Use of artificial roughness for performance enhancement of solar air heaters—a review

References

• Acharya, S., and F. Zhou. 2012. Experimental and computational study of heat/mass transfer and flow structure for four dimple shapes in a square internal passage. Journal of Turbo Machinery 134:061028. doi:10.1115/1.4006315.
   Web of Science ®Google Scholar
• Afanasyev, V. N., Y. P. Chudnovsky, A. I. Leontiev, and P. S. Roganov. 1993. Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate. Experimental Thermal and Fluid Science 7:1–8.
   Web of Science ®Google Scholar
• Aharwal, K. R., B. K. Gandhi, and J. S. Saini. 2008. Experimental investigation on heat-transfer enhancement due to a gap in an inclined continuous rib arrangement in a rectangular duct of solar air heater. Renewable Energy 33:585–96.
   Web of Science ®Google Scholar
• Aharwal, K. R., B. K. Gandhi, and J. S. Saini. 2009. Heat transfer and friction characteristics of solar air heater ducts having integral inclined discrete ribs on absorber plate. International Journal of Heat and Mass Transfer 52:5970–77.
   Web of Science ®Google Scholar
• Alam, T., and M. H. Kim. 2017. Heat transfer enhancement in solar air heater duct with conical protrusion roughness ribs. Applied Thermal Engineering 126:458–69.
   Web of Science ®Google Scholar
• Bhagoria, J. L., J. S. Saini, and S. C. Solanki. 2002. Heat transfer coefficient and friction factor correlations for rectangular solar air heater duct having transverse wedge shaped rib roughness on the absorber plate. Renewable Energy 25:341–69.
   Web of Science ®Google Scholar
• Bhatti, M. S., and R. K. Shah. 1987. Turbulent and transition flow convective heat transfer in ducts. Handbook of Single-Phase Convective Heat Transfer 4–1.
   Google Scholar
• Bhushan, B., and R. Singh. 2011. Nusselt number and friction factor correlations for solar air heater duct having artificially roughened absorber plate. Solar Energy 85:1109–18.
   Web of Science ®Google Scholar
• Bliss, R. W. 1959. The derivations of several “plate-efficiency factors” useful in the design of flat-plate solar heat collectors. Solar Energy 3:55–64.
   Web of Science ®Google Scholar
• Bopche, S. B., and M. S. Tandale. 2009. Experimental investigation on heat transfer and frictional characteristics of a tabulator roughened solar air heater duct. International Journal of Heat and Mass Transfer 52:2834–48.
   Web of Science ®Google Scholar
• Chamoli, S., R. Chauhan, N. S. Thakur, and J. S. Saini. 2012. A review of the performance of double pass solar air heater. Renewable and Sustainable Energy Reviews 16:481–92.
   Web of Science ®Google Scholar
• Chyu, M. K., Y. Yu, H. Ding, J. P. Downs, and F. O. Soechting. 1997. Concavity enhanced heat transfer in an internal cooling passage. Vol. 3. ASME International Gas Turbine and Aeroengine Congress and Exhibition V003T09A080–V003T09A080.
   Google Scholar
• Dogra, S., N. Chauhan, and G. Bhardwaj. 2013. Effect of artificial roughness on heat transfer and friction factor characteristics in rectangular duct of a double pass solar air heater. International Journal of Mechanical Engineering and Technology 4 (3):289–98.
   Google Scholar
• Duffie, J. A., and W. A. Beckman. 1980. Solar engineering of thermal processes. New York: Wiley.
   Google Scholar
• Elyyan, M. A., A. Rozati, and D. K. Tafti. 2008. Investigation of dimpled fins for heat transfer enhancement in compact heat exchangers. International Journal of Heat and Mass Transfer 51:2950–66.
   Web of Science ®Google Scholar
• Gabhane, M. K., and A. B. Kanase-Patil. 2017. Experimental analysis of double flow solar air heater with multiple C shape roughness. Solar Energy 155:1411–16.
   Web of Science ®Google Scholar
• Garg, H. P., and J. Prakash. 1997. Solar energy fundamentals and applications. New Delhi: Tata Mc Graw-Hill.
   Google Scholar
• Gilani, S. E., H. H. Al-Kayiem, and D. E. Woldemicheal. 2016. Effect of conical pin arrangement on heat transfer efficiency of a free convective solar air heater. Journal of Mechanical Engineering and Sciences 10:2053–64.
   Web of Science ®Google Scholar
• Gill, R. S., V. S. Hans, and J. S. Saini. 2015. Heat transfer and friction characteristics of solar air heater duct roughened by broken arc shaped ribs combined with staggered rib piece. International Journal of Engineering Research and Technology 4 (11):604–10.
   Google Scholar
• Gupta, D., S. C. Solanki, and J. S. Saini. 1993. Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates. Solar Energy 51:31–37.
   Web of Science ®Google Scholar
• Han, J. C., L. R. Glicksman, and W. M. Rohsenow. 1978. An investigation of heat transfer and friction for rib-roughened surfaces. International Journal of Heat and Mass Transfer 21:1143–56.
   Web of Science ®Google Scholar
• Han, J. C., and Y. M. Zhang. 1992. High performance heat transfer ducts with parallel broken and V-shaped broken ribs. International Journal of Heat and Mass Transfer 35:513–23.
   Web of Science ®Google Scholar
• Hans, V. S., R. P. Saini, and J. S. Saini. 2010. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs. Solar Energy 84:898–911.
   Web of Science ®Google Scholar
• Hwang, S. D., H. G. Kwon, and H. H. Cho. 2008. Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range. International Journal of Heat and Fluid Flow 29:916–26.
   Web of Science ®Google Scholar
• Jaurker, A. R., J. S. Saini, and B. K. Gandhi. 2006. Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness. Solar Energy 80:895–907.
   Web of Science ®Google Scholar
• Joule, J. P. 1861. On the surface condensation of steam. Philos Trans R SocLond 151:133–60.
   Google Scholar
• Karmare, S. V., and A. N. Tikekar. 2007. Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs. International Journal of Heat and Mass Transfer 50:4342–51.
   Web of Science ®Google Scholar
• Karwa, R. 2003. Experimental studies of augmented heat transfer and friction in asymmetrically heated rectangular ducts with ribs on the heated wall in transverse, inclined, v-continuous and v-discrete pattern. International Communications in Heat and Mass Transfer 30:241–50.
   Web of Science ®Google Scholar
• Karwa, R., and G. Chitoshiya. 2013. Performance study of solar air heater having v-down discrete ribs on absorber plate. Energy 55:939–55.
   Web of Science ®Google Scholar
• Karwa, R., S. C. Solanki, and J. S. Saini. 1999. Heat transfer coefficient and friction factor correlations for the transitional flow regime in rib-roughened rectangular ducts. International Journal of Heat and Mass Transfer 42:1597–615.
   Web of Science ®Google Scholar
• Kumar, A., J. L. Bhagoria, and R. M. Sarviya. 2009. Heat transfer and friction correlations for artificially roughened solar air heater duct with discrete W-shaped ribs. Energy Conversion and Management 50:2106–17.
   Web of Science ®Google Scholar
• Kumar, A., and M. H. Kim. 2015. Convective heat transfer enhancement in solar air channels. Applied Thermal Engineering 89:239–61.
   Web of Science ®Google Scholar
• Kumar, A., and M. H. Kim. 2016. Thermal Hydraulic Performance in a Solar Air Heater Channel with Multi V-Type Perforated Baffles. Energies 9:564.
   Web of Science ®Google Scholar
• Kumar, A., R. Kumar, R. Maithani, R. Chauhan, M. Sethi, A. Kumari, and S. Kumar. 2017. Correlation development for Nusselt number and friction factor of a multiple type V-pattern dimpled obstacles solar air passage. Renewable Energy 109:461–79.
   Web of Science ®Google Scholar
• Kumar, A., R. P. Saini, and J. S. Saini. 2013. Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having multi v shaped rib with gap rib as artificial roughness. Renewable Energy 58:151–63.
   Web of Science ®Google Scholar
• Kumar, K., D. R. Prajapati, and S. Samir. 2017. Heat transfer and friction factor correlations development for solar air heater duct artificially roughened with ‘S’ shape ribs”. Experimental Thermal and Fluid Science 82:249–61.
   Web of Science ®Google Scholar
• Kumar, R., V. Goel, and A. Kumar. 2018. Investigation of heat transfer augmentation and friction factor in triangular duct solar air heater due to forward facing chamfered rectangular ribs: ACFD based analysis. Renewable Energy 115:824–35.
   Web of Science ®Google Scholar
• Kumar, R., A. Kumar, R. Chauhan, and R. Maithani. 2018. Comparative study of effect of various blockage arrangements on thermalhydraulic performance in a roughened air passage. Renewable and Sustainable Energy Reviews 81:447–63.
   Web of Science ®Google Scholar
• Lanjewar, A., J. L. Bhagoria, and R. M. Sarviya. 2011. Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate. Energy 36:4531–41.
   Web of Science ®Google Scholar
• Layek, A., J. S. Saini, and S. C. Solanki. 2007. Second law optimization of a solar air heater having chamfered rib-groove roughness on absorber plate. Renewable Energy 32:1967–80.
   Web of Science ®Google Scholar
• Lewis, M. J. 1975. Optimising the thermo-hydraulic performance of rough surfaces. International Journal of Heat and Mass Transfer 18:1243–48.
   Web of Science ®Google Scholar
• Ligrani, P. M., N. K. Burgess, and S. Y. Won. 2005. Nusselt numbers and flow structure on and above a shallow dimpled surface within a channel including effects of inlet turbulence intensity level. Journal of Turbo Machinery 127(3):321–30.
   Web of Science ®Google Scholar
• Lin, Y. L., T. I. Shih, and M. K. Chyu. 1999. Computations of flow and heat transfer in a channel with rows of hemispherical cavities. Vol. 3. ASME International Gas Turbine and Aeroengine Congress and Exhibition V003T01A081–V003T01A081.
   Google Scholar
• Liou, T. M., and J. J. Hwang. 1993. Effect of ridge shapes on turbulent heat transfer and friction in a rectangular channel. International Journal of Heat and Mass Transfer 36:931–40.
   Web of Science ®Google Scholar
• Mahmood, G. I., M. L. Hill, D. L. Nelson, P. M. Ligrani, H. K. Moon, and B. Glezer. 2000. Local heat transfer and flow structure on and above a dimpled surface in a channel. ASME Turbo Expo 2000: Power for Land, Sea, and Air V003T01A038–V003T01A038.
   Google Scholar
• Mathur, A. N., and Y. C. Bhatt. 2002. Solar based energy sources in the millennium 2000. Paper presented at the All India Seminar on Advances on Solar Energy Technologies, Jodhpur, Rajasthan, India: Department. Of Mechanical Engineering, M.B.M. Engineering College, Jai Narayan Vyas University.
   Google Scholar
• Mittal, M. K., Varun, R. P. Saini, and S. K. Singal. 2007. Effective efficiency of solar air heaters having different types of roughness elements on absorber plate. Energy 32:739–45.
   Web of Science ®Google Scholar
• Momin, A. M. E., J. S. Saini, and S. C. Solanki. 2002. Heat transfer and friction in solar air heater duct with v-shaped rib roughness on absorber plate. International Journal of Heat and Mass Transfer 45:3383–96.
   Web of Science ®Google Scholar
• Moon, H. K., T. O’Connell, and B. Glezer. 1999. Channel height effect on heat transfer and friction in a dimpled passage. Vol. 3. ASME International Gas Turbine and Aeroengine Congress and Exhibition V003T01A043–V003T01A043.
   Google Scholar
• Moon, H. K., T. O’Connell, and R. Sharma. 2002. Heat transfer enhancement using a convex-patterned surface. ASME Turbo Expo 2002: Power for Land, Sea, and Air 3:887–95.
   Google Scholar
• Muluwork, K. B., J. S. Saini, and S. C. Solanki. 1998. Studies on discrete rib roughened solar air heaters. International Proceedings of national solar energy convention, Roorkee, 75–84.
   Google Scholar
• Nikuradse, J. 1958. Laws of flow in rough pipes. NACA Technical Memorandum 1292. Translation of "Stromungsgesetze in rauhen Rohren." VDI-Forschungsheft 361. Beilage zu "Forschung auf dem Gebiete des Ingenieurwesens" Ausgabe B Band 4, July/August 1933.
   Google Scholar
• Prasad, B. N., and J. S. Saini. 1988. Effect of artificial roughness on heat transfer and friction factor in a solar air heater. Solar Energy 41:555–60.
   Web of Science ®Google Scholar
• Prasad, B. N., and J. S. Saini. 1991. Optimal thermos hydraulic performance of artificially roughened solar air heaters. Solar Energy 47:91–96.
   Web of Science ®Google Scholar
• Prasad, K., and S. C. Mullick. 1983. Heat transfer characteristics of a solar air heater used for drying purposes. Applied Energy 132:83–93.
   Google Scholar
• Ravi, R. K., and R. P. Saini. 2016a. A review on different techniques used for performance enhancement of double pass solar air heaters. Renewable and Sustainable Energy Reviews 56:941–52.
   Web of Science ®Google Scholar
• Ravi, R. K., and R. P. Saini. 2016b. Experimental investigation on performance of a double pass artificial roughened solar air heater duct having roughness elements of the combination of discrete multi v shaped and staggered ribs. Energy 116:507–16.
   Web of Science ®Google Scholar
• Ravi, R. K., and R. P. Saini. 2017. Effect of roughness elements on thermal and thermo-hydraulic performance of double pass solar air heater duct having discrete multi V shaped and staggered rib roughness on both sides of the absorber plate. Experimental Heat Transfer 31:47–67.
   Web of Science ®Google Scholar
• Ravi, R. K., and R. P. Saini. 2018. Nusselt number and friction factor correlations for forced convective type counter flow solar air heater having discrete multi V shaped and staggered rib roughness on both sides of the absorber plate. Applied Thermal Engineering 129:735–46.
   Web of Science ®Google Scholar
• Ravigururajan, T. S., and A. E. Bergles. 1985a. Development and verification of general correlations for pressure drop and heat transfer in single-phase turbulent flow in enhanced tubes. Experimental Thermal and Fluid Science 13:55–70.
   Google Scholar
• Ravigururajan, T. S., and A. E. Bergles. 1985b. General correlations for pressure drop and heat transfer for single-phase turbulent flow in internally ribbed tubes. In Augmentation of heat transfer in energy systems. P.J.Bishop (Ed.), HTD-Vol. 52, ASME, New York, NY. pp. 9-20.
   Google Scholar
• Reay, D. A. 1991. Heat transfer enhancement—A review of techniques and their possible impact on energy efficiency in the UK. Heat Recovery Systems and CHP 11:1–4.
   Google Scholar
• Reddy, T. A., and C. L. Gupta. 1980. Generating application design data for solar heating systems. Solar Energy 25 (6):527–30.
   Web of Science ®Google Scholar
• Sahu, M. M., and J. L. Bhagoria. 2005. Augmentation of heat transfer coefficient by using 90° broken transverse ribs on absorber plate of solar air heater. Renewable Energy 30:2063–75.
   Web of Science ®Google Scholar
• Saini, R. P., and J. S. Saini. 1997. Heat transfer and friction factor correlations for artificially roughened ducts with expanded metal mesh as roughened element. International Journal of Heat and Mass Transfer 40:973–86.
   Web of Science ®Google Scholar
• Saini, R. P., and J. Verma. 2008. Heat transfer and friction factor correlations for a duct having dimple-shaped artificial roughness for solar air heaters. Energy 133:1277–87.
   Google Scholar
• Saini, S. K., and R. P. Saini. 2008. Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness. Solar Energy 82:1118–3110.
   Web of Science ®Google Scholar
• Schukin, A. V., A. P. Kozlov, and R. S. Agachev. 1995. Study and application of hemispheric cavities for surface heat transfer augmentation. ASME International Gas Turbine and Aeroengine Congress and Exposition 4:V004T09A034.
   Google Scholar
• Sethi, M., and N. S. Thakur. 2012. Correlations for solar air heater duct with dimpled shape roughness elements on absorber plate. Solar Energy 86:2852–61.
   Web of Science ®Google Scholar
• Sharma, A., V. Kumar, and G. Bharadwaj. 2017. Heat transfer and friction factor correlation development for double-pass solar air heater having V-shaped ribs as roughness elements. Experimental Heat Transfer 30:77–90.
   Web of Science ®Google Scholar
• Singh, S., S. Chander, and J. S. Saini. 2011. Heat transfer and friction factor correlations of solar air heater ducts artificially roughened with discrete V-down ribs. Energy 36:5053–64.
   Web of Science ®Google Scholar
• Singh, S., S. Chander, and J. S. Saini. 2012. Investigations on thermo-hydraulic performance due to flow-attack-angle in V-down rib with gap in a rectangular duct of solar air heater. Applied Energy 97:907–12.
   Web of Science ®Google Scholar
• Sparrow, E. M., and L. M. Hossfeld. 1984. Effect of rounding of protruding edges on heat transfer and pressure drop in a duct. International Journal of Heat Mass Transfer 27:1715–23.
   Web of Science ®Google Scholar
• Tanda, G. 2011. Performance of solar air heater ducts with different types of ribs on the absorber plate. Energy 36:6651–60.
   Web of Science ®Google Scholar
• Taslim, M. E., T. Li, and D. M. Kretcher. 1996. Experimental heat transfer and friction in channels roughened with angled, V-shaped and discrete ribs on two opposite walls. Trans ASME J Turbomach 118:20–28.
   Web of Science ®Google Scholar
• Varun, R. P. Saini, and S. K. Singal. 2008. Investigation of thermal performance of solar air heater having roughness elements as a combination of inclined and transverse ribs on the absorber plate. Renewable Energy 33:1398–405.
   Web of Science ®Google Scholar
• Verma, S. K., and B. N. Prasad. 2000. Investigation for the optimal thermo hydraulic performance of artificially roughened solar air heaters. Renewable Energy 20:19–36.
   Web of Science ®Google Scholar
• Webb, R. L., E. R. Eckert, and R. Goldstein. 1971. Heat transfer and friction in tubes with repeated-rib roughness. International Journal of Heat and Mass Transfer 14:601–17.
   Web of Science ®Google Scholar
• Yadav, A. S., T. S. Samant, and L. Varshney. 2015. A CFD based analysis of solar air heater having v-shaped perforated blocks on absorber plate. International Research Journal of Engineering and Technology 2 (2):822–29.
   Google Scholar
• Yadav, S., M. Kaushal, Varun, and Siddhartha. 2013. Nusselt number and friction factor correlations for solar air heater duct having protrusions as roughness elements on absorber plate. Experimental Thermal and Fluid Science 44:34–41.
   Web of Science ®Google Scholar