References
- Anyanwu, I., Z. Niu, D. Jiao, A. Najmi, Z. Liu, and K. Jiao. 2020. Liquid water transport behavior at GDL-channel interface of a wave-like channel. Energies 13 (11):2726. doi:https://doi.org/10.3390/en13112726.
- Balakrishnan, M., P. Shrestha, N. Ge, C. H. Lee, K. F. Fahy, R. Zeis, V. P. Schulz, B. D. Hatton, and A. Bazylak. 2020. Designing tailored gas diffusion layers with pore size gradients via electrospinning for polymer electrolyte membrane fuel cells. ACS Applied Energy Materials 3 (3):2695–707. doi:https://doi.org/10.1021/acsaem.9b02371.
- Büchi, F. N., and S. Srinivasan. 1997. Operating proton exchange membrane fuel cells without external humidification of the reactant gases: fundamental aspects. Journal of the Electrochemical Society 144 (8):2767–72. doi:https://doi.org/10.1149/1.1837893.
- Chun, J. H., D. H. Jo, S. G. Kim, S. H. Park, C. H. Lee, and S. H. Kim. 2012. Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks. Renewable Energy 48:35–41. doi:https://doi.org/10.1016/j.renene.2012.04.011.
- Cindrella, L., A. M. Kannan, J. F. Lin, K. Saminathan, Y. Ho, C. W. Lin, and J. Wertz. 2009. Gas diffusion layer for proton exchange membrane fuel cells—A review. Journal of Power Sources 194 (1):146–60. doi:https://doi.org/10.1016/j.jpowsour.2009.04.005.
- Deng, H., Y. Hou, and K. Jiao. 2019. Lattice Boltzmann simulation of liquid water transport inside and at interface of gas diffusion and micro-porous layers of PEM fuel cells. International Journal of Heat and Mass Transfer 140:1074–90. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.05.097.
- Devrim, Y., S. Erkan, N. Bac, and I. Eroglu. 2012. Improvement of PEMFC performance with Nafion/inorganic nanocomposite membrane electrode assembly prepared by ultrasonic coating technique. International Journal of Hydrogen Energy 37 (21):16748–58. doi:https://doi.org/10.1016/j.ijhydene.2012.02.148.
- Hizir, F. E., S. O. Ural, E. C. Kumbur, and M. M. Mench. 2010. Characterization of interfacial morphology in polymer electrolyte fuel cells: Micro-porous layer and catalyst layer surfaces. Journal of Power Sources 195 (11):3463–71. doi:https://doi.org/10.1016/j.jpowsour.2009.11.032.
- Jienkulsawad, P., Y.-S. Chen, and A. Arpornwichanop. 2020. Modifying the catalyst layer using polyvinyl alcohol for the performance improvement of proton exchange membrane fuel cells under low humidity operations. Polymers 12 (9):1865. doi:https://doi.org/10.3390/polym12091865.
- Jinuntuya, F., and W. Kamsanam. 2020. Effects of a microporous layer on water transport BEhaviour in PEM fuel cell gas diffusion layers. IOP Conference Series: Materials Science and Engineering 886:012043. doi:https://doi.org/10.1088/1757-899X/886/1/012043.
- Khandelwal, M., and M. Mench. 2006. Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials. Journal of Power Sources 161 (2):1106–15. doi:https://doi.org/10.1016/j.jpowsour.2006.06.092.
- Kitahara, T., H. Nakajima, M. Inamoto, and K. Shinto. 2014. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions. Journal of Power Sources 248:1256–63. doi:https://doi.org/10.1016/j.jpowsour.2013.10.066.
- Kitahara, T., H. Nakajima, and K. Okamura. 2015. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions. Journal of Power Sources 283:115–24. doi:https://doi.org/10.1016/j.jpowsour.2015.02.115.
- Kong, I. M., A. Jung, and M. S. Kim. 2016. Investigations on the double gas diffusion backing layer for performance improvement of self-humidified proton exchange membrane fuel cells. Applied Energy 176:149–56. doi:https://doi.org/10.1016/j.apenergy.2016.05.057.
- Lee, S. Y., J. E. Chae, J. Choi, H. S. Park, D. Henkensmeier, S. J. Yoo, J. Y. Kim, Y. Na, J. H. Jang, and H.-J. Kim. 2020. Dual exchange membrane fuel cell with sequentially aligned cation and anion exchange membranes for non-humidified operation. Journal of Membrane Science 596:117745. doi:https://doi.org/10.1016/j.memsci.2019.117745.
- Lu, Z., M. Daino, C. Rath, and S. Kandlikar. 2010. Water management studies in PEM fuel cells, part III: Dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs. International Journal of Hydrogen Energy 35 (9):4222–33. doi:https://doi.org/10.1016/j.ijhydene.2010.01.012.
- Markötter, H., J. Haußmann, R. Alink, C. Tötzke, T. Arlt, M. Klages, H. Riesemeier, J. Scholtab, D. Gerteisen, J. Banhart, et al. 2013. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography. Electrochemistry Communications 34:22–24. doi:https://doi.org/10.1016/j.elecom.2013.04.006.
- Mekhilef, S., R. Saidur, and A. Safari. 2012. Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews 16 (1):981–89. doi:https://doi.org/10.1016/j.rser.2011.09.020.
- Niu, Z., Z. Bao, J. Wu, Y. Wang, and K. Jiao. 2018b. Two-phase flow in the mixed-wettability gas diffusion layer of proton exchange membrane fuel cells. Applied Energy 232:443–50. doi:https://doi.org/10.1016/j.apenergy.2018.09.209.
- Niu, Z., Y. Wang, K. Jiao, and J. Wu. 2018a. Two-phase flow dynamics in the gas diffusion layer of proton exchange membrane fuel cells: volume of fluid modeling and comparison with experiment. Journal of the Electrochemical Society 165 (9):F613–F620. doi:https://doi.org/10.1149/2.0261809jes.
- Park, C., S. Lee, D. Hwang, D. Shin, D. Cho, K. Lee, T. Kim, T. Kim, M. Lee, D. Kim, et al. 2016. Nanocrack-regulated self-humidifying membranes. Nature 532 (7600):480–83. doi:https://doi.org/10.1038/nature17634.
- Park, S., J. Lee, and B. N. Popov. 2012. A review of gas diffusion layer in PEM fuel cells: Materials and designs. International Journal of Hydrogen Energy 37 (7):5850–65. doi:https://doi.org/10.1016/j.ijhydene.2011.12.148.
- Shan, J., R. Lin, X. Chen, and X. Diao. 2018. EIS and local resolved current density distribution analysis on effects of MPL on PEMFC performance at varied humidification. International Journal of Heat and Mass Transfer 127:1076–83. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2018.08.033.
- Shrestha, P., R. Banerjee, J. Lee, N. Ge, D. Muirhead, H. Liu, A. K. C. Wong, D. Ouellette, B. Zhao, and A. Bazylak. 2018. Hydrophilic microporous layer coatings for polymer electrolyte membrane fuel cells operating without anode humidification. Journal of Power Sources 402:468–82. doi:https://doi.org/10.1016/j.jpowsour.2018.08.062.
- Staffell, I., D. Scamman, A. V. Abad, P. Balcombe, P. E. Dodds, P. Ekins, N. Shah, and K. R. Ward. 2019. The role of hydrogen and fuel cells in the global energy system. Energy & Environmental Science 12:463–91. doi:https://doi.org/10.1039/C8EE01157E.
- Tanuma, T., M. Kawamoto, and S. Kinoshita. 2017. Effect of properties of hydrophilic microporous layer (MPL) on PEFC performance. Journal of the Electrochemical Society 164:F499–F503. doi:https://doi.org/10.1149/2.0371706jes.
- Wang, X., Z. Qu, G. Ren, C. Feng, and F. Cheng. 2020. Prolonged yield platform in bioinspired three dimensional carbon materials derived from crack deflection. Materials Letters 270:127759. doi:https://doi.org/10.1016/j.matlet.2020.127759.
- Wang, X., Y. Su, S. Han, M. Crimp, Y. Wang, and Y. Wang. 2021. Elastic recovery induced strengthening effect in copper/multilayer-graphene interface regions revealed by instrumental nanoindentation. Composites Part B: Engineering 108832 doi:https://doi.org/10.1016/j.compositesb.2021.108832.
- Williams, M. V., H. R. Kunz, and J. M. Fenton. 2004. Operation of Nafion ®-based PEM fuel cells with no external humidification: Influence of operating conditions and gas diffusion layers. Journal of Power Sources 135 (1):122–34. doi:https://doi.org/10.1016/j.jpowsour.2004.04.010.
- Xie, X., R. Wang, K. Jiao, G. Zhang, J. Zhou, and Q. Du. 2018. Investigation of the effect of micro-porous layer on PEM fuel cell cold start operation. Renewable Energy 117:125–34. doi:https://doi.org/10.1016/j.renene.2017.10.039.
- Yin, Y., J. Liu, Y. Chang, Y. Zhu, X. Xie, Y. Qin, J. Zhang, K. Jiao, Q. Du, and M. D. Guiver. 2019. Design of Pt-C/Fe-N-S-C cathode dual catalyst layers for proton exchange membrane fuel cells under low humidity. Electrochimica Acta 296:450–57. doi:https://doi.org/10.1016/j.electacta.2018.11.048.
- Zhang, G., L. Fan, J. Sun, and K. Jiao. 2017. A 3D model of PEMFC considering detailed multiphase flow and anisotropic transport properties. International Journal of Heat and Mass Transfer 115:714–24. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.102.
- Zhang, Q., Z. Tong, S. Tong, and Z. Cheng. 2021. Self-humidifying effect of air self-circulation system for proton exchange membrane fuel cell engines. Renewable Energy 164:1143–55. doi:https://doi.org/10.1016/j.renene.2020.10.105.
- Zhou, X., Z. Niu, Z. Bao, J. Wang, Z. Liu, Y. Yin, Q. Du, and K. Jiao. 2019b. Two-phase flow in compressed gas diffusion layer: Finite element and volume of fluid modeling. Journal of Power Sources 437:226933. doi:https://doi.org/10.1016/j.jpowsour.2019.226933.
- Zhou, X., Z. Niu, Y. Li, X. Sun, Q. Du, J. Xuan, and K. Jiao. 2019a. Investigation of two-phase flow in the compressed gas diffusion layer microstructures. International Journal of Hydrogen Energy 44:26498–516. doi:https://doi.org/10.1016/j.ijhydene.2019.08.108.
- Zhou, X., L. Wu, Z. Niu, Z. Bao, X. Sun, Z. Liu, Y. Li, K. Jiao, Z. Liu, and Q. Du. 2020. Effects of surface wettability on two-phase flow in the compressed gas diffusion layer microstructures. International Journal of Heat and Mass Transfer 151:119370. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2020.119370.