References
- Bilel, N., N. Mohamed, A. Zouhaier, and R. Lotfi. 2017. Mechatronic design optimization of the mechanism in a sewing machine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232 (4):542–56. doi:10.1177/0954406216687786.
- Boudon, B., F. Malburet, and J. C. Carmona. 2016. Simulation of a helicopter’s main gearbox semiactive suspension with bond graphs. Multibody System Dynamics 40 (4):375–405. doi:10.1007/s11044-016-9536-5.
- Budinger, M., J. Liscouët, Y. Cong, and J. C. Maré. 2009. Simulation based design of electromechanical actuators with Modelica. In ASME 2009 international design engineering technical conferences and computers and information in engineering conference. San Diego, California, USA: American Society of Mechanical Engineers. pp. 231–40.
- Budinger, M., J. Liscouët, F. Hospital, and J. C. Maré. 2012. Estimation models for the preliminary design of electromechanical actuators. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 226 (3):243–59.
- Caracciolo, R., and D. Richiedei. 2014. Optimal design of ball-screw driven servomechanisms through an integrated mechatronic approach. Mechatronics 24 (7):819–32. doi:10.1016/j.mechatronics.2014.01.004.
- Cusimano, G. 2003. A procedure for a suitable selection of laws of motion and electric drive systems under inertial loads. Mechanism and Machine Theory 38 (6):519–33. doi:10.1016/s0094-114x(03)00006-5.
- Fanghella, P., L. Bruzzone, S. Ellero, and R. Landò. 2016. Kinematics, efficiency and dynamic balancing of a planetary gear train based on nutating bevel gears. Mechanics Based Design of Structures and Machines 44 (1–2):72–85. doi:10.1080/15397734.2015.1047956.
- Gasparetto, A., P. Boscariol, A. Lanzutti, and R. Vidoni. 2012. Trajectory planning in robotics. Mathematics in Computer Science 6 (3):269–79. doi:10.1007/s11786-012-0123-8.
- Giberti, H., S. Cinquemani, and G. Legnani. 2011. A practical approach to the selection of the motor-reducer unit in electric drive systems. Mechanics Based Design of Structures and Machines 39 (3):303–19. doi:10.1080/15397734.2011.543048.
- Hehenberger, P., M. Follmer, R. Geirhofer, and K. Zeman. 2013. Model-based system design of annealing simulators. Mechatronics 23 (3):247–56. doi:10.1016/j.mechatronics.2012.12.001.
- Legnani, G., M. Tiboni, and R. Adamini. 2002. Meccanica degli azionamenti. Bologna: Esculapio. (in italian).
- Pasch, K. A., and W. P. Seering. 1984. On the drive systems for high-performance machines. Mechanical Engineering, Trans ASME 106:102–08.
- Richiedei, D., and A. Trevisani. 2016. Analytical computation of the energy-efficient optimal planning in rest-to-rest motion of constant inertia systems. Mechatronics 39:147–59. doi:10.1016/j.mechatronics.2016.05.004.
- Roos, F., H. Johansson, and J. Wikander. 2006. Optimal selection of motor and gearhead in mechatronic applications. Mechatronics 16 (1):63–72. doi:10.1016/j.mechatronics.2005.08.001.
- Roos, F., and C. Spiegelberg. 2004. Relations between size and gear ratio in spur and planetary gear trains. Technical Report TRITA-MMK 2005:01. ISSN 1400–1179, ISRN/KTH/MMK/R-05/01-SE, Publisher KTH, Stockholm, Sweden.
- Van de Straete, H. J., P. Degezelle, J. De Schutter, and R. J. Belmans. 1998. Servo motor selection criterion for mechatronic applications. IEEE/ASME Transactions on Mechatronics 3 (1):43–50. doi:10.1109/3516.662867.
- Wang, G. G., and S. Shan. 2007. Review of metamodeling techniques in support of engineering design optimization. Journal of Mechanical Design 129 (4):370–80. doi:10.1115/1.2429697.
- Zhou, L., S. Bai, and M. R. Hansen. 2011. Design optimization on the drive train of a light-weight robotic arm. Mechatronics 21 (3):560–69. doi:10.1016/j.mechatronics.2011.02.004.