References
- Abilash, N., and M. Sivapragash. 2016. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. Journal of King Saud University – Engineering Sciences 28 (1):92–102. doi:https://doi.org/10.1016/j.jksues.2013.09.004.
- Andersons, J., and R. Joffe. 2011. Estimation of tensile strength of an oriented flax fibre reinforced polymer composite. Composites. Part A, Applied Science and Manufacturing 42 (9):1229–35. doi:https://doi.org/10.1016/j.compositesa.2011.05.005.
- Azmi, H., C. H. C. Haron, J. A. Ghani, M. Suhaily, A. B. Sanuddin, and J. H. Song. 2016. Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology. ARPN Journal of Engineering and Applied Sciences 11 (7):4761–66.
- Babu, G. D., K. S. Babu, and B. U. M. Gowd. 2013. Effect of machining parameters on milled natural fiberreinforced plastic composites. Journal of Advanced Mechanical Engineering 1:1–12.
- Barreto, A. C. H., D. S. Rosa, P. B. A. Fechine, and S. E. Mazzetto. 2011. Properties of sisal fibers treated by alkali solution and their application into cardanol-based biocomposites. Composites. Part A, Applied Science and Manufacturing 42 (5):492–500. doi:https://doi.org/10.1016/j.compositesa.2011.01.008.
- Çelik, Y. H., E. Kilickap, and A. İ. Kilickap. 2019a. An experimental study on milling of natural fiber (jüte)-reinforced polymer composites. Journal of Composite Materials 53 (22):3127–37. doi:https://doi.org/10.1177/0021998319826373.
- Çelik, Y. H., E. Kilickap, and N. Koçyiğit. 2019b. Evaluation of drilling performances of nanocomposites reinforced with graphene and graphene oxide. The International Journal of Advanced Manufacturing Technology 100 (9–12):2371–85. doi:https://doi.org/10.1007/s00170-018-2875-z.
- Chaudhary, V., P. K. Bajpai, and S. Maheshwari. 2018. Studies on mechanical and morphological characterization of developed jute/hemp/flax reinforced hybrid composites for structural applications. Journal of Natural Fibers 15 (1):80–97. doi:https://doi.org/10.1080/15440478.2017.1320260.
- Chegdani, F., and M. E. Mansori. 2019. Tribo-functional effects of double-crossed helix on surface finish, cutting friction and tool wear mechanisms during the milling process of natural fiber composites. Wear 426-427 (Part B):1507–14. doi:https://doi.org/10.1016/j.wear.2018.11.026.
- Chegdani, F., S. Mezghani, and M. E. Mansori. 2017. Correlation between mechanical scales and analysis scales of topographic signals under milling process of natural fibre composites. Journal of Composite Materials 51 (19):2743–56. doi:https://doi.org/10.1177/0021998316676625.
- Debnath, K., I. Singh, and A. Dvivedi. 2014. Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites. Materials and Manufacturing Processes 29 (11–12):1401–09. doi:https://doi.org/10.1080/10426914.2014.941870.
- Dittenber, D. B., and H. V. S. GangaRao. 2012. Critical review of recent publications on use of natural composites in infrastructure. Composites. Part A, Applied Science and Manufacturing 43 (8):1419–29. doi:https://doi.org/10.1016/j.compositesa.2011.11.019.
- Ellenberger, A., M. L. Polli, E. C. De Azevedo, A. P. De Lara, and R. D. O. Dos Santos. 2019. End milling of banana stem fiber and polyurethane derived from castor oil composite. Journal of Natural Fibers 1–10. doi:https://doi.org/10.1080/15440478.2019.1691124.
- Gokulkumar, S., P. R. Thyla, R. ArunRamnath, and N. Karthi. 2020. Acoustical analysis and drilling process optimization of camellia sinensis/ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications. Journal of Natural Fibers 1–18. doi:https://doi.org/10.1080/15440478.2020.1726240.
- Lotfi, A., H. Li, and D. V. Dao. 2018. Drilling behavior of flax/poly (lactic acid) bio-composite laminates: An experimental investigation. Journal of Natural Fibers. doi:https://doi.org/10.1080/15440478.2018.1558158.
- Maleki, H. R., M. Hamedi, M. Kubouchi, and Y. Arao. 2019a. Experimental investigation on drilling of natural flax fiber-reinforced composites. Materials and Manufacturing Processes 34 (3):283–92. doi:https://doi.org/10.1080/10426914.2018.1532584.
- Maleki, H. R., M. Hamedi, M. Kubouchi, and Y. Arao. 2019b. Experimental study on drilling of jute fiber reinforced polymer composites. Journal of Composite Materials 53 (3):283–95. doi:https://doi.org/10.1177/0021998318782376.
- Nasir, A. A. A., A. L. Azmi, and A. N. M. Khail. 2015. Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement 75:298–307. doi:https://doi.org/10.1016/j.measurement.2015.07.046.
- Nassar, M. M. A., R. Arunachalam, and K. I. Alzebdeh. 2017. Machinability of natural fiber reinforced composites: A review. The International Journal of Advanced Manufacturing Technology 88 (9–12):2985–3004. doi:https://doi.org/10.1007/s00170-016-9010-9.
- Pailoor, S., H. N. N. Murthy, and T. N. Sreenivasa. 2019. Drilling of in-line compression molded jute/polypropylene composites. Journal of Natural Fibers 1–14. doi:https://doi.org/10.1080/15440478.2019.1612309.
- Pickering, K. L., M. G. A. Efendy, and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composite Part A: Applied Science and Manufacturing 83:98–112. doi:https://doi.org/10.1016/j.compositesa.2015.08.038.
- Rajmohan, T., R. Vinayagamoorthy, and K. Mohan. 2018. Review on effect machining parameters on performance of natural fibre–reinforced composites (NFRCs). Journal of Thermoplastic Composite Materials 1–21. doi:https://doi.org/10.1177/0892705718796541.
- Santulli, C., F. Sarasini, J. Tirillò, T. Valente, M. Valente, A. P. Caruso, M. Infantino, E. Nisini, and G. Minak. 2013. Mechanical behaviour of jute cloth/wool felts hybrid laminates. Materials & Design 50:309–21. doi:https://doi.org/10.1016/j.matdes.2013.02.079.
- Seki, Y. 2009. Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites. Materials Science and Engineering: A 508 (1–2):247–52. doi:https://doi.org/10.1016/j.msea.2009.01.043.
- Sever, K., M. Sarikanat, Y. Seki, G. Erkan, and U. H. Erdoğan. 2010. The mechanical properties of c-methacryloxypropyltrimethoxy silane-treated jute/polyester composites. Journal of Composite Materials 44 (5):913–1924. doi:https://doi.org/10.1177/0021998309360939.
- Sirivastava, T. V. K., and A. K. Samanta. 1998. Fibre reinforced composites from jute as wood substitute: Multiplicity of application (including some studies on use of Jute- reinforced composites in replacement of wooden picking stick by JRC in Silk loom). Man-MadeTextiles in India 45.
- Udhayasankar, R., and B. Karthikeyan. 2015. A review on coconut shell reinforced composites. International Journal of ChemTech Research 8 (11):624–37.
- Vinayagamoorthy, R., N. Rajeswari, and B. Karuppiah. 2014. Optimization studies on thrust force and torque during drilling of natural fiber reinforced sandwich composites. Jordan Journal of Mechanical and Industrial Engineering 8 (6):385–92.