REFERENCES
- Byun , K.-S. , Kim , S.-J. , Song , J.-B. ( 2002 ). Design of a Four-Wheeled Omnidirectional Mobile Robot with Variable Wheel Arrangement Mechanism. Proc. IEEE International Conference on Robotics and Automation 720–725 .
- Ferriere , L. , Raucent , B. , Samin , J.-C. ( 1997 ). ROLLMOBS, a New Omnimobile Robot. Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems 913–918 .
- Holmberg , R. , Khatib , O. ( 2000 ). Development and control of a holonomic mobile robot for mobile manipulation tasks . The International Journal of Robotics Research 19 ( 11 ): 1066 – 1074 .
- Lee , Y.-C. ( 2005 ). Control of a reconfigurable, redundant ball wheel drive mechanism based omnidirectional mobile platform. PhD Dissertation, University of California, Davis .
- Lee , Y.-C. , Lee , D. V. , Chung , J. H. , Velinsky , S. A. ( 2007 ). Control of a redundant, reconfigurable ball wheel drive mechanism for an omnidirectional mobile platform . Robotica 25 ( 4 ): 385 – 395 .
- Moore , K. L. , Flann , N. S. ( 2000 ). A six-wheeled omnidirectional autonomous mobile robot . Control Systems Magazine, IEEE 20 ( 6 ): 53 – 66 .
- Muir , P. , Neuman , C. ( 1987 ). Kinematic modeling for feedback control of an omnidirectional wheeled mobile robot. Proc. 1987 IEEE International Conference on Robotics and Automation 1772–1778 .
- Park , T. B. , Lee , J. H. , Yi , B.-J. , Kim , W. K. , You , B. J. , Oh , S.-R. ( 2002 ). Optimal design and actuator sizing of redundantly actuated omnidirectional mobile robots. Proceedings of the IEEE International Conference on Robotics and Automation 732–737 .
- Slotine , J.-J. E. , Li , W. ( 1991 ). Applied Nonlinear Control . Englewood Cliffs , NJ : Prentice Hall .
- Tahboub , K. A. , Asada , H. H. ( 2002 ). Dynamics analysis and control of a holonomic vehicle with a continuously variable transmission . Journal of Dynamic Systems, Measurement, and Control 124 ( 1 ): 118 – 126 .
- Udengaard , M. , Iagnemma , K. ( 2008 ). Design of an omnidirectional mobile robot for rough terrain. Proceedings of the IEEE International Conference on Robotics and Automation 1666–1671 .
- Wada , W. , Mori , S. S. (1996). Holonomic and omnidirectional vehicle with conventional tires. Proc. IEEE International Conference on Robotics and Automation 3671–3676.
- West , M. , Asada , H. H. ( 1997 ). Design of ball wheel mechanisms for omnidirectional vehicles with full mobility and invariant kinematics . Journal of Mechanical Design 119 ( 2 ): 153 – 161 .
- Yu , H. , Spenko , M. , Dubowsky , S. ( 2004 ). Omni-directional mobility using active split offset castors . Journal of Mechanical Design 126 ( 5 ): 822 – 829 .
- #Communicated by B. Ravani.