257
Views
5
CrossRef citations to date
0
Altmetric
Short Communications

On/off cycling test of low-temperature PEM fuel cell at fully humidified conditions

ORCID Icon, , , &
Pages 1189-1195 | Received 06 Sep 2017, Accepted 15 Sep 2019, Published online: 05 Oct 2019

References

  • Aarhaug, T. A. 2011. Assessment of PEMFC durability by effluent analysis. Trondheim: Norwegian University of Science and Technology. Ph.D. thesis, Department of Chemistry, Norwegian University of Science and Technology, Trondheim.
  • Barbir, F. 2005. PEM fuel cells: Theory and practice. Burlington: Elsevier.
  • Chen, E. 2003. Thermodynamics and electrochemical kinetics. In Fuel cell technology handbook, ed. G. Hoogers, pp. 3-I. Boca Raton: CRC Press.
  • Dhirde, A. M., N. V. Dale, H. Salehfar, M. D. Mann, and T. H. Han. 2010. Equivalent electric circuit modeling and performance analysis of a PEM fuel cell stack using impedance spectroscopy. IEEE Transactions on Energy Conversion 25 (3):778–86. doi:10.1109/TEC.2010.2049267.
  • Endoh, E. 2003. Highly durable PFSA membranes. In Handbook of fuel cells: Fundamentals, technology, applications, ed. W. Vielstich, A. Lamm, and H. A. Gasteiger, Vol. 3., 361–74. Chichester: John Wiley & Sons.
  • Fang, S., Z. Ma, H. Chen, Y. Zhang, S. Sang, and X. Liu. 2016. An equivalent circuit model of direct methanol fuel cell for polarization analysis. IEEE Transactions on Energy Conversion 31 (1):187–95. doi:10.1109/TEC.2015.2463733.
  • FCTestNet/FCTesQA. Test module PEFC SC 5-2. 2010. Testing the voltage and the power as a function of the current density. Polarisation curve for a PEFC single cell. Technical report, European Commission Joint Research Centre, Institute for Energy.
  • FCTestNet/FCTesQA. Test module PEFC SC 5-4. 2010. Testing the voltage and the power as a function of the current density following an on/off profile versus time. Accelerating ageing on/off cycling test for a PEFC single cell. Technical report, European Commission Joint Research Centre, Institute for Energy.
  • Fenton, J. M., M. P. Rodgers, D. K. Slattery, X. Huang, V. O. Mittal, L. J. Bonville, and H. R. Kunz. 2009. Membrane degradation mechanisms and accelerated durability testing of proton exchange membrane fuel cells. ECS Transactions 25 (1):233–47.
  • Garland, N. L., T. G. Benjamin, and J. P. Kopasz. 2007. DOE fuel cell program: Durability technical targets and testing protocols. ECS Transactions 11:923–31.
  • Gittleman, C. S., F. D. Coms, and Y. H. Lai. 2012. Membrane durability: Physical and chemical degradation. In Polymer electrolyte fuel cell degradation, ed. M. M. Mench, E. C. Kumbur, and T. N. Veziroglu, 15–88. Waltham: Elsevier.
  • Gode, P., F. Jaouen, G. Lindbergh, A. Lundblad, and G. Sundholm. 2003. Influence of the composition on the structure and electrochemical characteristics of the PEFC cathode. Electrochimica Acta 48 (28):4175–87. doi:10.1016/S0013-4686(03)00603-0.
  • Hacker, V., K. Mayer, M. Bodner, and A. Schenk. 2018. Methods to determine degradation in fuel cells. Proceedings of 7th Transport Research Arena TRA 2018, Vienna, Austria, April 16–19, 2018.
  • Iiyama, A., K. Shinohara, S. Iguchi, and A. Daimaru. 2003. Membrane and catalyst performance targets for automotive fuel cells. In Handbook of fuel cells: Fundamentals, technology, applications, ed. W. Vielstich, A. Lamm, and H. A. Gasteiger, Vol. 3, 905–15. Chichester: John Wiley & Sons.
  • Inaba, M., and H. Yamada. 2003. Factors influencing ionomer degradation. In Handbook of fuel cells: Fundamentals, technology, applications, ed. W. Vielstich, A. Lamm, and H. A. Gasteiger, Vol. 3, 375–84. Chichester: John Wiley & Sons.
  • Liu, W. K., S. J. C. Cleghorn, B. E. Delaney, and M. Crum. 2003. Chemical and mechanical membrane degradation. In Handbook of fuel cells: Fundamentals, technology, applications, ed. W. Vielstich, A. Lamm, and H. A. Gasteiger, Vol. 3, 385–402. Chichester: John Wiley & Sons.
  • Martin, J. J. 2012. Proton exchange membrane fuel cell testing. In PEM fuel cell diagnostic tools, ed. H. Wang, X. Z. Yuan, and H. Li, 3–13. Boca Raton: CRC Press.
  • Nemec, T., F. Marsik, and O. Mican. 2009. The characteristic thickness of polymer electrolyte membrane and the efficiency of fuel cell. Heat Transfer Engineering 30 (7):574–81. doi:10.1080/01457630802594978.
  • Perry, M. L., R. Balliet, and R. M. Darling. 2012. Experimental diagnostics and durability testing protocols. In Polymer electrolyte fuel cell degradation, ed. M. M. Mench, E. C. Kumbur, and T. N. Veziroglu, 335–64. Waltham: Elsevier.
  • Petrone, R., D. Hissel, M. C. Péra, D. Chamagne, and R. Gouriveau. 2015. Accelerated stress test procedures for PEM fuel cells under actual load constraints: State-of-art and proposals. International Journal of Hydrogen Energy 40 (36):12489–505. doi:10.1016/j.ijhydene.2015.07.026.
  • Rubio, M. A., A. Urquia, and S. Dormido. 2012. Current interruption. In PEM fuel cell diagnostic tools, ed. H. Wang, X. Z. Yuan, and H. Li, 101–27. Boca Raton: CRC Press.
  • Sanchez, D. G., R. Hiesgen, I. Wehl, and A. K. Friedrich. 2011. Correlation of oscillation of polymer electrolyte membrane fuel cells at low cathode humidification with nanoscale membrane properties. ECS Transactions 35 (32):41–54.
  • Wagner, N. 2012. Electrochemical impedance spectroscopy. In PEM fuel cell diagnostic tools, ed. H. Wang, X. Z. Yuan, and H. Li, 37–70. Boca Raton: CRC Press.
  • Wu, B., M. Zhao, W. Shi, W. Liu, J. Liu, D. Xing, Y. Yao, Z. Hou, P. Ming, J. Gu, et al. 2014. The degradation study of Nafion/PTFE composite membrane in PEM fuel cell under accelerated stress tests. International Journal of Hydrogen Energy 39 (26):14381–90. doi:10.1016/j.ijhydene.2014.02.142.
  • Wu, J., X. T. Yuan, and H. Wang. 2012. Cyclic voltammetry. In PEM fuel cell diagnostic tools, ed. H. Wang, X. Z. Yuan, and H. Li, 71–85. Boca Raton: CRC Press.
  • Wu, J., X. Z. Yuan, H. Wang, M. Blanco, J. J. Martin, and J. Zhang. 2008. Diagnostic tools in PEM fuel cell research: Part 1 electrochemical techniques. International Journal of Hydrogen Energy 33 (6):1735–46. doi:10.1016/j.ijhydene.2008.01.013.
  • Yuan, X. Z., H. Li, S. Zhang, J. Martin, and H. Wang. 2011. A review of polymer electrolyte membrane fuel cell durability test protocols. Journal of Power Sources 196 (22):9107–16. doi:10.1016/j.jpowsour.2011.07.082.
  • Yuan, X. Z., C. Song, H. Wang, and J. Zhang. 2010. Electrochemical impedance spectroscopy in PEM fuel cells: Theory and practice. London: Springer.
  • Yuan, X. Z., J. C. Sun, H. Wang, and H. Li. 2012. Accelerated conditioning for a proton exchange membrane fuel cell. Journal of Power Sources 205 (1):340–44. doi:10.1016/j.jpowsour.2012.01.039.
  • Yuan, X. Z., H. Wang, J. C. Sun, and J. Zhang. 2007. AC impedance technique in PEM fuel cell diagnosis – A review. International Journal of Hydrogen Energy 32 (17):4365–80. doi:10.1016/j.ijhydene.2007.05.036.
  • Zhang, J., H. Zhang, J. Wu, and J. Zhang. 2013. PEM fuel cell testing and diagnosis. Oxford: Elsevier.
  • Zhang, S., X. Z. Yuan, and H. Wang. 2012. Linear sweep voltammetry. In PEM fuel cell diagnostic tools, ed. H. Wang, X. Z. Yuan, and H. Li, 87–100. Boca Raton: CRC Press.
  • Zhang, S., X. Z. Yuan, H. Wang, W. Mérida, H. Zhu, J. Shen, S. Wu, and J. Zhang. 2009. A review of accelerated stress tests of MEA durability in PEM fuel cells. International Journal of Hydrogen Energy 34 (1):388–404. doi:10.1016/j.ijhydene.2008.10.012.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.