Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

References

• Al Hallaj, S., and J. R. Selman. 2000. A novel thermal management system for electric vehicle batteries using phase‐change material. Journal of the Electrochemical Society 147 (9):3231–36. doi:10.1149/1.1393888.
   Web of Science ®Google Scholar
• Arici, O., J. H. Johnson, and A. J. Kulkarni. 1999. The vehicle engine cooling system simulation part 1-model development. SAE Technical Paper.
   Google Scholar
• Bouilly, J., F. Lafossas, A. Mohammadi, and R. Van Wissen. 2015. Evaluation of fuel economy potential of an active grille shutter by the means of model based development including vehicle heat management. SAE International Journal of Engines 8 (5):2394–401. doi:10.4271/2015-24-2536.
   Web of Science ®Google Scholar
• El-Sharkawy, A. E., J. C. Kamrad, T. H. Lounsberry, G. L. Baker, and S. S. Rahman. 2011. Evaluation of impact of active grille shutter on vehicle thermal management. SAE International Journal of Materials and Manufacturing 4 (1):1244–54. doi:10.4271/2011-01-1172.
   Google Scholar
• Guo, J., A. W. Fan, X. Y. Zhang, and W. Liu. 2011. A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape. International Journal of Thermal Sciences 50 (7):1263–70. doi:10.1016/j.ijthermalsci.2011.02.010.
   Web of Science ®Google Scholar
• Hager, J., and L. Schickmair. 2005. Fuel cell vehicle thermal management system simulation in Contrast to conventional vehicle concepts. SAE Technical Paper.
   Google Scholar
• Han, J., and S. Yu. 2018. Ram air compensation analysis of fuel cell vehicle cooling system under driving modes. Applied Thermal Engineering 142:530–42. doi:10.1016/j.applthermaleng.2018.07.038.
   Web of Science ®Google Scholar
• Hu, X. J., and J. Chang. 2014. Influence of engine cabin simplification on aerodynamic characteristics of car. Advanced Materials Research 1042:188–93. doi:10.4028/www.scientific.net/AMR.1042.188.
   Google Scholar
• Huang, L. S., H. L. Zhu, and Y. R. Peng. 2018. The effect of active grille shutter for vehicle emissions and fuel consumption. Auto Sci-Tech 134(4) 32–35.
   Google Scholar
• Jarrett, A., and I. Y. Kim. 2011. Design optimization of electric vehicle battery cooling plates for thermal performance. Journal of Power Sources 196 (23):10359–68. doi:10.1016/j.jpowsour.2011.06.090.
   Web of Science ®Google Scholar
• Jia, R. Z., Y. C. Wang, J. Guo, Z. Y. Yu, and H. F. Kang. 2017. Research on the heat transfer and flow characteristics of fin-tube exchanger under low pressure environment. Applied Thermal Engineering 112:1163–71. doi:10.1016/j.applthermaleng.2016.06.137.
   Web of Science ®Google Scholar
• Khayyam, H. 2013. Adaptive intelligent control of vehicle air conditioning system. Applied Thermal Engineering 51 (1–2):1154–61. doi:10.1016/j.applthermaleng.2012.10.028.
   Web of Science ®Google Scholar
• Kim, M. S., and D. K. Kim. 2020. Parametric study on dynamic heat and mass transfer response in polymer electrolyte membrane fuel cell for automotive applications. Applied Thermal Engineering 167:114729. doi:10.1016/j.applthermaleng.2019.114729.
   Web of Science ®Google Scholar
• Lai, C. G., C. P. Yan, H. Q. Zeng, H. L. Zhang, Q. Y. Wang, and Y. T. Zhou. 2018. Multi-objective optimization design of auto air-inlet grille. Machine Tool & Hydraulics 46 (12):1–7.
   Google Scholar
• Lee, S. H., N. Hur, and S. Kang. 2014. An efficient method to predict the heat transfer performance of a louver fin radiator in an automotive power system. Journal of Mechanical Science and Technology 28 (1):145–55. doi:10.1007/s12206-013-0951-8.
   Web of Science ®Google Scholar
• Liu, L. W., J. Chang, and X. J. Hu. 2015. Numerical simulation of the influence of intake grille shape on the aerodynamic performance of a passenger Car. International Power, Electronics and Materials Engineering Conference, Dalian, Liaoning. Atlantis Press
   Google Scholar
• Marcos, D., F. J. Pino, C. Bordons, and J. J. Guerra. 2014. The development and validation of a thermal model for the cabin of a vehicle. Applied Thermal Engineering 66 (1–2):646–56. doi:10.1016/j.applthermaleng.2014.02.054.
   Web of Science ®Google Scholar
• Mustafa, R., M. Schulze, P. Eilts, F. Küçükay, T. Jaeckel, and C. Lund. 2012. Improved energy management using engine compartment encapsulation and grille shutter control. SAE International Journal of Fuels and Lubricants 5 (2):803–12. doi:10.4271/2012-01-1203.
   Google Scholar
• Patankar, S. V., and D. B. Spalding. 1974. Heat Exchanger design theory source book[M]. New York, NY: McGRAW-Hill Book Company.
   Google Scholar
• Pesaran, A. A. 2001. Battery thermal management in EV and HEVs: Issues and solutions. Battery Man 43 (5):34–49.
   Google Scholar
• Pfeifer, C. 2014. Evolution of active grille shutters. SAE Technical Paper.
   Google Scholar
• Rao, Z., S. Wang, M. Wu, Z. Lin, and F. Li. 2013. Experimental investigation on thermal management of electric vehicle battery with heat pipe. Energy Conversion and Management 65:92–97. doi:10.1016/j.enconman.2012.08.014.
   Web of Science ®Google Scholar
• Seybold, L., W. Filsinger, F. Gruber, B. Taxis, I. Lazaridis, and A. Seryi. 2016. Optimization of an engine coolant radiator for vehicle thermal management. Internationales Stuttgarter Symposium. Springer, Wiesbaden, 1465–82.
   Google Scholar
• Tang, A. K., J. F. Pan, C. W. Chen, D. T. Li, and H. Q. Yu. 2008. Optimal design of automotive radiator based on modified genetic algorithm. Journal of Jiangsu University (Natural Science Edition) 9 (5):424–27.
   Google Scholar
• Wang, T., Z. Tian, B. Gu, B. Wu, H. T. Ma, and C. Qian. 2016. Experimental study on the liquid-side characteristics of meso-channel heat exchangers in fuel cell vehicles. Applied Thermal Engineering 96:258–66. doi:10.1016/j.applthermaleng.2015.11.047.
   Web of Science ®Google Scholar
• Wang, T. T., A. Jagarwal, J. R. Wagner, and G. Fadel. 2015a. Optimization of an automotive radiator fan array operation to reduce power consumption. IEEE/ASME Transactions on Mechatronics 20 (5):2359–69. doi: 10.1109/TMECH.3516.
   Web of Science ®Google Scholar
• Wang, W. X., C. X. Wu, N. Q. Gan, X. Wang, X. Li, and Y. D. Cai. 2015b. Modeling of multi-opening control for active induction grille based on central composite design. Automotive Engineering 37 (11):1240–45.
   Google Scholar
• Wittmeier, F., and T. Kuthada. 2015. Open grille DrivAer model-first results. SAE International Journal of Passenger Cars-Mechanical Systems 8 (2015–01–1553):252–60. doi:10.4271/2015-01-1553.
   Google Scholar
• Yadav, J. P., and B. R. Singh. 2011. Study on performance evaluation of automotive radiator. S-JPSET 2 (2):47–56.
   Google Scholar
• Yu, X. Y., S. L. Gao, K. J. Wei, G. Y. Qin, and H. Gao. 2016. Research on active air intake grid technology. Popular Science & Technology 18 (3):57–59.
   Google Scholar
• Zeng, J. B. 2016. Flow structure interaction analysis of active grille shutter. Chongqing, China: Chongqing University.
   Google Scholar
• Zhang, C. H., M. Uddin, C. Robinson, L. Foster. 2018a. Full vehicle CFD investigations on the influence of front-end configuration on radiator performance and cooling drag. Applied Thermal Engineering 130:1328–40. doi: 10.1016/j.applthermaleng.2017.11.086.
   Web of Science ®Google Scholar
• Zhang, H. T., J. B. Han., Y. E. Huan, W. Hao, and Y. Wei. 2018b. Optimization analysis of intake grille layout of bus Based on CFD. Internal Combustion Engine & Power Plant 35 (1):24–28.
   Google Scholar