Shaft design: A semi-analytical finite element approach

References

• Ahsan, R. U., Prachurja, P., Arm, A., Mamun, M. (2013). Determination of effect of elliptic notches and grooves on stress concentration factors on notched bar in tension and grooved shaft under torsion. Journal of Naval Architecture and Marine Engineering 10:25–32. doi:10.3329/jname.v10i1.13675sv
   Google Scholar
• Benasciutti, D., De Bona, F., Munteanu, M. (2011). A semi-analytical finite element approach in machine design of axisimmetric stuctures. In: Awrejcewicz, J., ed. Numerical Analysis- Theory and Application. Rijeka, In Tech., Rijeka (Croatia) pp. 71–96.
   Google Scholar
• Benasciutti, D., De Bona, F., Munteanu, M. (2016). A harmonic one-dimensional element for non-linear thermo-mechanical analysis of axisymmetric structures under asymmetric loads: The case of hot strip rolling. The Journal of Strain Analysis for Engineering Design 51:518–531. doi:10.1177/0309324716658415
   Web of Science ®Google Scholar
• Castagnetti, D., Dragoni, E. (2012). Concentration of torsional shear stresses in axisymmetric bars with deep periodic groove. The Journal of Strain Analysis for Engineering Design 47:66–72. doi:10.1177/0309324711435293
   Web of Science ®Google Scholar
• Cojocaru, V., Cantaragiu, A. O. (2014). Finite element analysis of stresses distributions on the shafts and the housing of a helical gear reducer. Journal of Industrial Design and Engineering Graphics 9(1):5–8.
   Google Scholar
• Cook, R. D., Malkus, D. S., Plesha, M. E. (1989). Concepts and Applications of Finite Element Analysis. New York: Wiley.
   Google Scholar
• Firat, M. (2012). A numerical analysis of combined bending–torsion fatigue of SAE notched shaft. Finite Elements in Analysis and Design 54:16–27. doi:10.1016/j.finel.2012.01.005
   Web of Science ®Google Scholar
• Genta, G., Tonoli, A. (1996). An harmonic finite element for the analysis of flexural, torsional and axial rotor dynamic behaviour of discs. Journal of Sound and Vibration 196(1):19–43. doi:10.1006/jsvi.1996.0465
   Web of Science ®Google Scholar
• Gujar, R. A., Bhaskar, S. V. (2013). Shaft design under fatigue loading by using modified Goodman method. International Journal of Engineering Research and Application 3(4):1061–1066.
   Google Scholar
• Ince, A., Glinka, G. A. (2013). A numerical method for elasto-plastic notch-root stress–strain analysis. Journal of Strain Analysis for Engineering Design 48(4):229–244. doi:10.1177/0309324713477638
   Web of Science ®Google Scholar
• Kim, J. R., Kim, W. D., Kim, S. J. (1994). Parallel computing using semi-analytical finite element method. AIAA Journal 32(5):1066–1071. doi:10.2514/3.12095
   Web of Science ®Google Scholar
• Lai, J. Y., Booker, J. R. (1991). Application of discrete Fourier series to the finite element stress analysis of axi-simmetric solids. International Journal of Numerical Methods in Engineering 31:619–647. doi:10.1002/nme.1620310402
   Web of Science ®Google Scholar
• Momcilovic, D., Odanovic, Z., Mitrovic, R., Atanasovska, I., Vuherer, T. (2012). Failure analysis of hydraulic turbine shaft. Engineering Failure Analysis 20:54–66. doi:10.1016/j.engfailanal.2011.10.006
   Web of Science ®Google Scholar
• Ooi, J. B., Wang, X., Lim, Y. P., Tan, C. S., Ho, J.-H., Wong, K.-C. (2013). Parametric optimization of the output shaft of a portal axle using Finite Element Analysis. Strojniški vestnik: Journal of Mechanical Engineering 10(59):613–619. doi:10.4028/www.scientific.net/amm.284-287.996
   Google Scholar
• Pedersen, P., Laursen, C. L. (1982). Design of minimum stress concentration by finite elements and linear programming. Journal of Structural Mechanics 10(4):375–391. doi:10.1080/03601218208907419
   Web of Science ®Google Scholar
• Rusinski, E., Harnatkiewicz, P., Bobyr, M., Yakhno, B. (2008). Caterpillar drive shaft damage causes analysis. Archives of Civil and Mechanical Engineering 8(3):117–129. doi:10.1016/s1644-9665(12)60167-8
   Web of Science ®Google Scholar
• Strozzi, A., Bertocchi, E., Baldini, A., Mantovani, S. (2016). Normalisation of the stress concentrations at the rounded edges of an interference fit between a solid shaft subjected to bending and a hub. Mechanics Based Design of Structures and Machines 44(4):405–425. doi:10.1080/15397734.2015.1086274
   Web of Science ®Google Scholar
• Tafreshi, A. (1999). SIF evaluation and stress analysis of drillstring threaded joints. International Journal of Pressure Vessels and Piping 76:91–103. doi:10.1016/s0308-0161(98)00139-2
   Web of Science ®Google Scholar
• Taiebait, H. A., Carter, J. P. A. (2001). A semi-analytical finite element methods for three dimensional consolidation analysis. Computers and Geotechnics 28:55–78. doi:10.1016/s0266-352x(00)00019-7
   Web of Science ®Google Scholar
• Vaidya, A., Yu, S. H., St Ville, J., Nguyen, D. T., Rajan, S. D. (2006). Multiphysics CAD-based design optimization. Mechanics Based Design of Structures and Machines 34(2):157–180. doi:10.1080/15397730600745807
   Google Scholar
• Wilson, E. L. (1965). Structural analysis of axisymmetric solids. AIAA Journal 3(12):2269–2274. doi:10.2514/3.3356
   Web of Science ®Google Scholar
• Zienkiewicz, O. C., Cheung, Y. K. (1967). Stresses in shaft. Stresses in shaft Nov(24) 244:696–697.
   Google Scholar
• Zienkiewicz, O. C., Taylor, R. L. (2000). The Finite Element Method. 5th ed. Oxford: Butterworth-Heinemann.
   Google Scholar