References
- Abdallah, B., S. M. Teixeira, I. Chala, B. Otazaghine, R. Sonnier, C. Longuet, J. C. Roux, and S. Rouif. 2019. Chemical treatments of flax fibers – Control of the diffusion of molecules into the fiber structure. Industrial Crops and Products 132:430–39. doi:https://doi.org/10.1016/j.indcrop.2019.02.041.
- Akpan, E. I., S. O. Adeosun, G. I. Lawal, S. A. Balogun, and X. D. Chen. 2016. Characterization of adhesion surface of cellulosic fibers extracted from agro wastes. Journal of Natural Fibers 13 (1):103–24. doi:https://doi.org/10.1080/15440478.2014.1002148.
- Amiri, A., Z. Triplett, A. Moreira, N. Brezinka, M. Alcock, and C. A. Ulven. 2017. Standard density measurement method development for flax fiber. Industrial Crops and Products 96:196–202. doi:https://doi.org/10.1016/j.indcrop.2016.11.060.
- Amroune, S., A. Bezazi, A. Belaadi, C. Zhu, F. Scarpa, S. Rahatekar, and A. Imad. 2015. Tensile mechanical properties and surface chemical sensitivity of technical fibres from date palm fruit branches (Phoenix Dactylifera L.). Composites. Part A, Applied Science and Manufacturing 71:95–106. doi:https://doi.org/10.1016/j.compositesa.2014.12.011.
- Azwa, Z. N., B. F. Yousif, A. C. Manalo, and W. Karunasena. 2013. A review on the degradability of polymeric composites based on natural fibres. Materials & Design 47:424–42. doi:https://doi.org/10.1016/j.matdes.2012.11.025.
- Bajpai, P. K., I. Singh, and J. Madaan. 2012. Comparative studies of mechanical and morphological properties of polylactic acid and polypropylene based natural fiber composites. Journal of Reinforced Plastics and Composites 32 (24):1712–24. doi:https://doi.org/10.1177/0731684412447992.
- Bajpai, P. K., I. Singh, and J. Madaan. 2013. Tribological behavior of natural fiber reinforced PLA composites. Wear 297 (1–2):829–40. doi:https://doi.org/10.1016/j.wear.2012.10.019.
- Béakou, A., R. Ntenga, J. Lepetit, J. A. Atéba, and L. O. Ayina. 2008. Physico-chemical and microstructural characterization of ‘rhectophyllum camerunense’ plant fiber. Composites. Part A, Applied Science and Manufacturing 39 (1):67–74. doi:https://doi.org/10.1016/j.compositesa.2007.09.002.
- Belaadi, A., A. Bezazi, M. Bourchak, F. Scarpa, and C. Zhu. 2014. Thermochemical and statistical mechanical properties of natural sisal fibres. Composites Part B: Engineering 67:481–89. doi:https://doi.org/10.1016/j.compositesb.2014.07.029.
- Belouadah, Z., A. Ati, and M. Rokbi. 2015. Characterization of new natural cellulosic fiber from Lygeum Spartum L. Carbohydrate Polymers 134:429–37. doi:https://doi.org/10.1016/j.carbpol.2015.08.024.
- Bisanda, E. T. N. 2000. The effect of alkali treatment on the adhesion characteristics of sisal fibres. Applied Composite Materials 7:331–39. doi:https://doi.org/10.1023/A:1026586023129.
- Bismarck, A., I. Aranberri-Askargorta, J. Springer, T. Lampke, B. Wielage, A. Stamboulis, I. Shenderovich, and H. H. Limbach. 2002. Surface characterization of flax, hemp and water uptake behavior. Polymer Composites 23 (5):872–94. doi:https://doi.org/10.1002/pc.10485.
- Bledzki, A. K., H. P. Fink, and K. Specht. 2004. Unidirectional hemp and flax EP- and PP-composites: Influence of defined fiber treatments. Journal of Applied Polymer Science 93 (5):2150–56. doi:https://doi.org/10.1002/app.20712.
- Bodros, E., and C. Baley. 2008. Study of the tensile properties of stinging nettle fibres (Urtica Dioica). Materials Letters 62 (14):2147–49. doi:https://doi.org/10.1016/j.matlet.2007.11.034.
- Bourmaud, A., and C. Baley. 2007. Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites. Polymer Degradation and Stability 92 (6):1034–45. doi:https://doi.org/10.1016/j.polymdegradstab.2007.02.018.
- Cai, M., H. Takagi, A. N. Nakagaito, K. Kusaka, M. Katoh, and Y. Li. 2015. Influence of alkali concentration on morphology and tensile properties of abaca fibers. Advanced Materials Research 1110:302–05. doi:10.4028/https://www.scientific.net/amr.1110.302.
- Carmody, O., R. Frost, Y. Xi, and S. Kokot. 2007. Surface characterisation of selected sorbent materials for common hydrocarbon fuels. Surface Science 601 (9):2066–76. doi:https://doi.org/10.1016/j.susc.2007.03.004.
- Chen, Y., N. Su, K. Zhang, S. Zhu, Z. Zhu, W. Qin, and Y. Yang. 2018. Effect of fiber surface treatment on structure, moisture absorption and mechanical properties of luffa sponge fiber bundles. Industrial Crops and Products 123:341–52. doi:https://doi.org/10.1016/j.indcrop.2018.06.079.
- Cheng, K., W. T. Winter, and A. J. Stipanovic. 2012. A modulated-TGA approach to the kinetics of lignocellulosic biomass pyrolysis/combustion. Polymer Degradation and Stability 97 (9):1606–15. doi:https://doi.org/10.1016/j.polymdegradstab.2012.06.027.
- Diaz, J. P. V., F. D. Silva, and J. R. M. D’Almeida. 2017. Effect of peach palm fiber microstructure on its tensile behavior. BioResources 11 (4):10140–57. doi:https://doi.org/10.15376/biores.11.4.10140-10157.
- Elahi, M. F., G. Guan, L. Wang, and M. W. King. 2014. Influence of layer-by-layer polyelectrolyte deposition and EDC/NHS activated heparin immobilization onto silk fibroin fabric. Materials 7 (4):2956–77. doi:https://doi.org/10.3390/ma7042956.
- Farias, F. O., A. C. Jasko, T. André, D. Colman, L. A. Pinheiro, E. Schnitzler, A. C. Barana, and I. M. Demiate. 2014. Characterisation of cassava bagasse and composites prepared by blending with low-density polyethylene. Brazilian Archives of Biology and Technlogy 57 (6):821–30. doi:https://doi.org/10.1590/S1516-8913201402506.
- Fiore, V., T. Scalici, and A. Valenza. 2014. Characterization of a new natural fiber from arundo donax L. as potential reinforcement of polymer composites. Carbohydrate Polymers 106 (1):77–83. doi:https://doi.org/10.1016/j.carbpol.2014.02.016.
- George, J., M. S. Sreekala, and S. Thomas. 2001. A review on interface modification and characterization of natural fiber reinforced plastic composites. Polymer Engineering and Science 41 (9):1471–85. doi:https://doi.org/10.1002/pen.10846.
- George, M., P. G. Mussone, and D. C. Bressler. 2014. Surface and thermal characterization of natural fibres treated with enzymes. Industrial Crops and Products 53:365–73. doi:https://doi.org/10.1016/j.indcrop.2013.12.037.
- Graupner, N., A. S. Herrmann, and J. Müssig. 2009. Natural and man-made cellulose fibre-reinforced Poly(Lactic Acid) (PLA) composites: An overview about mechanical characteristics and application areas. Composites. Part A, Applied Science and Manufacturing 40 (6–7):810–21. doi:https://doi.org/10.1016/j.compositesa.2009.04.003.
- Guimarães, J. L., E. Frollini, C. G. da Silva, F. Wypych, and K. G. Satyanarayana. 2009. Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil. Industrial Crops and Products 30 (3):407–15. doi:https://doi.org/10.1016/j.indcrop.2009.07.013.
- Gujral, G. S., and P. Vasudevan. 1984. Economics of utilising saccharum munja roxb. Leaves for the pulp industry. Agricultural Wastes 11 (2):143–47. doi:https://doi.org/10.1016/0141-4607(84)90029-5.
- Gumuskaya, E., and M. Usta. 2002. Crystalline structure properties of bleached and unbleached wheat straw (Triticum Aestivum L.) soda-oxygen pulp. Turkish Journal of Agriculture and Forestry 26:247–52.
- Han, S. O., and H. Y. Choi. 2010. Morphology and surface properties of natural fiber treated with electron beam. In Microscopy: Science, technology, applications and education, ed. A. Méndez-Vilas and J. Díaz, 1880–87. Badajoz, Spain: Formatex.
- Hiziroglu, S., S. Jarusombuti, P. Bauchongkol, and V. Fueangvivat. 2008. Overlaying properties of fiberboard manufactured from bamboo and rice straw. Industrial Crops and Products 28 (1):107–11. doi:https://doi.org/10.1016/j.indcrop.2008.01.002.
- Indran, S., R. Edwin Raj, and V. S. Sreenivasan. 2014. Characterization of new natural cellulosic fiber from cissus quadrangularis stem. Carbohydrate Polymers 110:423–29. doi:https://doi.org/10.1016/j.carbpol.2014.04.051.
- Kalali, E. N., Y. Hu, X. Wang, L. Song, and W. Xing. 2019. Highly-aligned cellulose fibers reinforced epoxy composites derived from bulk natural bamboo. Industrial Crops and Products 129:434–39. doi:https://doi.org/10.1016/j.indcrop.2018.11.063.
- Khalil, H. P. S. A., A. H. Bhat, and A. F. I. Yusra. 2012. Green composites from sustainable cellulose nanofibrils: A review. Carbohydrate Polymers 87:963–79. doi:https://doi.org/10.1016/j.carbpol.2011.08.078.
- Kılınç, A. Ç., S. Köktaş, Y. Seki, M. Atagür, R. Dalmış, Ü. H. Erdoğan, A. A. Göktaş, and M. Ö. Seydibeyoğlu. 2018. Extraction and investigation of lightweight and porous natural fiber from conium maculatum as a potential reinforcement for composite materials in transportation. Composites Part B: Engineering 140:1–8. doi:https://doi.org/10.1016/j.compositesb.2017.11.059.
- Kommula, V. P., K. O. Reddy, M. Shukla, T. Marwala, E. V. S. Reddy, and A. V. Rajulu. 2016. Extraction, modification, and characterization of natural ligno-cellulosic fiber strands from napier grass. International Journal of Polymer Analysis and Characterization 21 (1):18–28. doi:https://doi.org/10.1080/1023666X.2015.1089650.
- Kumar, T. S., G. S. Gujral, and P. Vasudevan. 1983. Biomass potential of saccharum munja roxb. Agriculture, Ecosystems & Environment 10:399–100. doi:https://doi.org/10.1016/0167-8809(83)90090-7.
- Li, R., J. Fei, Y. Cai, Y. Li, J. Feng, and J. Yao. 2009. Cellulose whiskers extracted from mulberry: A novel biomass production. Carbohydrate Polymers 76 (1):94–99. doi:https://doi.org/10.1016/j.carbpol.2008.09.034.
- Li, X., L. G. Tabil, and S. Panigrahi. 2007. Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review. Journal of Polymers and the Environment 15 (1):25–33. doi:https://doi.org/10.1007/s10924-006-0042-3.
- Liew, F. K., S. Hamdan, M. R. Rahman, M. Rusop, J. C. H. Lai, M. F. Hossen, and M. M. Rahman. 2015. Synthesis and characterization of cellulose from green bamboo by chemical treatment with mechanical process. Journal of Chemistry 212158:1–6. doi:https://doi.org/10.1155/2015/212158.
- Lila, M. K., G. K. Saini, M. Kannan, and I. Singh. 2017. Effect of fiber type on thermal and mechanical behavior of epoxy based composites. Fibers and Polymers 18 (4):806–10. doi:https://doi.org/10.1007/s12221-017-1147-0.
- Lila, M. K., A. Singhal, S. S. Banwait, and I. Singh. 2018. A recyclability study of bagasse fiber reinforced polypropylene composites. Polymer Degradation and Stability 152:272–79. doi:https://doi.org/10.1016/j.polymdegradstab.2018.05.001.
- Liu, Y., and H. Hu. 2008. X-Ray diffraction study of bamboo fibers treated with NaOH. Fibers and Polymers 9 (6):735–39. doi:https://doi.org/10.1007/s12221-008-0115-0.
- Luz, S. M., A. R. Gonçalves, and A. P. Del’Arco. 2007. Mechanical behavior and microstructural analysis of sugarcane bagasse fibers reinforced polypropylene composites. Composites. Part A, Applied Science and Manufacturing 38 (6):1455–61. doi:https://doi.org/10.1016/j.compositesa.2007.01.014.
- Maache, M., A. Bezazi, S. Amroune, F. Scarpa, and A. Dufresne. 2017. Characterization of a novel natural cellulosic fiber from Juncus Effusus L. Carbohydrate Polymers 171:163–72. doi:https://doi.org/10.1016/j.carbpol.2017.04.096.
- Malainine, M. E., M. Mahrouz, and A. Dufresne. 2005. Thermoplastic nanocomposites based on cellulose microfibrils from opuntia ficus-indica parenchyma cell. Composites Science and Technology 65 (10):1520–26. doi:https://doi.org/10.1016/j.compscitech.2005.01.003.
- Malkapuram, R., V. Kumar, and Y. S. Negi. 2009. Recent development in natural fiber reinforced polypropylene composites. Journal of Reinforced Plastics and Composites 28 (10):1169–89. doi:https://doi.org/10.1177/0731684407087759.
- Manimaran, P., P. Senthamaraikannan, M. R. Sanjay, M. K. Marichelvam, and M. Jawaid. 2018. Study on characterization of furcraea foetida new natural fiber as composite reinforcement for lightweight applications. Carbohydrate Polymers 181:650–58. doi:https://doi.org/10.1016/j.carbpol.2017.11.099.
- Mazumdar, S. 2019. 2019 State of the industry report. Composite Manufacturing. http://www.compositesmanufacturingmagazine.com/2019/01/2019-state-of-the-industry-report/.
- McCool, J. I. 2014. Estimation and inference in sets of weibull samples. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability 228 (2):115–26. doi:https://doi.org/10.1177/1748006X13497707.
- Mitchell, R., C. M. Carr, M. Parfitt, J. C. Vickerman, and C. Jones. 2005. Surface chemical analysis of raw cotton fibres and associated materials. Cellulose 12 (6):629–39. doi:https://doi.org/10.1007/s10570-005-9000-9.
- Motaung, T. E., and R. D. Anandjiwala. 2015. Effect of alkali and acid treatment on thermal degradation kinetics of sugar cane bagasse. Industrial Crops and Products 74:472–77. doi:https://doi.org/10.1016/j.indcrop.2015.05.062.
- Moubarik, A., N. Grimi, and N. Boussetta. 2013. Structural and thermal characterization of moroccan sugar cane bagasse cellulose fibers and their applications as a reinforcing agent in low density polyethylene. Composites Part B: Engineering 52:233–38. doi:https://doi.org/10.1016/j.compositesb.2013.04.040.
- Nechyporchuk, O., M. N. Belgacem, and J. Bras. 2016. Production of cellulose nanofibrils: A review of recent advances. Industrial Crops and Products 93:2–25. doi:https://doi.org/10.1016/j.indcrop.2016.02.016.
- Pandey, V. C., K. Singh, R. P. Singh, and B. Singh. 2012. Naturally growing saccharum Munja L. on the fly ash lagoons: A potential ecological engineer for the revegetation and stabilization. Ecological Engineering 40:95–99. doi:https://doi.org/10.1016/j.ecoleng.2011.12.019.
- Pickering, K. L., M. G. Aruan Efendy, and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites. Part A, Applied Science and Manufacturing 83:98–112. doi:https://doi.org/10.1016/j.compositesa.2015.08.038.
- Pietak, A., S. Korte, E. Tan, A. Downard, and M. P. Staiger. 2007. Atomic force microscopy characterization of the surface wettability of natural fibres. Applied Surface Science 253 (7):3627–35. doi:https://doi.org/10.1016/j.apsusc.2006.07.082.
- Placet, V. 2009. Characterization of the thermo-mechanical behaviour of hemp fibres intended for the manufacturing of high performance composites. Composites. Part A, Applied Science and Manufacturing 40 (8):1111–18. doi:https://doi.org/10.1016/j.compositesa.2009.04.031.
- Ramanaiah, K., A. V. R. Prasad, and K. H. C. Reddy. 2011. Mechanical properties and thermal conductivity of typha angustifolia natural fiber-reinforced polyester composites. International Journal of Polymer Analysis and Characterization 16 (7):496–503. doi:https://doi.org/10.1080/1023666X.2011.598528.
- Rao, K. M. M., and K. M. Rao. 2007. Extraction and tensile properties of natural fibers: Vakka, date and bamboo. Composite Structures 77 (3):288–95. doi:https://doi.org/10.1016/j.compstruct.2005.07.023.
- Reddy, N., and Y. Yang. 2006. Properties of high-quality long natural cellulose fibers from rice straw. Journal of Agricultural and Food Chemistry 54 (21):8077–81. doi:https://doi.org/10.1021/jf0617723.
- Reddy, N., and Y. Yang. 2007. Preparation and characterization of long natural cellulose fibers from wheat straw. Journal of Agricultural and Food Chemistry 55 (21):8570–75. doi:https://doi.org/10.1021/jf071470g.
- Rong, M. Z., M. Q. Zhang, Y. Liu, G. C. Yang, and H. M. Zeng. 2001. The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites. Composites Science and Technology 61:1437–47. doi:https://doi.org/10.1016/S0266-3538(01)00046-X.
- Saheb, D. N., and J. P. Jog. 1999. Natural fiber polymer composites: A review. Advances in Polymer Technology 18 (4):351–63. doi:https://doi.org/10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X.
- Sanjay, M. R., P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep. 2018. Characterization and properties of natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production 172:566–81. doi:https://doi.org/10.1016/j.jclepro.2017.10.101.
- Saravanakumar, S. S., A. Kumaravel, T. Nagarajan, P. Sudhakar, and R. Baskaran. 2013. Characterization of a novel natural cellulosic fiber from prosopis juliflora bark. Carbohydrate Polymers 92 (2):1928–33. doi:https://doi.org/10.1016/j.carbpol.2012.11.064.
- Segal, L., J. J. Creely, A. E. Martin, and C. M. Conrad. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-Ray diffractometer. Textile Research Journal 29 (10):786–94. doi:https://doi.org/10.1177/004051755902901003.
- Seki, Y., M. Sarikanat, K. Sever, and C. Durmuşkahya. 2013. Extraction and properties of ferula communis (Chakshir) fibers as novel reinforcement for composites materials. Composites Part B: Engineering 44 (1):517–23. doi:https://doi.org/10.1016/j.compositesb.2012.03.013.
- Senthamaraikannan, P., and M. Kathiresan. 2018. Characterization of raw and alkali treated new natural cellulosic fiber from coccinia grandis.L. Carbohydrate Polymers 186:332–43. doi:https://doi.org/10.1016/j.carbpol.2018.01.072.
- Sgriccia, N., M. C. Hawley, and M. Misra. 2008. Characterization of natural fiber surfaces and natural fiber composites. Composites. Part A, Applied Science and Manufacturing 39 (10):1632–37. doi:https://doi.org/10.1016/j.compositesa.2008.07.007.
- Sharma, M., V. Mishra, N. Rau, and R. S. Sharma. 2011. Functionally diverse rhizobacteria of saccharum munja (a Native Wild Grass) colonizing abandoned morrum mine in Aravalli Hills (Delhi). Plant and Soil 341 (1–2):447–59. doi:https://doi.org/10.1007/s11104-010-0657-y.
- Silva, F. A., N. Chawla, and R. D. T. Filho. 2008. Tensile behavior of high Performance Natural (Sisal) fibers. Composites Science and Technology 68 (15–16):3438–43. doi:https://doi.org/10.1016/j.compscitech.2008.10.001.
- Singh, G. P., P. V. Madiwale, R. N. Jagtap, and R. V. Adivarekar. 2014. Extraction of fibers from saccharum munja grass and its application in composites. Journal of Applied Polymer Science 131 (19):1–8. doi:https://doi.org/10.1002/app.40829.
- Singhal, A. V., K. Debnath, I. Singh, and B. S. S. Daniel. 2016. Critical parameters affecting mechanical behavior of natural fiber reinforced plastics. Journal of Natural Fibers 13 (6):640–50. doi:https://doi.org/10.1080/15440478.2015.1102788.
- Sreekala, M. S., M. G. Kumaran, S. Joseph, M. Jacob, and S. Thomas. 2000. Oil palm fibre reinforced phenol formaldehyde composites: Influence of fibre surface modifications on the mechanical performance. Applied Composite Materials 7 (5–6):295–329. doi:https://doi.org/10.1023/A:1026534006291.
- Taib, R. M., A. Dody, and M. I. Z. Arifin. 2016. Surface characterization of alkali treated kenaf fibers by XPS and AFM. Key Engineering Materials 694:29–33. doi:10.4028/http://www.scientific.net/kem.694.29.
- Thomas, S., S. A. Paul, L. A. Pothan, and B. Deepa. 2011. Natural fibres: Structure, properties and applications. In Cellulose fibers: Bio- and nano-polymer composites, ed. S. Kalia, B. S. Kaith, and I. Kaur, 3–42. 1st ed. Berlin Heidelberg: Springer-Verlag. doi: https://doi.org/10.1007/978-3-642-17370-7.
- Thygesen, A., J. Oddershede, H. Lilholt, A. B. Thomsen, and K. Stahl. 2005. On the determination of crystallinity and cellulose content in plant fibres. Cellulose 12 (6):563–76. doi:https://doi.org/10.1007/s10570-005-9001-8.
- Truong, M., W. Zhong, S. Boyko, and M. Alcock. 2009. A comparative study on natural fibre density measurement. The Journal of the Textile Institute 100 (6):525–29. doi:https://doi.org/10.1080/00405000801997595.
- Truss, R. W., B. Wood, and R. Rasch. 2016. Quantitative surface analysis of hemp fibers using XPS, conventional and low voltage in-lens SEM. Journal of Applied Polymer Science 133 (8):1–9. doi:https://doi.org/10.1002/app.43023.
- Varshney, A. C., and K. L. Bhoi. 1986. Development of equipment for processing Munj (Saccharum Munja) fiber. Agricultural Wastes 17:1–6. doi:https://doi.org/10.1016/0141-4607(86)90143-5.
- Vasudevan, P., G. S. Gujral, and M. Madan. 1984. Saccharum Munja Roxb., An underexploited weed. Biomass 4:143–49. doi:https://doi.org/10.1016/0144-4565(84)90062-3.
- Vonk, C. G. 1973. Computerization of Ruland’s X-Ray method for determination of the crystallinity in polymers. Journal of Applied Crystallography 6 (2):148–52. doi:https://doi.org/10.1107/S0021889873008332.
- Wambua, P., J. Ivens, and I. Verpoest. 2003. Natural fibres: Can they replace glass in fibre reinforced plastics? Composites Science and Technology 63 (9):1259–64. doi:https://doi.org/10.1016/S0266-3538(03)00096-4.
- Yao, F., Q. Wu, Y. Lei, W. Guo, and Y. Xu. 2008. Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis. Polymer Degradation and Stability 93 (1):90–98. doi:https://doi.org/10.1016/j.polymdegradstab.2007.10.012.
- Yao, F., Q. Wu, and D. Zhou. 2009. Thermal decomposition of natural fibers: Global kinetic modeling with nonisothermal thermogravimetric analysis. Journal of Applied Polymer Science 114:834–42. doi:https://doi.org/10.1002/app.30439.
- Yao, Y., and S. Chen. 2013. The effects of fiber’s surface roughness on the mechanical properties of fiber-reinforced polymer composites. Journal of Composite Materials 47 (23):2909–23. doi:https://doi.org/10.1177/0021998312459871.
- Zaman, H. U., M. A. Khan, and R. A. Khan. 2013. Banana fiber-reinforced polypropylene composites: A study of the physico-mechanical properties. Fibers and Polymers 14 (1):121–26. doi:https://doi.org/10.1007/s12221-013-0121-8.