Structural integrity assessment and optimization of control surfaces in coaxial unmanned aerial vehicles: A case study of a micro coaxial UAV

References

• Aktas, Yucel Orkut, Ugur Ozdemir, Yasin Dereli, Ahmed Farabi Tarhan, Aykut Cetin, Aslihan Vuruskan, Burak Yuksek, et al. 2016. “Rapid Prototyping of a Fixed-Wing VTOL UAV for Design Testing.” Journal of Intelligent & Robotic Systems 84 (1–4): 639–664. https://doi.org/10.1007/s10846-015-0328-6
   Web of Science ®Google Scholar
• Chang, L., X. Shen, Y. Dai, T. Wang, and L. Zhang. 2020. “Investigation on the Mechanical Properties of Topologically Optimized Cellular Structures for Sandwiched Morphing Skins.” Composite Structures 250: 112555.
   Web of Science ®Google Scholar
• Chen, R., X. Zhu, Z. Zhou, Z. Wang, and T. Zhang. 2018. “Study on the Structure Design of Solar Powered UAV.” 2018 IEEE International Conference on Prognostics and Health Management (ICPHM 2018). Seattle, WA, USA.
   Google Scholar
• Cruzatty, C., E. Sarmiento, E. Valencia, and E. Cando. 2022. “Design Methodology of a UAV Propeller Implemented in Monitoring Activities.” Materials Today Proceedings 49 (Part 1): 115–121.
   Google Scholar
• De Vivo, L., D. Tran, and F. Kuester. 2019. “Towards Design of a 3D Printable Prandtl Box-Wing Unmanned Aerial Vehicle.” IEEE Aerospace Conference Proceedings. Big Sky, MT, USA.
   Google Scholar
• Dominguez, V. H., O. Garcia-Salazar, L. Amezquita-Brooks, L. A. Reyes-Osorio, C. Santana-Delgado, and E. G. Rojo-Rodriguez. 2022. “Micro Coaxial Drone: Flight Dynamics, Simulation and Ground Testing.” Aerospace 9 (5): 245. https://doi.org/10.3390/aerospace9050245
   Web of Science ®Google Scholar
• Gonabadi, H., A. Yadav, and S. J. Bull. 2020. “The Effect of Processing Parameters on the Mechanical Characteristics of PLA Produced by a 3D FFF Printer.” The International Journal of Advanced Manufacturing Technology 111 (3–4): 695–709. https://doi.org/10.1007/s00170-020-06138-4
   Web of Science ®Google Scholar
• Gorskii, Y., P. Gavrilov, G. Nikitin, T. Pautova, and A. Tamm. 2021. “Design Optimization of Aircraft Structures Using Virtual Proving Ground.” The International Journal of Advanced Manufacturing Technology 117 (7–8): 2457–2466. https://doi.org/10.1007/s00170-021-07355-1
   Web of Science ®Google Scholar
• Graba, M., and A. Grycz. 2023. “Assessment of the Mechanical Properties of Selected PLA Filaments Used in the UAV Project.” Materials (Basel, Switzerland)16 (3): 1194. https://doi.org/10.3390/ma16031194
   PubMed Web of Science ®Google Scholar
• Harpool, T. D., I. M. Alarifi, B. A. Alshammari, A. Aabid, M. Baig, R. A. Malik, A. M. Sayed, R. Asmatulu, and T. M. A. A. El-Bagory. 2021. “Evaluation of the Infill Design on the Tensile Response of 3d Printed Polylactic Acid Polymer.” Materials (Basel, Switzerland)14 (9): 2195. https://doi.org/10.3390/ma14092195
   PubMed Web of Science ®Google Scholar
• Henderson, L., T. Glaser, and F. Kuester. 2017. “Towards Bio-Inspired Structural Design of a 3D Printable, Ballistically Deployable, Multi-Rotor UAV.” IEEE Aerospace Conference Proceedings. Big Sky, MT, USA.
   Google Scholar
• Kapsalis, S., P. Panagiotou, and K. Yakinthos. 2021. “CFD-Aided Optimization of a Tactical Blended-Wing-Body UAV Platform Using the Taguchi Method.” Aerospace Science and Technology 108: 106395.
   Web of Science ®Google Scholar
• Klippstein, H., H. Hassanin, A. Diaz De Cerio Sanchez, Y. Zweiri, and L. Seneviratne. 2018. “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications.” Advanced Engineering Materials 20 (9): 1800290. https://doi.org/10.1002/adem.201800290
   Web of Science ®Google Scholar
• Kutty, H. A., and P. Rajendran. 2017. “3D CFD Simulation and Experimental Validation of Small APC Slow Flyer Propeller Blade.” Aerospace 4 (1): 10. https://doi.org/10.3390/aerospace4010010
   Google Scholar
• Li, Z. K., J. Guo, F. M. Li, Y. D. Yan, Y. Yang, and Y. Liu. 2019. “Structure Modelling and Simulation Analysis of Six-Rotor UAV.” The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018). APISAT 2018. Lecture Notes in Electrical Engineering, 459. Singapore: Springer.
   Google Scholar
• Liu, Y., C. Chen, H. Wu, Y. Zhang, and P. Mei. 2018. “Structural Stability Analysis and Optimization of the Quadrotor Unmanned Aerial Vehicles via the Concept of Lyapunov Exponents.” The International Journal of Advanced Manufacturing Technology 94 (9–12): 3217–3227. https://doi.org/10.1007/s00170-016-9311-z
   Web of Science ®Google Scholar
• Mabbrur, M. A. M., N. P. H. El Amien, N. S. Syaifer, A. Hidayat, and S. F. Nadzir. 2020. “UAV Wing Structure with 3D Printed PLA Filament Wing Spar.” International Journal of Mechanical Engineering and Robotics Research 9 (3): 464–469.
   Google Scholar
• Nakamura, Y., A. Arakawa, K. Watanabe, and I. Nagai. 2019. “An Improvement of Flight Performance in the Level Flight of Tilted Quadrotors by Attaching a Fixed-Wing.” Artificial Life and Robotics 24: 396–403.
   Web of Science ®Google Scholar
• Negrello, F., P. Silvestri, A. Lucifredi, J. E. Guerrero, and A. Bottaro. 2016. “Preliminary Design of a Small-Sized Flapping UAV: II. Kinematic and Structural Aspects.” Meccanica 51 (6): 1369–1385. https://doi.org/10.1007/s11012-015-0309-7
   Web of Science ®Google Scholar
• Panagiotou, P., P. Kaparos, and K. Yakinthos. 2014. “Winglet Design and Optimization for a MALE UAV using CFD.” Aerospace Science and Technology 39: 190–205.
   Web of Science ®Google Scholar
• Ramteke, A. L., S. N. Waghmare, S. D. Shelare, and P. M. Sirsat. 2022. “Development of Sheet Metal Die by Using CAD and Simulation Technology to Improvement of Quality.” In: Pratap Singh, R., Tyagi, D.M., Panchal, D., Davim, J.P. (eds) Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Lecture Notes on Multidisciplinary Industrial Engineering. Cham: Springer.
   Google Scholar
• Ravindrababu, S., Y. Govdeli, Z. W. Wong, and E. Kayacan. 2018. “Evaluation of the Influence of Build and Print Orientations of Unmanned Aerial Vehicle Parts Fabricated Using Fused Deposition Modeling Process.” Journal of Manufacturing Processes 34 (Part A): 659–666.
   Google Scholar
• Saeed, A. S., A. B. Younes, C. Cai, and G. Cai. 2018. “A Survey of Hybrid Unmanned Aerial Vehicles.” Progress in Aerospace Sciences. 98: 91–105. https://doi.org/10.1016/j.paerosci.2018.03.007
   Web of Science ®Google Scholar
• Seeni, A. 2019. “Aerodynamic Performance Characterization and Static Structural Analysis of Slotted Propeller: Part A Effect of Position.” INCAS Bulletin 10 (2): 183–198.
   Google Scholar
• Shelare, S. D., K. R. Aglawe, and P. B. Khope. 2021. “Computer Aided Modeling and Finite Element Analysis of 3-D Printed Drone.” Materials Today Proceedings 47 (11): 3375–3379.
   Google Scholar
• Shelare, S. D., K. R. Aglawe, S. N. Waghmare, and P. N. Belkhode. 2021. “Advances in Water Sample Collections with a Drone—A Review.” Materials Today Proceedings 47 (14): 4490–4494.
   Google Scholar
• Shelare, S., P. Belkhode, K. C. Nikam, B. Yelamasetti, and T. Gajbhiye. 2023. “A Payload Based Detail Study on Design and Simulation of Hexacopter Drone.” International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01269-w
   Google Scholar
• Tavares, S. M. O., S. J. Moreira, P. M. S. T. De Castro, and P. V. Gamboa. 2018. “Morphing Aeronautical Structures: A Review Focused on UAVs and Durability Assessment.” Proceedings of the 2017 IEEE 4th International Conference Actual Problems of Unmanned Aerial Vehicles Developments (APUAVD 2017). Kiev, Ukraine.
   Google Scholar
• Tumino, D., G. Mantegna, C. R. Vindigni, C. Orlando, and A. Alaimo. 2024. “Additively Manufactured Lattice-Based Structures for Aeronautical Applications.” 2023 International Conference of the Italian Association of Design Methods and Tools for Industrial Engineering. Florence, Italy.
   Google Scholar
• Uddin, M. S., M. F. R. Sidek, M. A. Faizal, R. Ghomashchi, and A. Pramanik. 2017. “Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts.” Journal of Manufacturing Science and Engineering, Transactions of ASME 139 (8): 081018.
   Web of Science ®Google Scholar
• Vashi, Y., R. Anand, K. Jayakrishna, G. Rajyalakshmi, and S. A. Raj. 2021. “Design and Analysis of 3D Printed UAV Wheel. Materials Today Proceedings 46 (17): 8307–8312.
   Google Scholar
• Wach, R. A., P. Wolszczak, and A. Adamus-Wlodarczyk. 2018. “Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing.” Macromolecular Materials and Engineering 303 (9): 1800169.
   Web of Science ®Google Scholar
• Waghmare, S. N., S. D. Shelare, S. Bahl, N. Mungle, A. Kumar Bagha, and R. Chandmal Sharma. 2022. “Structural Design and Its Analysis of Two Station Notching Tool for Industrial Die.” Materials Today Proceedings 68 (Part 5): 1335–1341.
   Google Scholar
• Waghmare, S. N., S. D. Shelare, N. P. Mungle, and K. R. Aglawe. 2023. “Development of IOT-Based Hybrid Helium Drone for Flight Time Enhancement.” In: Vasudevan, H., Kottur, V.K.N., Raina, A.A. (eds) Proceedings of International Conference on Intelligent Manufacturing and Automation. Lecture Notes in Mechanical Engineering. Singapore: Springer.
   Google Scholar
• Walther, J. N., A. A. Gastaldi, R. Maierl, A. Jungo, and M. Zhang. 2020. “Integration Aspects of the Collaborative Aero-Structural Design of an Unmanned Aerial Vehicle.” CEAS Aeronautical Journal 11 (1): 217–227. https://doi.org/10.1007/s13272-019-00412-2
   Google Scholar
• Yao, T., Z. Deng, K. Zhang, and S. Li. 2019. “A Method to Predict the Ultimate Tensile Strength of 3D Printing Polylactic Acid (PLA) Materials with Different Printing Orientations. Composites, Part B: Engineering 163: 393–402.
   Web of Science ®Google Scholar
• Zhao, A., D. He, and D. Wen. 2020. “Structural design and experimental verification of a novel split aileron wing.” Aerospace Science and Technology 98: 105635.
   Web of Science ®Google Scholar
• Zhu, Z., H. Guo, and J. Ma. 2019. “Aerodynamic Layout Optimization Design of a Barrel-Launched UAV Wing Considering Control Capability of Multiple Control Surfaces.” Aerospace Science and Technology 93: 105297.
   Web of Science ®Google Scholar