References
- Amarir, I., H. Mounir, and A. El Marjani. 2019a. Modeling the effect of welding process on the durability of welded rectangular profiles under damped loads for automotive utilization. International Journal of Mechanical and Production Engineering Research and Development 9 (1):639–48.
- Amarir, I., H. Mounir, and A. El Marjani, 2019b. Modeling the damping effect of welded rectangular profiles under damped loads for automotive utilization on the durability. 5th International Conference on Optimization and Applications, Kenitra, 1–5, IEEE. doi:https://doi.org/10.1109/ICOA.2019.8727694.
- Atzori, B., G. Blasi, and C. Pappalettere. 1985. Evaluation of fatigue strength of welded structures by local stress measurements. Experimental Mechanics 25 (2):129–39. doi:https://doi.org/10.1007/BF02328802.
- Aygül, M., M. Al-Emrani, L. Frýba, and S. Urushadze. 2010. Evaluation of the fatigue strength of an orthotropic bridge deck detail using hot spot stress approach. 63rd Annual Assembly and International Conference of the International Institute of Welding AWST-10/63, Istanbul, Turkey, 261–268.
- Casavola, C., and C. Pappalettere. 2009. Discussion on local approaches for the fatigue design of welded joints. International Journal of Fatigue 31 (1):41–9. doi:https://doi.org/10.1016/j.ijfatigue.2008.07.017.
- Demonceau, J. F., K. Weynand, J. P. Jaspart, and C. Müller. 2018. Application of Eurocode 3 to steel connections with four bolts per horizontal row. Études Romanes de Brno (2):199–206. doi:https://doi.org/10.5817/ERB2018-2-17.
- Dufour, L. C., and C. Monty. 1989. Surfaces and interfaces of ceramic materials, vol. 173. 1st ed., 806. Netherlands: Springer. doi:https://doi.org/10.1007/978-94-009-1035-5.
- Gurney, T. R., and G. O. Johnston. 1978. A revised analysis of the influence of toe defects on the fatigue strength of transverse non-load-carrying fillet welds. Research Report 62/1978/E, The Welding Institute, Cambridge.
- Hamidreza, A. R., and J. Jeong. 2007. Advanced volumetric method for fatigue life prediction using stress gradient effects at notch roots. International Journal of Computational Materials Science 39 (3):649–63. doi:https://doi.org/10.1016/j.commatsci.2006.08.017.
- Hardrath, H. F., and L. Ohman. 1951. A study of elastic and plastic stress concentration factors due to notches and fillets in flat plates. NACA Technical Reports. [S.l.] 1117: 213–22.
- Hosseini, K., M. Safarabadi, M. Ganjiani, E. Mohammadi, and A. Hosseini. 2020. Experimental and numerical fatigue life study of cracked AL plates reinforced by glass/epoxy composite patches in different stress ratios. Mechanics Based Design of Structures and Machines 1 (1):1–17. doi:https://doi.org/10.1080/15397734.2020.1714448.
- Joona, V., A. Kunnari, and T. Frondelius. 2020. Literature review of fatigue assessment methods in residual stressed state. Engineering Failure Analysis 104379 (110):2–45. doi:https://doi.org/10.1016/j.engfailanal.2020.104379.
- Lieurade, H. P., M. Truchon, and C. Maillard-Salin. 1982. Fissuration par fatigue d'assemblages soudés en acier HLE. International Association for Bridge and Structural Engineering Zurich, Switzerland, Colloquium Lausanne, 137–44.
- Marshall, P. W. 1992. Design of welded tubular connections, basis and use of aws code provisions. Amsterdam, Netherlands: Elsevier Science, 37. doi:https://doi.org/10.1016/C2009-0-12821-0.
- Nachtane, M., M. Tarfaoui, S. Sassi, A. E. Moumen, and D. Saifaoui. 2019. An investigation of hygrothermal aging effects on high strain rate behaviour of adhesively bonded composite joints. Composites Part B: Engineering 172:111–20. doi:https://doi.org/10.1016/j.compositesb.2019.05.030.
- Neuber, H. 1958. Kerbspannugslehre. 4th ed., 326. Berlin Heidelberg: Springer Verlag. doi:https://doi.org/10.1007/978-3-642-56793-3.
- Niemi, E., W. Fricke, and S. J. Maddox. 2006. Fatigue analysis of welded components: Designer′s guide to the structural hot-spot stress approach. 1st ed. Cambridge: Woodhead Publisher. doi:https://doi.org/10.1201/9781439824016.
- Nikolay, B., M. Kurki, P. Neittaanmäki, T. Saksa, M. Tirronen, and T. Tuovinen. 2013. Optimization and analysis of processes with moving materials subjected to fatigue fracture and instability. Mechanics Based Design of Structures and Machines 41 (2):146–67. doi:https://doi.org/10.1080/15397734.2012.708630.
- Niu, X., and G. Glinka. 1987. The weld profile effect on stress intensity factor in weldments. International Journal Fracture 35 (1):3–20. doi:https://doi.org/10.1007/BF00034531.
- Ohta, A., N. Suzuki, and Y. Maeda. 1997. Unique fatigue threshold and growth properties of welded joints in a tensile residual stress field. International Journal of Fatigue 19 (93):303–10. doi:https://doi.org/10.1016/S0142-1123(97)00049-2.
- Orr, S. 2008. Impeller fatigue assessment using an S-N approach. AMCA International Engineering Conference Las Vegas, NV, USA 5244-08: 2–4.
- Peterson, R. E. 1959. Notch sensitivity. In Metal fatigue, ed. G. Sines and J. L. Waisman, 293–306. New York: McGraw-Hill.
- Peterson, R. E., and R. Plunkett. 1975. Stress concentration factors. Journal of Applied Mechanics 42 (1):248. doi:https://doi.org/10.1115/1.3423544.
- Pluvinage, G. 1999. Hot spot and volumetric approaches to the high cycle fatigue of notched components. Technology, Law and Insurance 4 (1–2):145–53. doi:https://doi.org/10.1080/135993799349252.
- Pluvinage, G. 2004. Fracture and fatigue emanating from stress concentrators. 1st ed. New York: Springer Netherlands. doi:https://doi.org/10.1007/1-4020-2612-9.
- Robert, S. W., S. S. Manson, and H. H. Marvin. 1963. Fatigue behavior of materials under strain cycling in low and intermediate life range. National Aeronautics and Space Administration Cleveland OH Lewis Research Center. Technical Note D-1574.
- Sassi, S., M. Tarfaoui, and H. B. Yahia. 2018. An investigation of in-plane dynamic behavior of adhesively-bonded composite joints under dynamic compression at high strain rate. Composite Structures 191:168–79. doi:https://doi.org/10.1016/j.compstruct.2018.02.057.
- Sassi, S., M. Tarfaoui, M. Nachtane, and H. B. Yahia. 2019. Strain rate effects on the dynamic compressive response and the failure behavior of polyester matrix. Composites Part B: Engineering 174:107040. doi:https://doi.org/10.1016/j.compositesb.2019.107040.
- Shin, C. S. 1994. Fatigue crack growth from stress concentrations and fatigue life predictions in notched components. In Handbook of fatigue crack propagation in metallic structures, 613–652. Elsevier Science Publishers. doi:https://doi.org/10.1016/C2009-0-13210-5.
- Skorupa, M., H. Braam, and J. Prij. 1987. Applicability of approximate KI solutions towards cracks at weld toes. Engineering Fracture Mechanics 26 (5):669–81. doi:https://doi.org/10.1016/0013-7944(87)90132-9.
- Son, K., Y. S. Yang, K. S. Choi, and S. K. Cho. 2003. Fatigue strength evaluation on resistance spot welds of the vehicle body. Mechanics Based Design of Structures and Machines 1 (1):79–92. doi:https://doi.org/10.1081/SME-120017110.
- Tarfaoui, M., Hamitouche, and L. A. Vautrin. 2011. Numerical investigation of composite laminate delamination with cohesive elements. ICF Conference in Middle East and Africa, Egypt, 1–10. hal-00626862.
- Tavernelli, J. F., and L. F. Coffin. 1959. A compilation and interpretation of cyclic strain fatigue tests on metals. Transactions of American Society for Metals 51:438–53.
- Vinogradov, A., M. Maruyama, Y. Kaneko, and S. Hashimoto. 2012. Effect of dislocation hardening on monotonic and cyclic strength of severely deformed copper. Philosophical Magazine A 92 (6):666–89. doi:https://doi.org/10.1080/14786435.2011.630693.
- Wang, R. H., V. K. Jain, S. Mall, and V. Sabelkin. 2006. Enhancement of fretting fatigue strength through stress-relieving slot. Mechanics Based Design of Structures and Machines 34 (2):113–38. doi:https://doi.org/10.1080/15397730600640404.
- Yuehua, G., and Z. Wenzhong. 2014. Adaptive optimization with weld fatigue constraints based on surrogate model for railway vehicles. Mechanics Based Design of Structures and Machines 42 (2):244–54. doi:https://doi.org/10.1080/15397734.2013.852979.
- Zalt, A. 2012. Endommagement par fatigue et prédiction de la durée de vie des joints soudées de type caisson. PhD thesis, University of Lorraine, France.
- Zalt, A., J. Gilgert, and Z. Azari. 2011. Application of the volumetric method on welded structures. International Journal of Fatigue 33 (12):1583–91. doi:https://doi.org/10.1016/j.ijfatigue2011.07.002.
- Zedira, H., J. Gilgert, A. Boumaza, P. Jodin, Z. Azari, and G. Pluvinage. 2004. Fatigue life prediction of welded box structures. Strength of Materials 36 (6):558–64. doi:https://doi.org/10.1007/s11223-005-0002-5.
- Zhanbiao, L., D. Sante, A. William, T. Mark, B. Richard, and H. Henry. 2014. Stress and fatigue life analyses of a five-piece rim and the proposed optimization with a two-piece rim. Journal of Terramechanics 52 (2):31–45. doi:https://doi.org/10.1016/j.jterra.2014.02.002.