Efficiency enhancement in solar air heaters by modification of absorber plate-a review

References

• Akpinar, E. K., and F. Koçyiğit. 2010a. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Applied Energy 87:3438–50.
   Web of Science ®Google Scholar
• Akpinar, E. K., and F. Koçyiğit. 2010b. Experimental investigation of thermal performance of solar air heater having different obstacles on absorber plates. International Communications in Heat and Mass Transfer 37:416–21.
   Web of Science ®Google Scholar
• Alam, T., R. P. Saini, and J. S. Saini. 2014. Experimental investigation of thermohydraulic performance of a rectangular solar air heater duct equipped with V-shaped perforated blocks. Advances in Mechanical Engineering 2014:1–11.
   Google Scholar
• Aldabbagh, L. B. Y., F. Egelioglu, and M. Ilkan. 2010. Single and double pass solar air heaters with wire mesh as packing bed. Energy 35:3783–87.
   Web of Science ®Google Scholar
• Alta, D., E. Bilgili, C. Ertekin, and O. Yaldiz. 2010. Experimental investigation of three different solar air heaters: Energy and exergy analyses. Applied Energy 87:2953–73.
   Web of Science ®Google Scholar
• Badache, M., D. Rousse, S. Hallé, G. Quesada, and Y. Dutil. 2012. Experimental and two-dimensional numerical simulation of an unglazed transpired solar air collector. Energy Procedia 30:19–28.
   Google Scholar
• Bayrak, F., H. F. Oztop, and A. Hepbasli. 2013. Energy and exergy analyses of porous baffles inserted solar air heaters for building applications. Energy and Buildings 57:338–45.
   Web of Science ®Google Scholar
• Bekele, A., M. Mishra, and S. Dutta. 2011. Effects of delta-shaped obstacles on the thermal performance of solar air heater. Advances in Mechanical Engineering 2011:1–10.
   Google Scholar
• Bharadwaj, S. S., D. Singh, and N. K. Bansal. 1981. Design and thermal performance of a matrix solar air heater. Energy Conversion and Management 21:253–56.
   Web of Science ®Google Scholar
• Bhushan, B., and R. Singh. 2011. Nusselt number and friction factor correlations for solar air heater duct having artificially roughened absorber plate. Solar Energy 85:1109–18.
   Web of Science ®Google Scholar
• Bhushan, B., and R. Singh. 2012. Thermal and thermohydraulic performance of roughened solar air heater having protruded absorber plate. Solar Energy 86:3388–96.
   Web of Science ®Google Scholar
• Chabane, F., N. Moummi, and S. Benramache. 2013. Experimental analysis on thermal performance of a solar air collector with longitudinal fins in a region of Biskra, Algeria. Journal of Power Technologies 93:52–58.
   Google Scholar
• Chabane, F., N. Moummi, and S. Benramache. 2014. Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater. Journal of Advanced Research 5:183–92.
   PubMedGoogle Scholar
• Chan, H. Y. Y., J. Zhu, and S. Riffat. 2013. Heat transfer analysis of the transpired solar facade. Energy Procedia 42:123–32.
   Google Scholar
• Chan, H. Y. Y., J. Zhu, M. H. Ruslan, K. Sopian, and S. Riffat. 2014. Thermal analysis of flat and transpired solar facades. Energy Procedia 48:1345–54.
   Google Scholar
• Chauhan, M. K., Varun, and S. Chaudhary. 2012. Performance evaluation of roughened solar air heater having M-shaped as roughness geometry on the absorber plate. International Journal of Energy and Environment 3 (6):881–94.
   Google Scholar
• Chauhan, R., and N. S. Thakur. 2014. Investigation of the thermohydraulic performance of impinging jet solar air heater. Energy 68:255–61.
   Web of Science ®Google Scholar
• Chen, Z., M. Gu, D. Peng, C. Peng, and Z. Wu. 2010. A numerical study on heat transfer of high efficient solar flat-plate collectors with energy storage. International Journal of Green Energy 7 (3):326–36.
   Web of Science ®Google Scholar
• Cortés, A., and R. Piacentini. 1990. Improvement of the efficiency of a bare solar collector by means of turbulence promoters. Applied Energy 36:253–61.
   Web of Science ®Google Scholar
• Dhiman, P., N. S. Thakur, and S. R. Chauhan. 2012. Thermal and thermohydraulic performance of counter and parallel flow packed bed solar air heaters. Renewable Energy 46:259–68.
   Web of Science ®Google Scholar
• El-Khawajah, M. F., L. B. Y. Aldabbagh, and F. Egelioglu. 2011. The effect of using transverse fins on a double pass flow solar air heater using wire mesh as an absorber. Solar Energy 85:1479–87.
   Web of Science ®Google Scholar
• El-Khawajah, M. F., F. Egelioglu, and M. Ghazal. 2015. Finned single-pass solar air heaters with wire mesh as an absorber plate. International Journal of Green Energy 12:108–16.
   Web of Science ®Google Scholar
• El-Sebaii, A. A., S. Aboul-Enein, M. R. I. Ramadan, S. M. Shalaby, and B. M. Moharram. 2011a. Investigation of thermal performance of-double pass-flat and v-corrugated plate solar air heaters. Energy 36:1076–86.
   Web of Science ®Google Scholar
• El-Sebaii, A. A., S. Aboul-Enein, M. R. I. Ramadan, S. M. Shalaby, and B. M. Moharram. 2011b. Thermal performance investigation of double pass-finned plate solar air heater. Applied Energy 88:1727–39.
   Web of Science ®Google Scholar
• El-Sebaii, A. A., and H. Al-Snani. 2010. Effect of selective coating on thermal performance of flat plate solar air heaters. Energy 35:1820–28.
   Web of Science ®Google Scholar
• Garg, H. P., and J. Prakash. 2000. Solar Energy, Fundamentals and Applications, first reprint. New Delhi, India: Tata McGraw –Hill.
   Google Scholar
• Gupta, M. K., and S. C. Kaushik. 2009. Performance evaluation of solar air heater having expanded metal mesh as artificial roughness on absorber plate. International Journal of Thermal Sciences 48:1007–16.
   Web of Science ®Google Scholar
• Hans, V. S., R. P. Saini, and J. S. Saini. 2010. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs. Solar Energy 84:898–911.
   Web of Science ®Google Scholar
• Hematian, A., and A. A. Bakhtiari. 2015. Efficiency analysis of an air solar flat plate collector in different convection modes. International Journal of Green Energy 12:881–87.
   Web of Science ®Google Scholar
• Ho, C. D., H. Chang, R.-C. Wang, and C.-S. Lin. 2012. Performance improvement of a double-pass solar air heater with fins and baffles under recycling operation. Applied Energy 100:155–63.
   Web of Science ®Google Scholar
• Karmare, S. V., and A. N. Tikekar. 2009. Experimental investigation of optimum thermohydraulic performance of solar air heaters with metal rib grits roughness. Solar Energy 83:6–13.
   Web of Science ®Google Scholar
• Karwa, R., and G. Chitoshiya. 2013. Performance study of solar air heater having v-down discrete ribs on absorber plate. Energy 55:939–55.
   Web of Science ®Google Scholar
• Kumar, R., and M. A. Rosen. 2011. Performance evaluation of a double pass PV/T solar air heater with and without fins. Applied Thermal Engineering 31:1402–10.
   Web of Science ®Google Scholar
• Labed, A., N. Moummi, A. Benchabane, K. Aoues, and A. Moummi. 2012. Performance investigation of single- and double-pass solar air heaters through the use of various fin geometries. International Journal of Sustainable Energy 31:435–435.
   Google Scholar
• Lalji, M. K., R. M. Sarviya, and J. L. Bhagoria. 2012. Exergy evaluation of packed bed solar air heater. Renewable and Sustainable Energy Reviews 16:6262–67.
   Web of Science ®Google Scholar
• Languri, E. M., H. Taherian, K. Hooman, and J. Reisel. 2011. Enhanced double-pass solar air heater with and without porous medium. International Journal of Green Energy 8:643–54.
   Web of Science ®Google Scholar
• Layek, A. 2010. Optimal thermo-hydraulic performance of solar air heater having chamfered rib-groove roughness on absorber plate. International Journal of Energy and Environment 1 (6):683–96.
   Google Scholar
• Liu, T., W. Lin, W. Gao, C. Luo, M. Li, Q. Zheng, and C. Xia. 2007b. A parametric study on the thermal performance of a solar air collector with a V-groove absorber. International Journal of Green Energy 4:601–22.
   Web of Science ®Google Scholar
• Liu, T., W. Lin, W. Gao, and C. Xia. 2007a. A comparative study of the thermal performances of cross-corrugated and v-groove solar air collectors. International Journal of Green Energy 4:427–51.
   Web of Science ®Google Scholar
• Mahboub, C., N. Moummi, A. Brima, and A. Moummi. 2016. Experimental study of new solar air heater design. International Journal of Green Energy 13 (5):521–9.
   Web of Science ®Google Scholar
• Maheshwari, B. K., R. Karwa, and S. K. Gharai. 2011. Performance study of solar air heater having absorber plate with half-perforated baffles. ISRN Renewable Energy 2011:1–13.
   Google Scholar
• Mittal, M. K., and L. Varshney. 2006. Optimal thermohydraulic performance of a wire mesh packed solar air heater. Solar Energy 80:1112–20.
   Web of Science ®Google Scholar
• Mohammadi, K., and M. Sabzpooshani. 2013. Comprehensive performance evaluation and parametric studies of single pass solar air heater with fins and baffles attached over the absorber plate. Energy 57:741–50.
   Web of Science ®Google Scholar
• Naphon, P. 2005. On the performance and entropy generation of the double-pass solar air heater with longitudinal fins. Renewable Energy 30:1345–57.
   Web of Science ®Google Scholar
• Omojaro, A. P. P., and L. B. Y. B. Y. Aldabbagh. 2010. Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber. Applied Energy 87:3759–65.
   Web of Science ®Google Scholar
• Ozgen, F., M. Esen, and H. Esen. 2009. Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans. Renewable Energy 34:2391–98.
   Web of Science ®Google Scholar
• Öztürk, H. H., and Y. Demirel. 2004. Exergy-based performance analysis of packed-bed solar air heaters. International Journal of Energy Research 28:423–32.
   Web of Science ®Google Scholar
• Prasad, S. B., J. S. Saini, and K. M. Singh. 2009. Investigation of heat transfer and friction characteristics of packed bed solar air heater using wire mesh as packing material. Solar Energy 83:773–83.
   Web of Science ®Google Scholar
• Selçuk, K. 1971. Thermal and economic analysis of the overlapped-glass plate solar-air heater. Solar Energy 13:165–91.
   Web of Science ®Google Scholar
• Sharma, M., and Varun. 2010. Performance estimation of artificially roughened solar air heater duct provided with continuous ribs. International Journal of Energy and Environment 1 (5):897–910.
   Google Scholar
• Singh, S., S. Chander, and J. S. Saini. 2011. Thermal and effective efficiency based analysis of discrete V-down rib-roughened solar air heaters. Journal of Renewable and Sustainable Energy 3:023107.
   Web of Science ®Google Scholar
• Singh Yadav, A., and M. K. Thapak. 2016. Artificially roughened solar air heater: A comparative study. International Journal of Green Energy 13 (2):143–72.
   Web of Science ®Google Scholar
• Sodha, M. S., and A. Kumar. 1984. A simple thermal model of an overlapped-glass plate solar air-heater. Energy Conversion and Management 24:287–95.
   Web of Science ®Google Scholar
• Solanki, S. C., S. Dubey, and A. Tiwari. 2009. Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors. Applied Energy 86:2421–28.
   Web of Science ®Google Scholar
• Tanda, G. 2011. Performance of solar air heater ducts with different types of ribs on the absorber plate. Energy 36:6651–60.
   Web of Science ®Google Scholar
• Tong, L. S., and A. L. London. 1957. Heat transfer and flow friction characteristics of cover screen and cross rod matrices. Trans, ASME 79:1558–70.
   Google Scholar
• Velmurugan, P., and R. Kalaivanan. 2015. Energy and exergy analysis of multi-pass flat plate solar air heater — An analytical approach. International Journal of Green Energy 12:810–20.
   Web of Science ®Google Scholar
• Waqas, A., and S. Kumar. 2013. Phase Change Material (PCM)-based solar air heating system for residential space heating in winter. International Journal of Green Energy 10:402–26.
   Web of Science ®Google Scholar
• Yeh, H.-M., and C.-D. Ho. 2013. Collector efficiency in downward-type internal-recycle solar air heaters with attached fins. Energies 6:5130–44.
   Web of Science ®Google Scholar
• Youcef-Ali, S., and J. Y. Desmons. 2005. Simulation of a new concept of an indirect solar dryer equipped with offset rectangular plate fin absorber-plate. International Journal of Energy Research 29:317–34.
   Web of Science ®Google Scholar
• Zhang, Z., R. Zuo, P. Li, and W. Su. 2009. Thermal performance of solar air collector with transparent honeycomb made of glass tube. Science in China, Series E: Technological Sciences 52:2323–29.
   Google Scholar
• Zukowski, M. 2015. Experimental investigations of thermal and flow characteristics of a novel microjet air solar heater. Applied Energy 142:10–20.
   Web of Science ®Google Scholar