References
- Abouhamzeh, M., J. Sinke, and R. Benedictus. 2015. Investigation of curing effects on distortion of fibre metal laminates. Composite Structures 122:546–52. doi:https://doi.org/10.1016/j.compstruct.2014.12.019.
- Abou-Msallem, Y., H. Kassem, F. Jacquemin, and A. Poitou. 2010. Experimental study of the induced residual stresses during the manufacturing process of an aeronautic composite material. Research Journal of Applied Sciences, Engineering and Technology 2 (6):596–602.
- Akbari, D., M. Farahani, and N. Soltani. 2012. Effects of the weld groove shape and geometry on residual stresses in dissimilar butt-welded pipes. The Journal of Strain Analysis for Engineering Design 47 (2):73–82. doi:https://doi.org/10.1177/0309324711434681.
- Attia, M. A., M. A. Abd El-Baky, and A. E. Alshorbagy. 2017. Mechanical performance of intraply and inter-intraply hybrid composites based on e-glass and polypropylene unidirectional fibers. Journal of Composite Materials 51 (3):381–94. doi:https://doi.org/10.1177/0021998316644972.
- Choi, M. J., H. Cho, K. K. Choi, and S. Cho. 2015. Sampling-based RBDO of ship hull structures considering thermo-elasto-plastic residual deformation. Mechanics Based Design of Structures and Machines 43 (2):183–208. doi:https://doi.org/10.1080/15397734.2014.940463.
- Dabbagh, A., A. Rastgoo, and F. Ebrahimi. 2020. Thermal buckling analysis of agglomerated multiscale hybrid nanocomposites via a refined beam theory. Mechanics Based Design of Structures and Machines 14:1–27.
- Farahani, M., and I. Sattari-Far. 2011. Effects of residual stresses on crack-tip constraints. Scientia Iranica 18 (6):1267–76. doi:https://doi.org/10.1016/j.scient.2011.11.024.
- Farahani, M., I. Sattari-Far, D. Akbari, and R. Alderliesten. 2013. Effect of residual stresses on crack behaviour in single edge bending specimens. Fatigue & Fracture of Engineering Materials & Structures 36 (2):115–26. doi:https://doi.org/10.1111/j.1460-2695.2012.01704.x.
- Fernlund, G., N. Rahman, R. Courdji, M. Bresslauer, A. Poursartip, K. Willden, and K. Nelson. 2002. Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts. Composites Part A: Applied Science and Manufacturing 33 (3):341–51. doi:https://doi.org/10.1016/S1359-835X(01)00123-3.
- Ghabezi, P., and M. Farahani. 2017. Experimental investigation of nanoparticles effects on cohesive model and bridging laws of mode I fracture in the adhesive joints. Journal of Adhesion Science and Technology 31 (16):1807–23. doi:https://doi.org/10.1080/01694243.2017.1284639.
- Ghabezi, P., and M. Farahani. 2018. Characterization of cohesive model and bridging laws in mode I and II fracture in nano composite laminates. Journal of Mechanical Engineering and Sciences 12 (4):4329–55.
- Ghabezi, P., M. Farahani, and M. Hosseini Fakhr. 2016. Experimental investigation of nano-alumina effect on the filling time in VARTM process. Journal of Fundamental and Applied Sciences 8 (2):925–40. doi:https://doi.org/10.4314/jfas.v8i2s.146.
- Ghasemi, A. R., F. Taheri-Behrooz, and M. M. Shokrieh. 2014. Determination of non-uniform residual stresses in laminated composites using integral hole drilling method: Experimental evaluation. Journal of Composite Materials 48 (4):415–25. doi:https://doi.org/10.1177/0021998312473858.
- Jung, W. K., W. S. Chu, S. H. Ahn, and M. S. Won. 2007. Measurement and compensation of spring-back of a hybrid composite beam. Journal of Composite Materials 41 (7):851–64. doi:https://doi.org/10.1177/0021998306067064.
- Kaji, M., M. Farahani, and M. Ansari. 2017. A reinforcing technique for the adhesive bonded composite joints using metallic wires. Journal of Adhesion Science and Technology 31 (17):1963–75. doi:https://doi.org/10.1080/01694243.2017.1290573.
- Mathar, J. 1933. Determination of inherent stresses by measuring deformations of drilled holes. NACA-TM-702 report.
- Mobarakian, M., M. Safarabadi, and M. Farahani. 2020a. Developing a thermomechanical and thermochemical model for investigating the cooling rate effects on the distortion of unsymmetrical viscoelastic polymeric composite laminates. Polymer Testing under Testing 87:106503. doi:https://doi.org/10.1016/j.polymertesting.2020.106503.
- Mobarakian, M., M. Safarabadi, and M. Farahani. 2020b. Investigating the effects of cooling rate on distortion of asymmetric composite laminates. Composite Structures 236:111875. doi:https://doi.org/10.1016/j.compstruct.2020.111875.
- Nosouhi, F., M. Farahani, and M. Ansari. 2018. Experimental and numerical study on the composite adhesive joint reinforcement using wavy edge. Journal of Adhesion Science and Technology 32 (9):1007–17. doi:https://doi.org/10.1080/01694243.2017.1395578.
- Ortega, A., P. Maimí, E. V. González, J. S. de Aja, F. M. de la Escalera, and P. Cruz. 2017. Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads. Composites Science and Technology 143:1–12. doi:https://doi.org/10.1016/j.compscitech.2017.02.029.
- Paris, A. J. 2009. Bending of two-ply cord composite cylindrical shells. Mechanics Based Design of Structures and Machines 37 (3):283–98. doi:https://doi.org/10.1080/15397730902845057.
- Sabokrouh, M., and M. Farahani. 2019. Experimental study of the residual stresses in girth weld of natural gas transmission pipeline. Journal of Applied and Computational Mechanics 5 (2):199–206.
- Sam-Daliri, O., L.-M. Faller, M. Farahani, A. Roshanghias, H. Oberlercher, T. Mitterer, A. Araee, and H. Zangl. 2018. MWCNT–epoxy nanocomposite sensors for structural health monitoring. Electronics 7 (8):143. doi:https://doi.org/10.3390/electronics7080143.
- Schajer, G. S. 1981. Application of finite element calculations to residual stress measurements. Journal of Engineering Materials and Technology 103 (2):157–63. doi:https://doi.org/10.1115/1.3224988.
- Schajer, G. S. 1988a. Measurement of non-uniform residual stresses using the hole-drilling method. Part I—Stress calculation procedures. Journal of Engineering Materials and Technology 110 (4):338–43. doi:https://doi.org/10.1115/1.3226059.
- Schajer, G. S. 1988b. Measurement of non-uniform residual stresses using the hole-drilling method. Part II—practical application of the integral method. Journal of Engineering Materials and Technology 110 (4):344–9. doi:https://doi.org/10.1115/1.3226060.
- Shiau, L. C., and S. Y. Kuo. 2004. Thermal buckling of composite sandwich plates. Mechanics Based Design of Structures and Machines 32 (1):57–72. doi:https://doi.org/10.1081/SME-120026590.
- Shokrieh, M. M., and M. Safarabadi. 2012. Three-dimensional analysis of micro-residual stresses in fibrous composites based on the energy method: A study including interphase effects. Journal of Composite Materials 46 (6):727–35. doi:https://doi.org/10.1177/0021998311410478.
- Shokrieh, M. M., and S. Akbari. 2012. Application of pulse method to incremental slitting measurement of residual stresses in laminated composites. Journal of Mechanical Research and Application 4 (1):9–15.
- Shokrieh, M. M., and S. M. Kamali. 2005. Theoretical and experimental studies on residual stresses in laminated polymer composites. Journal of Composite Materials 39 (24):2213–25. doi:https://doi.org/10.1177/0021998305053511.
- Shokrieh, M. M., M. Safarabadi, and A. R. Ghaanee. 2012. A new three-dimensional analytical model to simulate microresidual stresses in polymer matrix composites. Mechanics of Composite Materials 48 (3):273–84. doi:https://doi.org/10.1007/s11029-012-9274-6.
- Tavakol, B., P. Roozbehjavan, A. Ahmed, R. Das, R. Joven, H. Koushyar, A. Rodriguez, and B. Minaie. 2013. Prediction of residual stresses and distortion in carbon fiber‐epoxy composite parts due to curing process using finite element analysis. Journal of Applied Polymer Science 128 (2):941–50. doi:https://doi.org/10.1002/app.38075.
- Wang, Q., W. Wu, and W. Li. 2018. Compression properties of interlayer and intralayer carbon/glass hybrid composites. Polymers 10 (4):343. doi:https://doi.org/10.3390/polym10040343.
- Yazdi, A. A. 2019. Nonlinear aeroelastic stability analysis of three-phase nano-composite plates. Mechanics Based Design of Structures and Machines 47 (6):753–68. doi:https://doi.org/10.1080/15397734.2019.1610436.
- Zargar, S. H., M. Farahani, and M. K. Besharati Givi. 2016. Numerical and experimental investigation on the effects of submerged arc welding sequence on the residual distortion of the fillet welded plates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230 (4):654–61. doi:https://doi.org/10.1177/0954405414560038.
- Zhang, Y., Y. Li, H. Ma, and T. Yu. 2013. Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites. Composites Science and Technology 88:172–7. doi:https://doi.org/10.1016/j.compscitech.2013.08.037.