An Analytical Model to Relate Shot Peening Almen Intensity to Shot Velocity

REFERENCES

• Almen , J. O. , Black , P. H. ( 1963 ). Residual Stresses and Fatigue in Metals . Toronto : McGraw-Hill .
   Google Scholar
• Baragetti , S. , Tordini , F. , ( 2011 ). Experimental and numerical study of shot peened thin hard-coated components . Mechanics Based Design of Structures and Machines: An International Journal 39 ( 3 ): 441 – 460 .
   Web of Science ®Google Scholar
• Barker , B. , Young , K. , Pouliot , L. ( 2005 ). Particle velocity sensor for improving shot peening process control . In: Schulze , V. , Niku-Larin , A. , eds. Proceedings of the 9th International Conference on Shot Peening . Paris , France : IITT International , pp. 385 – 391 .
   Google Scholar
• Ben-Dor , G. , Dubinsky , A. , Elperin , T. , ( 2010 ). Some inverse problems in penetration mechanics . Mechanics Based Design of Structures and Machines: An International Journal 38 ( 4 ): 468 – 480 .
   Web of Science ®Google Scholar
• Cao , W. , Fathallah , R. , Castex , L. , ( 1995 ). Correlation of Almen arc height with residual stresses in shot peening process . Mater. Sci. Technol. 11 : 967 – 973 .
   Web of Science ®Google Scholar
• Champaigne , J. , (2002). Almen gage calibration. In: Wagner , L. , ed. Proceedings of the 8th International Conference on Shot Peening . Garmisch-Partenkirchen , Germany : Wiley-vch, pp. 108–113.
   Google Scholar
• Drechsler , A. , Törr , T. , Wagner , L. , ( 1998 ). Mechanical surface treatments on Ti–10V–2Fe–3Al for improved fatigue resistance . Mat. Sci. Eng. A243 : 217 – 220 .
   Google Scholar
• Guagliano , M. ( 2001 ). Relating Almen intensity to residual stresses induced by shot peening: A numerical approach . J. Mater. Process. Technol. 110 : 277 – 286 .
   Web of Science ®Google Scholar
• Guechichi , H. , Castex , L. ( 2006 ). Fatigue limits prediction of surface treated materials . J. Mater. Process. Technol. 172 : 381 – 387 .
   Web of Science ®Google Scholar
• Guechichi , H. , Castex , L. , Frelat , J. , Inglebert , G. ( 1986 ). Predicting residual stress due to shot peening . In: Meguid , S. A. , ed. Impact Surface Treatment . London : Elsevier , pp. 11 – 22 .
   Google Scholar
• Hahn , G. T. , Bhargava , V. , Chen , Q. ( 1990 ). The cyclic stress-strain properties Hysteresis loop shape and kinematic hardening of two high-strength bearing steels . Metallurgical Translations A 21A : 653 – 665 .
   Web of Science ®Google Scholar
• Johnson , K. L. ( 1985 ). Contact Mechanics . Cambridge : Cambridge University Press .
   Google Scholar
• Kirk , D. ( 2009 ). Size and variability of cast steel of shot particles . The Shot Peener 23 ( 1 ): 24 – 32 .
   Google Scholar
• Kopp , R. , Schulz , J. ( 2002 ). Flexible sheet forming technology by double-sided simultaneous Shot Peen Forming . Annals of CIRP 51 ( 1 ): 195 – 198 .
   Web of Science ®Google Scholar
• Kwak , B. M. , Lee , C. W. ( 2009 ). Contact analysis by shape optimization (CASO) . Mechanics Based Design of Structures and Machines: An International Journal 37 ( 2 ): 113 – 142 .
   Web of Science ®Google Scholar
• Liu , W. C. , Dong , J. , Zhang , P. , Korsunsky , A. M. , Song , X. , Ding , W. J. ( 2011 ). Improvement of fatigue properties by shot peening for Mg-10Gd-3Y alloys under different conditions . Mater. Sci. Eng. A528 : 5935 – 5944 .
   Google Scholar
• Miao , H. Y. , Larose , S. , Perron , C. , Lévesque , M. ( 2010 ). An analytical approach to relate shot peening parameters to Almen intensity . Surf. Coat. Technol. 205 : 2055 – 2066 .
   Web of Science ®Google Scholar
• SAE J442 . ( 2008 ). Test strip. In: SAE Standards, ed. Holder and Gage for shot Peening. Warrendale, PA: Society of Automotive Engineers .
   Google Scholar
• Stevenson , A. N. J. , Hutchings , I. M. ( 1995 ). Scaling laws for particle velocity in the gas-blast erosion test. Wear 181–183:56–62 .
   Google Scholar
• Taehyung , K. , Jin Haeng , L. , Hyungyil , L. , Seong-kyun , C. ( 2010 ). An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots . Materials and Design 31 : 50 – 59 .
   Web of Science ®Google Scholar
• Wang , T. , Platts , M.J. , Levers , A. , ( 2006 ). A process model for shot peen forming . Journal of Materials Processing Technology 172 : 159 – 162 .
   Web of Science ®Google Scholar
• Wang , T. , Platts , M.J. , Wu , J. , ( 2008 ). The optimisation of shot peen forming processes . Journal of Materials Processing Technology 206 : 78 – 82 .
   Web of Science ®Google Scholar
• Zarka , J. , Engel , J. , Inglebert , G. ( 1980 ). On a simplified inelastic analysis of structures . Nucl. Eng. Des. 57 : 333 – 368 .
   Web of Science ®Google Scholar
• Zhang , P. , Lindemann , J. , ( 2005 ). Influence of shot peening on high cycle fatigue properties of the high-strength wrought magnesium alloy AZ80 . Scripta Materialia 52 : 485 – 490 .
   Web of Science ®Google Scholar
• #Communicated by Steven Velinsky.
   Google Scholar