References
- Abramovich, H., and O. Hamburger. 1991. Vibration of a cantilever Timoshenko beam with a tip mass. Journal of Sound and Vibration 148 (1):162–70. doi:https://doi.org/10.1016/0022-460X(91)90828-8.
- Abramovich, H., and O. Hamburger. 1992. Vibration of a uniform cantilever Timoshenko beam with translational and rotational springs and with a tip mass. Journal of Sound and Vibration 154 (1):67–80. doi:https://doi.org/10.1016/0022-460X(92)90404-L.
- Afshari, H., and M. Irani Rahaghi. 2018. Whirling analysis of multi-span multi-stepped rotating shafts. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 (9):424. doi:https://doi.org/10.1007/s40430-018-1351-x.
- Banerjee, J., and H. Su. 2006. Dynamic stiffness formulation and free vibration analysis of a spinning composite beam. Computers & Structures 84 (19–20):1208–14. doi:https://doi.org/10.1016/j.compstruc.2006.01.023.
- Behzad, M., and A. Bastami. 2004. Effect of centrifugal force on natural frequency of lateral vibration of rotating shafts. Journal of Sound and Vibration 274 (3–5):985–95. doi:https://doi.org/10.1016/S0022-460X(03)00659-X.
- Bouzidi, I., A. Hadjoui, and A. Fellah. 2020. Dynamic analysis of functionally graded rotor-blade system using the classical version of the finite element method. Mechanics Based Design of Structures and Machines. in Press. doi:https://doi.org/10.1080/15397734.2019.1706558.
- Bruch, J., and T. Mitchell, Jr. 1987. Vibrations of a mass-loaded clamped-free Timoshenko beam. Journal of Sound and Vibration 114 (2):341–5. doi:https://doi.org/10.1016/S0022-460X(87)80158-X.
- Choi, S., C. Pierre, and A. Ulsoy. 1992. Consistent modeling of rotating Timoshenko shafts subject to axial loads. Journal of Vibration and Acoustics 114 (2):249–59. doi:https://doi.org/10.1115/1.2930255.
- De Rosa, M., M. Lippiello, M. Maurizi, and H. Martin. 2010. Free vibration of elastically restrained cantilever tapered beams with concentrated viscous damping and mass. Mechanics Research Communications 37 (2):261–4. doi:https://doi.org/10.1016/j.mechrescom.2009.11.006.
- El-Mahdy, T., and R. Gadelrab. 2000. Free vibration of unidirectional fiber reinforcement composite rotor. Journal of Sound and Vibration 230 (1):195–202. doi:https://doi.org/10.1006/jsvi.1999.2573.
- Genta, G. 2007. Dynamics of rotating systems. Berlin: Springer Science & Business Media.
- Goel, R. 1976. Free vibrations of a beam-mass system with elastically restrained ends. Journal of Sound and Vibration 47 (1):9–14. doi:https://doi.org/10.1016/0022-460X(76)90404-1.
- Grant, D. 1978. The effect of rotary inertia and shear deformation on the frequency and normal mode equations of uniform beams carrying a concentrated mass. Journal of Sound and Vibration 57 (3):357–65. doi:https://doi.org/10.1016/0022-460X(78)90316-4.
- Grybos, R. 1991. The effect of shear and rotary inertia of a rotor at its critical speeds. Archive of Applied Mechanics 61 (2):104–9.
- Gu, U., and C. Cheng. 2004. Vibration analysis of a high-speed spindle under the action of a moving mass. Journal of Sound and Vibration 278 (4–5):1131–46. doi:https://doi.org/10.1016/j.jsv.2003.10.034.
- Hashemi, M., and M. Asghari. 2017. On the size-dependent flexural vibration characteristics of unbalanced couple stress-based micro-spinning beams. Mechanics Based Design of Structures and Machines 45 (1):1–11. doi:https://doi.org/10.1080/15397734.2015.1125298.
- Hosseini, S., and S. Khadem. 2009. Free vibrations analysis of a rotating shaft with nonlinearities in curvature and inertia. Mechanism and Machine Theory 44 (1):272–88. doi:https://doi.org/10.1016/j.mechmachtheory.2008.01.007.
- Hutchinson, J. 2001. Shear coefficients for Timoshenko beam theory. Journal of Applied Mechanics 68 (1):87–92. doi:https://doi.org/10.1115/1.1349417.
- Irani Rahaghi, M., A. Mohebbi, and H. Afshari. 2016. Longitudinal-torsional and two plane transverse vibrations of a composite Timoshenko rotor. Journal of Solid Mechanics 8 (2):418–34.
- Jei, Y. G., and C. W. Lee. 1992. Modal analysis of continuous asymmetrical rotor-bearing systems. Journal of Sound and Vibration 152 (2):245–62. doi:https://doi.org/10.1016/0022-460X(92)90359-6.
- Ji, J., and L. Yu. 2000. Drop dynamics of a high-speed unbalanced rotor in active magnetic bearing machinery. Mechanics Based Design of Structures and Machines 28 (2–3):185–200. doi:https://doi.org/10.1081/SME-100100617.
- Jivkov, V. S., and E. V. Zahariev. 2014. Stability and nonstationary vibrations of rotor in elastoviscous field. Mechanics Based Design of Structures and Machines 42 (1):35–55. doi:https://doi.org/10.1080/15397734.2013.814545.
- Jun, O., and J. Kim. 1999. Free bending vibration of a multi-step rotor. Journal of Sound and Vibration 224 (4):625–42.
- Kim, W., A. Argento, and R. Scott. 1999. Free vibration of a rotating tapered composite Timoshenko shaft. Journal of Sound and Vibration 226 (1):125–47.
- Laura, P., and R. Gutierrez. 1986. Vibrations of an elastically restrained cantilever beam of varying cross section with tip mass of finite length. Journal of Sound and Vibration 108 (1):123–31. doi:https://doi.org/10.1016/S0022-460X(86)80316-9.
- Laura, P., J. Pombo, and E. Susemihl. 1974. A note on the vibrations of a clamped-free beam with a mass at the free end. Journal of Sound and Vibration 37 (2):161–8. doi:https://doi.org/10.1016/S0022-460X(74)80325-1.
- Liao, H. 2019. The application of reduced space harmonic balance method for the nonlinear vibration problem in rotor dynamics. Mechanics Based Design of Structures and Machines 47 (2):154–74. doi:https://doi.org/10.1080/15397734.2018.1519634.
- Liu, W., and C. C. Huang. 1988. Free vibration of restrained beam carrying concentrated masses. Journal of Sound and Vibration 123 (1):31–42. doi:https://doi.org/10.1016/S0022-460X(88)80075-0.
- Low, K. 2003. Natural frequencies of a beam–mass system in transverse vibration: Rayleigh estimation versus eigenanalysis solutions. International Journal of Mechanical Sciences 45 (6–7):981–93. doi:https://doi.org/10.1016/j.ijmecsci.2003.09.009.
- Maiz, S., D. V. Bambill, C. A. Rossit, and P. Laura. 2007. Transverse vibration of Bernoulli–Euler beams carrying point masses and taking into account their rotatory inertia: Exact solution. Journal of Sound and Vibration 303 (3–5):895–908. doi:https://doi.org/10.1016/j.jsv.2006.12.028.
- Melanson, J., and J. Zu. 1998. Free vibration and stability analysis of internally damped rotating shafts with general boundary conditions. Journal of Vibration and Acoustics 120 (3):776–83. doi:https://doi.org/10.1115/1.2893897.
- Mohiuddin, M., and Y. Khulief. 1999. Coupled bending torsional vibration of rotors using finite element. Journal of Sound and Vibration 223 (2):297–316. doi:https://doi.org/10.1006/jsvi.1998.2095.
- Parnell, L., and M. Cobble. 1976. Lateral displacements of a vibrating cantilever beam with a concentrated mass. Journal of Sound and Vibration 44 (4):499–511. doi:https://doi.org/10.1016/0022-460X(76)90092-4.
- Raffa, F., and F. Vatta. 2001. Equations of motion of an asymmetric Timoshenko shaft. Meccanica 36 (2):201–11.
- Rao D, K., A. Swain, and T. Roy. 2020. Dynamic responses of bidirectional functionally graded rotor shaft. Mechanics Based Design of Structures and Machines. in press. doi:https://doi.org/10.1080/15397734.2020.1713804.
- Rossi, R.,. P. Laura, D. Avalos, and H. Larrondo. 1993. Free vibrations of Timoshenko beams carrying elastically mounted, concentrated masses. Journal of Sound and Vibration 165 (2):209–23. doi:https://doi.org/10.1006/jsvi.1993.1254.
- Shabaneh, N., and J. W. Zu. 2000. Dynamic analysis of rotor–shaft systems with viscoelastically supported bearings. Mechanism and Machine Theory 35 (9):1313–30. doi:https://doi.org/10.1016/S0094-114X(99)00078-6.
- Sheu, G., and S. M. Yang. 2005. Dynamic analysis of a spinning Rayleigh beam. International Journal of Mechanical Sciences 47 (2):157–69. doi:https://doi.org/10.1016/j.ijmecsci.2005.01.007.
- Sturla, F., and A. Argento. 1996. Free and forced vibrations of a spinning viscoelastic beam. Journal of Vibration and Acoustics 118 (3):463–8. doi:https://doi.org/10.1115/1.2888206.
- Torabi, K., and H. Afshari. 2016. Exact solution for whirling analysis of axial-loaded Timoshenko rotor using basic functions. Engineering Solid Mechanics 4 (2):97–108. doi:https://doi.org/10.5267/j.esm.2015.11.001.
- Torabi, K., and H. Afshari. 2018. Whirling and stability analysis of FG-rotors with variable diameter subjected to axial load and torsional torque. Amirkabir Journal of Mechanical Engineering 49 (4):269–72.
- Torabi, K., H. Afshari, and H. Najafi. 2013. Vibration analysis of multi-step Bernoulli-Euler and Timoshenko beams carrying concentrated masses. Journal of Solid Mechanics 5 (4):336–49. doi:https://doi.org/10.5267/j.esm.2013.06.002.
- Torabi, K., H. Afshari, and H. Najafi. 2017. Whirling analysis of axial-loaded multi-step Timoshenko rotor carrying concentrated masses. Journal of Solid Mechanics 9 (1):138–56.
- Torabi, K., H. Afshari, M. Sadeghi, and H. Toghian. 2017. Exact closed-form solution for vibration analysis of truncated conical and tapered beams carrying multiple concentrated masses. Journal of Solid Mechanics 9 (4):760–82.
- Torabi, K., A. Jafarzadeh Jazi, and E. Zafari. 2014. Exact closed form solution for the analysis of the transverse vibration modes of a Timoshenko beam with multiple concentrated masses. Applied Mathematics and Computation 238:342–57. doi:https://doi.org/10.1016/j.amc.2014.04.019.
- Yaman, M. 2006. Finite element vibration analysis of a partially covered cantilever beam with concentrated tip mass. Materials & Design 27 (3):243–50. doi:https://doi.org/10.1016/j.matdes.2004.10.009.