The Influences of Fibre Parameters on the Tensile and Flexural Response of Lightweight Thermoplastic Kenaf Fibre Reinforced Metal Composites

References

• Abilash, N., and M. Sivapragash. 2016. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. Journal of King Saud University - Engineering Sciences 28:92–102. doi:10.1016/j.jksues.2013.09.004.
   Google Scholar
• Alderliesten, R. 2009. On the development of hybrid material concepts for aircraft structures. Recent Patents on Engineering 3:25–38. doi:10.2174/187221209787259893.
   Google Scholar
• Asgarinia, S., C. Viriyasuthee, S. Phillips, M. Dube, J. Baets, A. V. Vuure, I. Verpoest, and L. Lessard. 2015. Tension–Tension fatigue behaviour of woven flax/epoxy composites. Journal of Reinforced Plastics and Composites 34:857–67. doi:10.1177/0731684415581527.
   Web of Science ®Google Scholar
• Asim, M., M. Jawaid, K. Abdan, and M. R. Ishak. 2016. Effect of alkali and silane treatments on mechanical and fibre-matrix bond strength of kenaf and pineapple leaf fibres. Journal of Bionic Engineering 13:426–35. doi:10.1016/S1672-6529(16)60315-3.
   Web of Science ®Google Scholar
• Asumani, O. M. L., R. G. Reid, and R. Paskaramoorthy. 2012. The effects of alkali-silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites. Composites Part A: Applied Science and Manufacturing 43:1431–40. doi:10.1016/j.compositesa.2012.04.007.
   Web of Science ®Google Scholar
• Carrillo, J. G., and W. J. Cantwell. 2009. Mechanical properties of a novel fiber-metal laminate based on a polypropylene composite. Mechanics of Materials 41:828–38. doi:10.1016/j.mechmat.2009.03.002.
   Web of Science ®Google Scholar
• Chai, G. B., and P. Manikandan. 2014. Low velocity impact response of fibre-metal laminates – a review. Composite Structures 107:363–81. doi:10.1016/j.compstruct.2013.08.003.
   Web of Science ®Google Scholar
• Chen, P., C. Lu, Q. Yu, Y. Gao, J. Li, and X. Li. 2006. Influence of fiber wettability on the interfacial adhesion of continuous fiber-reinforced PPESK composite. Journal of Applied Polymer Science 102:2544–51. doi:10.1002/(ISSN)1097-4628.
   Web of Science ®Google Scholar
• Daud, M. A. M., M. Z. Omar, J. Syarif, and Z. Sajuri. 2010. Effect of wire-EDM cutting on fatigue strength of AZ61 magnesium alloy. Jurnal Mekanikal 30:68–76.
   Google Scholar
• Davies, P., and W. J. Cantwell. 1994. Fracture of glass/polypropylene laminates: Influence of cooling rate after moulding. Composites 25:869–77. doi:10.1016/0010-4361(94)90028-0.
   Google Scholar
• De, D., B. Adhikari, and D. De. 2007. Grass fiber reinforced phenol formaldehyde resin composite: Preparation, characterization and evaluation of properties of composite. Polymers for Advanced Technologies 18:72–81. doi:10.1002/(ISSN)1099-1581.
   Web of Science ®Google Scholar
• DharMalingam, S., M. Z. Sivaraos, S. R. Said, and S. Kalyanasundaram. 2014. Effects of process parameters during forming of glass reinforced-PP based sandwich structure. Advances in Environmental Biology 8:3143–50.
   Google Scholar
• Ding, Y., J. Wang, M. Zhao, and D. Ju. 2018. Effect of annealing temperature on joints of diffusion bonded mg/al alloys. Transactions Of Nonferrous Metals Society Of China 28:251-8. doi: 10.1016/S1003-6326(18)64658-8.
   Web of Science ®Google Scholar
• Edeerozey, A. M., H. M. Akil, A. Azhar, and M. Z. Ariffin. 2007. Chemical modification of kenaf fibers. Materials Letters 61:2023–25. doi:10.1016/j.matlet.2006.08.006.
   Web of Science ®Google Scholar
• El-Shekeil, Y. A., S. M. Sapuan, A. Khalina, E. S. Zainudin, and O. M. Al-Shuja’A. 2012. Effect of alkali treatment on mechanical and thermal properties of kenaf fiber-reinforced thermoplastic polyurethane composite. Journal of Thermal Analysis and Calorimetry 109:1435–43. doi:10.1007/s10973-012-2258-x.
   Web of Science ®Google Scholar
• Feng, N. L., S. DharMalingam, K. A. Zakaria, and M. Z. Selamat. 2017. Investigation on the fatigue life characteristic of kenaf/glass woven-ply reinforced metal sandwich materials. Journal of Sandwich Structures & Materials. doi:10.1177/1099636217729910.
   Web of Science ®Google Scholar
• Ferrante, L., S. Sarasini, J. Tirillo, L. Lampani, T. Valente, and P. Gaudenzi. 2016. Low velocity impact response of basalt-aluminium fibre metal laminates. Materials and Design 98:98–107. doi:10.1016/j.matdes.2016.03.002.
   Web of Science ®Google Scholar
• Hamill, L., D. C. Hofmann, and S. Nutt. 2017. Galvanic corrosion and mechanical behavior of fiber metal laminates of metallic glass and carbon fiber composites. Advanced Engineering Materials 20:1–8.
   Web of Science ®Google Scholar
• Helms, H., and U. Lambrecht. 2003. Energy savings by lightweighting. Heidelberg: IFEU-Institute for Energy and Environmental Research.
   Google Scholar
• Hemsri, S., K. Grieco, A. D. Asandei, and R. S. Parnas. 2012. Wheat gluten composites reinforced with coconut fiber. Composites Part A: Applied Science and Manufacturing 43:1160–68. doi:10.1016/j.compositesa.2012.02.011.
   Web of Science ®Google Scholar
• Hossain, S. I., M. Hasan, N. Hasan, and A. Hassan. 2013. Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber. Advances in materials science and engineering, 2013:1–6. doi:10.1155/2013/824274.
   Google Scholar
• Hu, Y. B., H. G. Li, L. Cai, J. P. Zhu, L. Pan, J. Xu, and J. Tao. 2015. Preparation and properties of fibre-metal laminates based on carbon fibre reinforced PMR polyimide. Composites Part B: Engineering 69:587–91. doi:10.1016/j.compositesb.2014.11.011.
   Web of Science ®Google Scholar
• Islam, M. R., M. D. H. Beg, and A. Gupta. 2014. Characterization of alkali-treated kenaf fibre-reinforced recycled polypropylene composites. Journal of Thermoplastic Composite Materials 27:909–32. doi:10.1177/0892705712461511.
   Web of Science ®Google Scholar
• Kaboglu, C., I. Mohagheghian, J. Zhou, Z. Guan, W. Cantwell, S. John, B. R. K. Blackman, A. J. Kinloch, and J. P. Dear. 2018. High-velocity impact deformation and perforation of fibre metal laminates. Journal of Materials Science 53:4209–28. doi:10.1007/s10853-017-1871-2.
   Web of Science ®Google Scholar
• Khan, S. U., R. C. Alderliesten, and R. Benedictus. 2009. Delamination growth in fibre metal laminates under variable amplitude loading. Composites Science and Technology 69:2604–15. doi:10.1016/j.compscitech.2009.07.019.
   Web of Science ®Google Scholar
• Kuan, H. T. N., W. J. Cantwell, M. A. Hazizan, and C. Santulli. 2011. The fracture properties of environmental-friendly fiber metal laminates. Journal of Reinforced Plastics and Composites 30:499–508. doi:10.1177/0731684411398536.
   Web of Science ®Google Scholar
• Kushwaha, P. K., and R. Kumar. 2010. Studies on water absorption of bamboo-polyester composites: Effect of silane treatment of mercerized bamboo. Polymer-Plastics Technology and Engineering 49:45–52. doi:10.1080/03602550903283026.
   Web of Science ®Google Scholar
• Lee, K., P. Bharadia, J. J. Blaker, and A. Bismarck. 2012. Short sisal fibre reinforced bacterial cellulose polylactide nanocomposites using hairy sisal fibres as reinforcement. Composites Part A: Applied Science and Manufacturing 43:2065–74. doi:10.1016/j.compositesa.2012.06.013.
   Web of Science ®Google Scholar
• Li, X., L. G. Tabil, and S. Panigrahi. 2007. Chemical treatments of natural fiber for use in natural fiber-reinforced composites. Journal of Polymers and the Environment 15:25–33. doi:10.1007/s10924-006-0042-3.
   Web of Science ®Google Scholar
• Morovvati, M.R., and B.M. Dariani. 2017. The effect of annealing on the formability of aluminum 1200 after accumulative roll bonding. Journal Of Manufacturing Processes 30:241-54. doi: 10.1016/j.jmapro.2017.09.013.
   Web of Science ®Google Scholar
• Moussavi-Torshizi, S. E., S. Dariushi, M. Sadighi, and P. Safarpour. 2010. A study on tensile properties of a novel fiber/metal laminates. Materials Science and Engineering A 527:4920–25. doi:10.1016/j.msea.2010.04.028.
   Web of Science ®Google Scholar
• Ng, L. F., D. Sivakumar, K. A. Zakaria, and M. Z. Selamat. 2017. Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering 11:61–68.
   Google Scholar
• Pickering, K. L., M. G. A. Efendy, and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing 83:98–112. doi:10.1016/j.compositesa.2015.08.038.
   Web of Science ®Google Scholar
• Rashdi, A. A. A., S. M. Sapuan, M. M. H. M. Ahmad, and K. B. Abdan. 2009. Review of kenaf fiber reinforced polymer composites. Polimery 54:777–80.
   Web of Science ®Google Scholar
• Razali, N., S. M. Sapuan, M. Jawaid, M. R. Ishak, and Y. Lazim. 2016. Mechanical and thermal properties of roselle fibre reinforced vinyl ester composites. BioResources 11:9325–39. doi:10.15376/biores.11.4.9325-9339.
   Web of Science ®Google Scholar
• Reyes, G., and H. Kang. 2007. Mechanical behavior of lightweight thermoplastic fiber-metal laminates. Journal of Materials Processing Technology 186:284–90. doi:10.1016/j.jmatprotec.2006.12.050.
   Web of Science ®Google Scholar
• Rojo, E., M. V. Alonso, M. Oliet, B. Del Saz-Orozco, and F. Rodriguez. 2015. Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites. Composites Part B: Engineering 68:185–92. doi:10.1016/j.compositesb.2014.08.047.
   Web of Science ®Google Scholar
• Sadighi, M., R. C. Alderliesten, and R. Benedictus. 2012. Impact resistance of fiber-metal laminates: A review. International Journal of Impact Engineering 49:77–90. doi:10.1016/j.ijimpeng.2012.05.006.
   Web of Science ®Google Scholar
• Shah, D. U., P. J. Schubel, M. J. Clifford, and P. Licence. 2014. Fatigue life evaluation of aligned plant fibre composites through S-N curves and constant-life diagrams. Composites Science and Technology 74:139–49. doi:10.1016/j.compscitech.2012.10.015.
   Web of Science ®Google Scholar
• Sinmazçelik, T., E. Avcu, M. Ö. Bora, and O. Çoban. 2011. A review: Fibre metal laminates, background, bonding types and applied test methods. Materials and Design 32:3671–85. doi:10.1016/j.matdes.2011.03.011.
   Web of Science ®Google Scholar
• Sivakumar, D., L. F. Ng, and N. S. Salmi. 2016. Eco-hybrid composite failure behavior of two serial bolted joint holes. Journal of Engineering and Technology 7:114–24.
   Google Scholar
• Sivakumar, D., L. F. Ng, R. M. Chew, and O. Bapokutty. 2017a. Investigation on failure strength of bolted joints woven fabric reinforced hybrid composite. International Review of Mechanical Engineering 11:138–43.
   Google Scholar
• Sivakumar, D., L. F. Ng, S. M. Lau, and K. T. Lim. 2017b. Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. Journal of Polymers and the Environment 26:499–507. doi:10.1007/s10924-017-0970-0.
   Web of Science ®Google Scholar
• Sugiman, S., and A. D. Crocombe. 2012. The static and fatigue response of metal laminate and hybrid fibre-metal laminate doublers joints under tension loading. Composite Structures 94:2937–51. doi:10.1016/j.compstruct.2012.03.013.
   Web of Science ®Google Scholar
• Xia, Y., Y. Wang, Y. Zhou, and S. Jeelani. 2007. Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates. Materials Letters 61:213–15. doi:10.1016/j.matlet.2006.04.043.
   Web of Science ®Google Scholar
• Xie, Y., C. A. S. Hill, Z. Xiao, H. Militz, and C. Mai. 2010. Silane coupling agents used for natural fiber/polymer composites: A review. Composites Part A: Applied Science and Manufacturing 41:806–19. doi:10.1016/j.compositesa.2010.03.005.
   Web of Science ®Google Scholar
• Zhou, J., Z. W. Guan, and W. J. Cantwell. 2015. The influence of strain-rate on the perforation resistance of fiber metal laminates. Composite Structures 125:247–55. doi:10.1016/j.compstruct.2015.02.034.
   Web of Science ®Google Scholar