References
- Abedian, A., M. Mondali, and M. Pahlavanpour. 2007. Basic modifications in 3D micromechanical modeling of short fiber composites with bonded and debonded fiber end. Computational Materials Science 40 (3):421–33. doi:https://doi.org/10.1016/j.commatsci.2007.01.021.
- Alizadeh, M., and A. M. Fattahi. 2019. Non-classical plate model for FGMs. Engineering with Computers 35 (1):215–28. doi:https://doi.org/10.1007/s00366-018-0594-6.
- Fattahi, A. M., E. Moaddab, and N. Bibishahrbanoei. 2015. Thermomechanical stress analysis in platelet reinforced composites with bonded and debonded platelet end. Journal of Mechanical Science and Technology 29 (5):2067–72. doi:https://doi.org/10.1007/s12206-015-0427-0.
- Fattahi, A. M., and M. Mondali. 2013. Analytical study on elastic transition in short-fiber composites for plane strain case. Journal of Mechanical Science and Technology 27 (11):3419–25. doi:https://doi.org/10.1007/s12206-013-0864-6.
- Fattahi, A. M., and M. Mondali. 2014. Theoretical study of stress transfer in platelet reinforced composites. Journal of Theoretical and Applied Mechanics 52 (1):3–14.
- Fattahi, A. M., and B. Safaei. 2017. Buckling analysis of CNT-reinforced beams with arbitrary boundary conditions. Microsystem Technologies 23 (10):5079–91. doi:https://doi.org/10.1007/s00542-017-3345-5.
- Fattahi, A. M., and S. Sahmani. 2017a. Non-local temperature-dependent postbuckling behavior of FG-CNT reinforced nanoshells under hydrostatic pressure combined with heat conduction. Microsystem Technologies 23 (10):5121–37. doi:https://doi.org/10.1007/s00542-017-3377-x.
- Fattahi, A. M., and S. Sahmani. 2017b. Size dependency in the axial postbuckling behavior of nanopanels made of functionally graded material considering surface elasticity. Arabian Journal for Science and Engineering 42 (11):4617–33. doi:https://doi.org/10.1007/s13369-017-2600-5.
- Fattahi, A. M., S. Sahmani, and N. A. Ahmed. 2020. Nonlocal strain gradient beam model for nonlinear secondary resonance analysis of functionally graded porous micro/nano-beams under periodic hard excitations. Mechanics Based Design of Structures and Machines 48 (2):403–32. doi:https://doi.org/10.1080/15397734.2019.1624176.
- Hsueh, C. H. 2000. Young’s modulus of unidirectional discontinuous-fiber composites. Composites Science and Technology. 60 (14):2671–80. doi:https://doi.org/10.1016/S0266-3538(00)00128-7.
- Jena, S. K., S. Chakraverty, M. Malikan, and F. Tornabene. 2019. Stability analysis of single-walled carbon nanotubes embedded in Winkler foundation placed in a thermal environment considering the surface effect using a new refined beam theory. Mechanics Based Design of Structures and Machines 1–15. doi:https://doi.org/10.1080/15397734.2019.1698437.
- Jiang, G., and K. Peters. 2008. A shear-lag model for three-dimensional unidirectional multilayered structures. International Journal of Solids and Structures 45 (14–15):4049–67. doi:https://doi.org/10.1016/j.ijsolstr.2008.02.018.
- Jiang, Z., X. Liu, G. Li, and J. Lian. 2004. A new analytical model for three-dimensional elastic stress field distribution in short fibre composite. Materials Science and Engineering: A 366 (2):381–96. doi:https://doi.org/10.1016/j.msea.2003.09.055.
- Kim, H. G., and L. K. Kwac. 2009. Evaluation of elastic modulus for unidirectionally aligned short fiber composites. Journal of Mechanical Science and Technology 23 (1):54–63. doi:https://doi.org/10.1007/s12206-008-0810-1.
- Kolahchi, R., and A. Cheraghbak. 2017. Agglomeration effects on the dynamic buckling of viscoelastic microplates reinforced with SWCNTs using Bolotin method. Nonlinear Dynamics 90 (1):479–92. doi:https://doi.org/10.1007/s11071-017-3676-x.
- Kolahchi, R., M. Safari, and M. Esmailpour. 2016. Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium. Composite Structures 150:255–65. doi:https://doi.org/10.1016/j.compstruct.2016.05.023.
- Parvin, S. A., N. A. Ahmed, and A. M. Fattahi. 2020. Numerical prediction of elastic properties for carbon nanotubes reinforced composites using a multi-scale method. Engineering with Computers. doi:https://doi.org/10.1007/s00366-019-00925-8.
- Pimenta, S., and P. Robinson. 2014. An analytical shear-lag model for composites with ‘brick-and-mortar’architecture considering non-linear matrix response and failure. Composites Science and Technology 104:111–24. doi:https://doi.org/10.1016/j.compscitech.2014.09.001.
- Safaei, B., N. A. Ahmed, and A. M. Fattahi. 2019. Free vibration analysis of polyethylene/CNT plates. The European Physical Journal Plus 134 (6):271. doi:https://doi.org/10.1140/epjp/i2019-12650-x.
- Safaei, B., and A. M. Fattahi. 2017. Free vibrational response of single-layered graphene sheets embedded in an elastic matrix using different non-local plate models. Mechanics 23 (5):678–87. doi:https://doi.org/10.5755/j01.mech.23.5.14883.
- Safaei, B., A. M. Fattahi, and F. Chu. 2018. Finite element study on elastic transition in platelet reinforced composites. Microsystem Technologies 24 (6):2663–71. doi:https://doi.org/10.1007/s00542-017-3651-y.
- Sahmani, S., and A. M. Fattahi. 2017a. An anisotropic calibrated non-local plate model for biaxial instability analysis of 3D metallic carbon nanosheets using molecular dynamics simulations. Materials Research Express 4 (6):065001. doi:https://doi.org/10.1088/2053-1591/aa6bc0.
- Sahmani, S., and A. M. Fattahi. 2017b. Calibration of developed non-local anisotropic shear deformable plate model for uniaxial instability of 3D metallic carbon nanosheets using MD simulations. Computer Methods in Applied Mechanics and Engineering 322:187–207. doi:https://doi.org/10.1016/j.cma.2017.04.015.
- Sahmani, S., and A. M. Fattahi. 2017c. Development an efficient calibrated nonlocal plate model for nonlinear axial instability of zirconia nanosheets using molecular dynamics simulation. Journal of Molecular Graphics & Modelling 75:20–31. doi:https://doi.org/10.1016/j.jmgm.2017.04.018.
- Sahmani, S., and A. M. Fattahi. 2017d. Imperfection sensitivity of the size-dependent nonlinear instability of axially loaded FGM nanopanels in thermal environments. Acta Mechanica 228 (11):3789–810. doi:https://doi.org/10.1007/s00707-017-1912-6.
- Sahmani, S., A. M. Fattahi, and N. A. Ahmed. 2019. Radial postbuckling of nanoscaled shells embedded in elastic foundations based on Ru's surface stress elasticity theory. Mechanics Based Design of Structures and Machines 47 (6):787–806. doi:https://doi.org/10.1080/15397734.2019.1611447.
- Shokrgozar, A., A. Ghabussi, F. Ebrahimi, M. Habibi, and H. Safarpour. 2020. Viscoelastic dynamics and static responses of a graphene nanoplatelets-reinforced composite cylindrical microshell. Mechanics Based Design of Structures and Machines. doi:https://doi.org/10.1080/15397734.2020.1719509.
- Tabatabaei, S. S., and A. M. Fattahi. 2020. A finite element method for modal analysis of FGM plates. Mechanics Based Design of Structures and Machines. doi:https://doi.org/10.1080/15397734.2020.1744004.
- Tebeta, R. T., A. M. Fattahi, and N. A. Ahmed. 2020. Experimental and numerical study on HDPE/SWCNT nanocomposite elastic properties considering the processing techniques effect. Microsystem Technologies. doi:https://doi.org/10.1007/s00542-020-04784-y.