References
- Abernethy, R. B. 1996. The new Weibull handbook. North Palm Beach, Florida: Dr. Robert B. Abernethy.
- Amroune, S., A. Bezazi, A. Belaadi, C. Zhu, F. Scarpa, S. Rahatekar, and A. Imad. 2015. Tensile mechanical properties and surface chemical sensitivity of technical fibres from date palm fruit branches (Phoenix dactylifera L.). Composites. Part A, Applied Science and Manufacturing 71:95–106. doi:https://doi.org/10.1016/j.compositesa.2014.12.011.
- Amroune, S., A. Bezazi, A. Dufresne, F. Scarpa, and A. Imad. 2019. Investigation of the date palm fiber for green composites reinforcement: Thermo-physical and mechanical properties of the fiber. Journal of Natural Fibers 1–18. doi:https://doi.org/10.1080/15440478.2019.1645791.
- Andersons, J., E. Spārniņš, R. Joffe, and L. Wallström. 2005. Strength distribution of elementary flax fibres. Composites Science and Technology 65 (3–4):693–702. doi:https://doi.org/10.1016/j.compscitech.2004.10.001.
- Andersons, J., E. Spārniņš, and E. Poriķe. 2009. Strength and damage of elementary flax fibers extracted from tow and long line flax. Journal of Composite Materials 43 (22):2653–64. doi:https://doi.org/10.1177/0021998309345035.
- Baley, C. 2002. Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Composites. Part A, Applied Science and Manufacturing 33 (7):939–48. doi:https://doi.org/10.1016/S1359-835X(02)00040-4.
- Baley, C. 2003. Contribution à l’étude de matériaux composites à matrice organique renforcés par des fibres de lin.
- Bedjaoui, A., A. Belaadi, S. Amroune, and B. Madi. 2019. Impact of surface treatment of flax fibers on tensile mechanical properties accompanied by a statistical study. International Journal of Integrated Engineering 11 (6):10–17. doi:https://doi.org/10.30880/ijie.2019.11.06.002.
- Belaadi, A., A. Bezazi, M. Bourchak, and F. Scarpa. 2013. Tensile static and fatigue behaviour of sisal fibres. Materials & Design 46:76–83. doi:https://doi.org/10.1016/j.matdes.2012.09.048.
- Belaadi, A., A. Bezazi, M. Bourchak, F. Scarpa, and C. Zhu. 2014. Thermochemical and statistical mechanical properties of natural sisal fibres. Composites Part B: Engineering 67:481–89. doi:https://doi.org/10.1016/j.compositesb.2014.07.029.
- Belaadi, A., M. Bourchak, and H. Aouici. 2016. Mechanical properties of vegetal yarn: Statistical approach. Composites Part B: Engineering 106:139–53. doi:https://doi.org/10.1016/j.compositesb.2016.09.033.
- Bergman, B. 1984. On the estimation of the Weibull modulus. Journal of Materials Science Letters 3 (8):689–92. doi:https://doi.org/10.1007/BF00719924.
- Bezazi, A., A. Belaadi, M. Bourchak, F. Scarpa, and K. Boba. 2014. Novel extraction techniques, chemical and mechanical characterisation of Agave americana L. natural fibres. Composites Part B: Engineering 66:194–203. doi:https://doi.org/10.1016/j.compositesb.2014.05.014.
- Bodros, E., and C. Baley. 2008. Study of the tensile properties of stinging nettle fibres (Urtica dioica). Materials Letters 62 (14):2143–45. doi:https://doi.org/10.1016/j.matlet.2007.11.034.
- Bourahli, M. 2018. Uni-and bimodal Weibull distribution for analyzing the tensile strength of Diss fibers. Journal of Natural Fibers 15 (6):843–52. doi:https://doi.org/10.1080/15440478.2017.1371094.
- Brígida, A. I. S., V. M. A. Calado, L. R. B. Gonçalves, and M. A. Z. Coelho. 2010. Effect of chemical treatments on properties of green coconut fiber. Carbohydrate Polymers 79 (4):832–38. doi:https://doi.org/10.1016/j.carbpol.2009.10.005.
- Charlet, K., and A. Béakou. 2011. Mechanical properties of interfaces within a flax bundle–Part I: Experimental analysis. International Journal of Adhesion and Adhesives 31 (8):875–81. doi:https://doi.org/10.1016/j.ijadhadh.2011.08.008.
- Cortés-Martínez, C. I., and R. F. García-Méndez. 2017. Morphology of the bagasse fibers obtained from the elaboration process of Mezcal and effects on their tensile properties. Journal of Natural Fibers 14 (2):250–61. doi:https://doi.org/10.1080/15440478.2016.1193089.
- Defoirdt, N., S. Biswas, L. D. Vriese, L. Q. N. Tran, J. V. Acker, Q. Ahsan, L. Gorbatikh, A. V. Vuure, and I. Verpoest. 2010. Assessment of the tensile properties of coir, bamboo and jute fibre. Composites. Part A, Applied Science and Manufacturing 41 (5):588–95. doi:https://doi.org/10.1016/j.compositesa.2010.01.005.
- Dittenber, D. B., and H. V. S. GangaRao. 2012. Critical review of recent publications on use of natural composites in infrastructure. Composites. Part A, Applied Science and Manufacturing 43 (8):1419–29. doi:https://doi.org/10.1016/j.compositesa.2011.11.019.
- El Asloun, M., J. Donnet, G. Guilpain, M. Nardin, and J. Schultz. 1989. On the estimation of the tensile strength of carbon fibres at short lengths. Journal of Materials Science 24 (10):3504–10. doi:https://doi.org/10.1007/BF02385732.
- Gorjan, L., and M. Ambrožič. 2012. Bend strength of alumina ceramics: A comparison of Weibull statistics with other statistics based on very large experimental data set. Journal of the European Ceramic Society 32 (6):1221–27. doi:https://doi.org/10.1016/j.jeurceramsoc.2011.12.010.
- Heller, K., Q. C. Sheng, F. Guan, E. Alexopoulou, L. S. Hua, G. W. Wu, Z. Jankauskienė, and W. Y. Fu. 2015. A comparative study between Europe and China in crop management of two types of flax: Linseed and fibre flax. Industrial Crops and Products 68:24–31. doi:https://doi.org/10.1016/j.indcrop.2014.07.010.
- Jihan, S., A. Siddiqui, and M. Sweet. 1997. Fracture strength of E-glass fibre strands using acoustic emission. Ndt & E International 30 (6):383–88. doi:https://doi.org/10.1016/S0963-8695(97)00009-1.
- Johnson Norman, L., K. Samuel, and N. Balakrishnan. 1994. Continuous univariate distributions, 784. New York: John Wiley & Sons, Inc.
- Joshi, S. V., L. T. Drzal, A. K. Mohanty, and S. Arora. 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites. Part A, Applied Science and Manufacturing 35 (3):371–76. doi:https://doi.org/10.1016/j.compositesa.2003.09.016.
- Lamy, B., and C. Baley. 2000. Stiffness prediction of flax fibers-epoxy composite materials. Journal of Materials Science Letters 19 (11):979–80. doi:https://doi.org/10.1023/A:1006776423764.
- Latif, W., A. Basit, A. Rehman, M. Ashraf, K. Iqbal, A. Jabbar, S. A. Baig, and S. Maqsood. 2019. Study of mechanical and comfort properties of modal with cotton and regenerated fibers blended woven fabrics. Journal of Natural Fibers 16 (6):836–45. doi:https://doi.org/10.1080/15440478.2018.1441084.
- Lu, Y., L. Weng, and X. Cao. 2006. Morphological, thermal and mechanical properties of ramie crystallites—reinforced plasticized starch biocomposites. Carbohydrate Polymers 63 (2):198–204. doi:https://doi.org/10.1016/j.carbpol.2005.08.027.
- Maache, M., A. Bezazi, S. Amroune, F. Scarpa, and A. Dufresne. 2017. Characterization of a novel natural cellulosic fiber from Juncus effusus L. Carbohydrate Polymers 171:163–72. doi:https://doi.org/10.1016/j.carbpol.2017.04.096.
- Montalvo, J. G., Jr, and T. Von Hoven. 2004. Analysis of cotton. Near‐infrared spectroscopy in agriculture. 44:671–728.
- Park, J.-M., S. T. Quang, B.-S. Hwang, and K. L. DeVries. 2006. Interfacial evaluation of modified Jute and Hemp fibers/polypropylene (PP)-maleic anhydride polypropylene copolymers (PP-MAPP) composites using micromechanical technique and nondestructive acoustic emission. Composites Science and Technology 66 (15):2686–99. doi:https://doi.org/10.1016/j.compscitech.2006.03.014.
- Placet, V. 2009. Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites. Composites Part A: Applied Science and Manufacturing 40 (8):1111–18. doi:https://doi.org/10.1016/j.compositesa.2009.04.031.
- Punyamurthy, R., D. Sampathkumar, R. P. G. Ranganagowda, B. Bennehalli, and C. V. Srinivasa. 2017. Mechanical properties of abaca fiber reinforced polypropylene composites: Effect of chemical treatment by benzenediazonium chloride. Journal of King Saud University - Engineering Sciences 29 (3):289–94. doi:https://doi.org/10.1016/j.jksues.2015.10.004.
- Quinn, J. B., and G. D. Quinn. 2010. A practical and systematic review of Weibull statistics for reporting strengths of dental materials. Dental Materials 26 (2):135–47. doi:https://doi.org/10.1016/j.dental.2009.09.006.
- Saaidia, A., A. Bezazi, A. Belbah, S. Amroune, and F. Scarpa. 2015. Evaluation of mechanical properties of jute yarns by two-and three-parameters weibull method. Structural Integrity and Life-integritet I Vek Konstrukcija 15 (3):157–62.
- Stawarczyk, B., M. Özcan, A. Trottmann, C. H. Hämmerle, and M. Roos. 2012. Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics. Journal of the Mechanical Behavior of Biomedical Materials 10:227–34. doi:https://doi.org/10.1016/j.jmbbm.2012.01.020.
- Summerscales, J., N. P. J. Dissanayake, A. S. Virk, and W. Hall. 2010. A review of bast fibres and their composites. Part 1 – Fibres as reinforcements. Composites. Part A, Applied Science and Manufacturing 41 (10):1329–35. doi:https://doi.org/10.1016/j.compositesa.2010.06.001.
- Svennerstedt, B. 2009. Hemp fiber strength and thickness: A study of plant development of swedish-grown industrial hemp. Journal of Natural Fibers 6 (4):295–302. doi:https://doi.org/10.1080/15440470903342948.
- Tagne Nicodème Rodrigue, S., N. Ebénézer, N. Dieunedort, F. Didier, M. Fogue, J.-Y. Drean, and O. Harzallah. 2017. Investigation of the physical and mechanical properties of Raffia Vinifera fibers along the stem. Journal of Natural Fibers 14 (5):621–33. doi:https://doi.org/10.1080/15440478.2016.1250025.
- Thomason, J. 2013. On the application of Weibull analysis to experimentally determined single fibre strength distributions. Composites Science and Technology 77:74–80. doi:https://doi.org/10.1016/j.compscitech.2013.01.009.
- Trujillo, E., M. Moesen, L. Osorio, A. W. Van Vuure, J. Ivens, and I. Verpoest. 2014. Bamboo fibres for reinforcement in composite materials: Strength Weibull analysis. Composites. Part A, Applied Science and Manufacturing 61:115–25. doi:https://doi.org/10.1016/j.compositesa.2014.02.003.
- van der Zwaag, S. 1989. The concept of filament strength and the Weibull modulus. Journal of Testing and Evaluation 17 (5):292–98. doi:https://doi.org/10.1520/JTE11131J.
- Virk, A. S., W. Hall, and J. Summerscales. 2009. Multiple Data Set (MDS) weak-link scaling analysis of jute fibres. Composites. Part A, Applied Science and Manufacturing 40 (11):1764–71. doi:https://doi.org/10.1016/j.compositesa.2009.08.022.
- Virk, A. S., W. Hall, and J. Summerscales. 2010. Failure strain as the key design criterion for fracture of natural fibre composites. Composites Science and Technology 70 (6):995–99. doi:https://doi.org/10.1016/j.compscitech.2010.02.018.
- Wang, B., S. Panigrahi, L. Tabil, and W. Crerar. 2007. Pre-treatment of flax fibers for use in rotationally molded biocomposites. Journal of Reinforced Plastics and Composites 26 (5):447–63. doi:https://doi.org/10.1177/0731684406072526.
- Weibull, W. 1939. A statistical theory of strength of materials. IVB-Handl.
- Weibull, W. 1951. A statistical distribution function of wide applicability. Journal of Applied Mechanics 18 (3):293–97.
- Yousif, B. F., C. Orupabo, and Z. N. Azwa. 2012. Characteristics of kenaf fiber immersed in different solutions. Journal of Natural Fibers 9 (4):207–18. doi:https://doi.org/10.1080/15440478.2012.733149.
- Zafeiropoulos, N., and C. Baillie. 2007. A study of the effect of surface treatments on the tensile strength of flax fibres: Part II. Application of Weibull statistics. Composites. Part A, Applied Science and Manufacturing 38 (2):629–38. doi:https://doi.org/10.1016/j.compositesa.2006.02.005.
- Zafeiropoulos, N., G. Dijon, and C. Baillie. 2007. A study of the effect of surface treatments on the tensile strength of flax fibres: Part I. Application of Gaussian statistics. Composites. Part A, Applied Science and Manufacturing 38 (2):621–28. doi:https://doi.org/10.1016/j.compositesa.2006.02.004.