293. DOI: https://doi.org/10.1016/j.compositesa.2007.10.010.
- Zhou, S.; Luo, W.; Zou, H.; Liang, M.; Li, S. Enhanced Thermal Conductivity of Polyamide 6/polypropylene (PA6/PP) Immiscible Blends with High Loadings of Graphite. J. Compos. Mater. 2016, 50(3), 1–11. DOI: https://doi.org/10.1177/0021998315574753.
- Sagar, S.; Iqbal, N.; Maqsood, A. Multiwalled Carbon Nanotubes Impregnated Rubber Nanocomposites: Thermal Transport/decomposition and Differential Scanning Calorimetric Study. J. Reinf. Plast. Compos. 2013, 32(14), 1052–1061. DOI: https://doi.org/10.1177/0731684413484184.
- Zhang, Z. M.; Zhao, X. T.; Shi, J. X.; Yang, H.; Zhang, H. Molecular Dynamics Simulation on the Scaling Relation of Single Polymer Chain Diffusion on Single Wall Carbon Nanotube. Soft Mater. 2020. DOI: https://doi.org/10.1080/1539445X.2019.1711398.
- Ren, P. G.; Si, X. H.; Sun, Z. F.; Ren, F.; Pei, L.; Hou, S.-Y. Synergistic Effect of BN and MWCNT Hybrid Fillers on Thermal Conductivity and Thermal Stability of Ultra-high-molecular-weight Polyethylene Composites with a Segregated Structure. J. Polym. Res. 2016, 23(2), 1–11. DOI: https://doi.org/10.1007/s10965-015-0908-y.
- Huang, J.; Zhu, Y.; Xu, L.; Chen, J.; Jiang, W.; Nie, X. Massive Enhancement in the Thermal Conductivity of Polymer Composites by Trapping Graphene at the Interface of a Polymer Blend. Compos. Sci. Technol. 2016, 129, 160–165. DOI: https://doi.org/10.1016/j.compscitech.2016.04.029.
- Dai, J.; Peng, C.; Wang, F.; Zhang, G.; Huang, Z. Effects of Functionalized Graphene Nanoplatelets on the Morphology and Properties of Phenolic Resins. High Perform. Polym. 2016, 28(5), 1–7. DOI: https://doi.org/10.1177/0954008315588983.
- Ding, P.; Su, S.; Song, N.; Tang, S.; Liu, Y.; Shi, L. Highly Thermal Conductive Composites with Polyamide-6 Covalently-grafted Graphene by an in Situ Polymerization and Thermal Reduction Process. Carbon. 2014, 66(3), 576–584. DOI: https://doi.org/10.1016/j.carbon.2013.09.041.
- Shu, R.; Gan, Y.; Tan, D. Electrolytic Effects on the Rheology of Graphene Oxide Dispersions. Soft Mater. 2017, 15(1–4), 184–190. DOI: https://doi.org/10.1080/1539445X.2017.1307222.
- Zhang, W. B.; Zhang, Z. X.; Yang, J. H.; Huang, T.; Zhang, N.; Zheng, X.-T.; Wang, Y.; Zhou, Z.-W. Largely Enhanced Thermal Conductivity of Poly(vinylidene Fluoride)/carbon Nanotube Composites Achieved by Adding Graphene Oxide. Carbon 2015, 90, 242–254. DOI: https://doi.org/10.1016/j.carbon.2015.04.040.
- Yu, G. C.; Wu, L. Z.; Feng, L. J. Enhancing the Thermal Conductivity of Carbon Fiber Reinforced Polymer Composite Laminates by Coating Highly Oriented Graphite Films. Mater. Des. 2015, 88(25), 1063–1070. DOI: https://doi.org/10.1016/j.matdes.2015.09.096.
- Fu, X.; Yao, C.; Yang, G. ChemInform Abstract: Recent Advances in Graphene/Polyamide 6 Composites: A Review. Cheminform. 2015, 46(37), 61688–61702. DOI: https://doi.org/10.1002/chin.201537288.
- Li, M.; Cui, H.; Li, Q.; Zhang, Q. Thermally Conductive and Flame-retardant Polyamide 6 Composites. J. Reinf. Plast. Compos. 2015, 1–10. DOI: https://doi.org/10.1177/0731684415618538.
- Wang, C.; Hu, F.; Yang, K.; Hu, T.; Wang, W.; Deng, R.; Jiang, Q.; Zhang, H. Preparation and Properties of Nylon 6/sulfonated Graphene Composites by an in Situ Polymerization Process. RSC Adv. 2016, 6(51), 45014–45022. DOI: https://doi.org/10.1039/C6RA03017C.
- Kumar, S. S.; Kanagaraj, G. Effect of Graphite and Silicon Carbide Fillers on Mechanical Properties of PA6 Polymer Composites. J. Polymer Eng. 2017. DOI: https://doi.org/10.1515/polyeng-2015-0441.
- Zou, H.; Ning, N.; Su, R.; Zhang, Q.; Fu, Q. Manipulating the Phase Morphology in PPS/PA66 Blends Using Clay. J. Appl. Polym. Sci. 2010, 106(4), 2238–2250. DOI: https://doi.org/10.1002/app.26880.
- Oyama, H. T.; Matsushita, M.; Furuta, M. High Performance Reactive Blends Composed of Poly(p-phenylene Sulfide) and Ethylene Copolymers. Polym. J. 2011, 43(12), 991–999. DOI: https://doi.org/10.1038/pj.2011.106.