References
- Abenojar, J., J. Tutor, Y. Ballesteros, J. C. Del Real, and M. A. Martínez. 2017. Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites. Composites Part B: Engineering 120:42–53. doi:https://doi.org/10.1016/j.compositesb.2017.03.047.
- Alamri, H., and I. M. Low. 2012. Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites. Polymer Testing 31 (5):620–28. doi:https://doi.org/10.1016/j.polymertesting.2012.04.002.
- Anbukarasi, K., and S. Kalaiselvam. 2015. Study of effect of fibre volume and dimension on mechanical, thermal, and water absorption behaviour of luffa reinforced epoxy composites. Materials & Design 66 (PA):321–30. doi:https://doi.org/10.1016/j.matdes.2014.10.078.
- Bachtiar, D., S. M. Sapuan, and M. M. Hamdan. 2008. The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Materials & Design 29 (7):1285–90. doi:https://doi.org/10.1016/j.matdes.2007.09.006.
- Bagheri, K., S. M. Razavi, S. J. Ahmadi, M. Kosari, and H. Abolghasemi. 2018. Thermal resistance, tensile properties, and gamma radiation shielding performance of unsaturated polyester/nanoclay/PbO composites. Radiation Physics and Chemistry 146:5–10. doi:https://doi.org/10.1016/j.radphyschem.2017.12.024.
- Bhuvaneshwaran, M., S. P. Subramani, S. K. Palaniappan, S. K. Pal, and S. Balu. 2019. Natural cellulosic fiber from coccinia indica stem for polymer composites: extraction and characterization. Journal of Natural Fibers 1–9. doi:https://doi.org/10.1080/15440478.2019.1642826.
- Boopalan, M., M. Niranjanaa, and M. J. Umapathy. 2013. Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites. Composites Part B: Engineering 51:54–57. doi:https://doi.org/10.1016/j.compositesb.2013.02.033.
- Braga, R. A., and P. A. A. Magalhaes. 2015. Analysis of the mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites. Materials Science and Engineering C 56:269–73. doi:https://doi.org/10.1016/j.msec.2015.06.031.
- Cai, M., A. N. Hitoshi Takagi, Y. L. Nakagaito, and I. N. W. Geoffrey. 2016. Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites. Composites. Part A, Applied Science and Manufacturing 90 (2019):589–97. doi:https://doi.org/10.1016/j.compositesa.2016.08.025.
- Chen, Y., S. Na, K. Zhang, S. Zhu, Z. Zhu, W. Qin, Y. Yang, Y. Shi, S.Fan, Z.Wang, and Y. Guo . 2018. Effect of fiber surface treatment on structure, moisture absorption and mechanical properties of luffa sponge fiber bundles. Industrial Crops and Products 123 (January):341–52. doi:https://doi.org/10.1016/j.indcrop.2018.06.079.
- Daniel-Mkpume, C. C., C. Ugochukwu, E. G. Okonkwo, O. S. I. Fayomi, and S. M. Obiorah. 2019. Effect of luffa cylindrica fiber and particulate on the mechanical properties of epoxy. International Journal of Advanced Manufacturing Technology 102 (9–12):3439–44. doi:https://doi.org/10.1007/s00170-019-03422-w.
- Durowaye, S. I., G. I. Lawal, O. I. Sekunowo, and E. G. Okonkwo. 2018. Synthesis and characterisation of hybrid polyethylene terephthalate matrix composites reinforced with entada mannii fibre particles and almond shell particles. Journal of King Saud University - Engineering Sciences 31 (4):305–13. doi:https://doi.org/10.1016/j.jksues.2017.09.006.
- Efendy, M. G. A., and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites. Part A, Applied Science and Manufacturing 83:98–112. doi:https://doi.org/10.1016/j.compositesa.2015.08.038.
- Ganapathy, T., R. Sathiskumar, M. R. Sanjay, P. Senthamaraikannan, S. S. Saravanakumar, J. Parameswaranpillai, and S. Siengchin. 2019. Effect of graphene powder on banyan aerial root fibers reinforced epoxy composites. Journal of Natural Fibers 1–8. doi:https://doi.org/10.1080/15440478.2019.1675219.
- Gupta, A. 2019. Improvement of physiochemical properties of short bamboo fiber-reinforced composites using ceramic fillers. Journal of Natural Fibers 1–12. doi:https://doi.org/10.1080/15440478.2019.1584079.
- Harish, S., D. Peter Michael, A. Bensely, D. Mohan Lal, and A. Rajadurai. 2009. Mechanical property evaluation of natural fiber coir composite. Materials Characterization 60 (1):44–49. doi:https://doi.org/10.1016/j.matchar.2008.07.001.
- Hulugappa, B., M. V. Achutha, and B. Suresha. 2016. Effect of fillers on mechanical properties and fracture toughness of glass fabric reinforced epoxy composites. Journal of Minerals and Materials Characterization and Engineering:1–14. doi:https://doi.org/10.4236/jmmce.2016.41001.
- Huner, U. 2018. Effect of chemical surface treatment on flax-reinforced epoxy composite. Journal of Natural Fibers 15 (6):808–21. doi:https://doi.org/10.1080/15440478.2017.1369207.
- Karthik Babu, N. B., S. Muthukumaran, S. Arokiasamy, and T. Ramesh. 2018. Thermal and mechanical behavior of the coir powder filled polyester micro-composites. Journal of Natural Fibers:1–11. doi:https://doi.org/10.1080/15440478.2018.1555503.
- Manimaran, P., A. Shadrach Jeyasekaran, R. Purohit, and G. Pitchayya Pillai. 2018. An experimental and numerical investigation on the mechanical properties of addition of wood flour fillers in red banana peduncle fiber reinforced polyester composites. Journal of Natural Fibers 1–19. doi:https://doi.org/10.1080/15440478.2018.1558148.
- Mohanta, N., and S. K. Acharya. 2016. Fiber surface treatment: Its effect on structural, thermal, and mechanical properties of luffa cylindrica fiber and its composite. Journal of Composite Materials 50 (22):3117–31. doi:https://doi.org/10.1177/0021998315615654.
- Mohanta, N., and S. K. Acharya. 2015. Investigation of mechanical properties of luffa cylindrica fibre reinforced epoxy hybrid composite. International Journal of Engineering, Science and Technology 7 (1):1–10. doi:https://doi.org/10.4314/ijest.v7i1.1.
- Nikmatin, S., A. Syafiuddin, A. B. H. Kueh, and A. Maddu. 2017. Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles. Journal of Applied Research and Technology 15 (4):386–95.Universidad Nacional Autónoma de México, Centro de Ciencias Aplicadas y Desarrollo Tecnológico. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). doi: https://doi.org/10.1016/j.jart.2017.03.008.
- Özdemir, T., A. Güngör, I. K. Akbay, H. Uzun, and Y. Babucçuoglu. 2018. Nano lead oxide and epdm composite for development of polymer based radiation shielding material: Gamma irradiation and attenuation tests. Radiation Physics and Chemistry 144:248–55. doi:https://doi.org/10.1016/j.radphyschem.2017.08.021.
- Patel, V. K., and A. Dhanola. 2016. Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of luffa cylindrica/polyester composites. Engineering Science and Technology, an International Journal 19 (2):676–83. doi:https://doi.org/10.1016/j.jestch.2015.10.005.
- Prasad, V. M., A. Joseph, and K. Sekar. 2018. Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Composites part A: Applied science and manufacturing, 115:360–370 doi:https://doi.org/10.1016/j.compositesa.2018.09.031.
- Premalatha, N., S. S. Saravanakumar, M. R. Sanjay, S. Siengchin, and A. Khan. 2019. Structural and thermal properties of chemically modified luffa cylindrica fibers. Journal of Natural Fibers 1–7. doi:https://doi.org/10.1080/15440478.2019.1678546.
- Ramesh, M., K. Palanikumar, and K. Hemachandra Reddy. 2013. Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites. Composites Part B: Engineering 48:1–9. doi:https://doi.org/10.1016/j.compositesb.2012.12.004.
- Sathishkumar, G. K., G. Rajkumar, K. Srinivasan, and M. J. Umapathy. 2018. Structural analysis and mechanical properties of lignite fly-ash-added jute–epoxy polymer matrix composite. Journal of Reinforced Plastics and Composites 37 (2):90–104. doi:https://doi.org/10.1177/0731684417735183.
- Sepe, R., F. Bollino, L. Boccarusso, and F. Caputo. 2018. Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Composites Part B: Engineering 133:210–17. doi:https://doi.org/10.1016/j.compositesb.2017.09.030.
- Shalwan, A., and B. F. Yousif. 2014. Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites. Materials & Design 59:264–73. doi:https://doi.org/10.1016/j.matdes.2014.02.066.
- Siqueira, É. J., and V. R. Botaro. 2013. Luffa cylindrica fibres/vinylester matrix composites: Effects of 1,2,4,5-benzenetetracarboxylic dianhydride surface modification of the fibres and aluminum hydroxide addition on the properties of the composites. Composites Science and Technology 82:76–83. doi:https://doi.org/10.1016/j.compscitech.2013.04.012.
- Soundhar, A., and J. Kandasamy. 2019. Mechanical, chemical and morphological analysis of crab shell/sisal natural fiber hybrid composites. Journal of Natural Fibers 1–15. doi:https://doi.org/10.1080/15440478.2019.1691127.
- Srinivasan, V. S., S. Rajendra Boopathy, D. Sangeetha, and B. Vijaya Ramnath. 2014. Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite. Materials & Design 60:620–27. doi:https://doi.org/10.1016/j.matdes.2014.03.014.
- Srivabut, C., T. Ratanawilai, and S. Hiziroglu. 2018. Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber. Construction and Building Materials 162:450–58. doi:https://doi.org/10.1016/j.conbuildmat.2017.12.048.
- Swain, P., T. Ranjan, and S. Biswas. 2017. Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler. Journal of Composite Materials 51 (28):3909–22. doi:https://doi.org/10.1177/0021998317695420.
- Vinod, A., R. Vijay, and D. Lenin Singaravelu. 2017. ThermoMechanical characterization of calotropis gigantea stem powder-filled jute fiber-reinforced epoxy composites thermomechanical characterization of calotropis gigantea stem. Journal of Natural Fibers 1–10. doi:https://doi.org/10.1080/15440478.2017.1354740.
- Yan, L., N. Chouw, L. Huang, and B. Kasal. 2016. Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites. Construction and Building Materials 112:168–82. doi:https://doi.org/10.1016/j.conbuildmat.2016.02.182.