Effect of Tasar Silk Waste on the Mechanical Properties of Jute/Grewia Optiva Fibers Reinforced Epoxy Laminates

References

• Abdellaoui, H., H. Bensalah, M. Raji, D. Rodrigue, R. Bouhfid, and A. KacemQaiss. 2017. Laminated epoxy biocomposites based on clay and Jute fibers. Journal of Bionic Engineering 14 (2):379–89. doi:10.1016/S1672-6529(16)60406-7.
   Web of Science ®Google Scholar
• Amuthakkannan, P., V. Manikandan, J. T. W. Jappes, and M. Uthayakumar. 2013. Hybridization effect on mechanical properties of short basalt/Jute fiber-reinforced polyester composites. Science and Engineering of Composite Materials 20 (4):343–50. doi:10.1515/secm-2012-0144.
   Web of Science ®Google Scholar
• Ashworth, S., J. Rongong, P. Wilson, and J. Meredith. 2016. Mechanical and damping properties of resin transfer moulded Jute-carbon hybrid composites. Composites Part B: Engineering 105:60–66. doi:10.1016/j.compositesb.2016.08.019.
   Web of Science ®Google Scholar
• Boopalan, M., M. Niranjanaa, and M. J. Umapathy. 2013. Study on the mechanical properties and thermal properties of Jute and banana fiber reinforced epoxy hybrid composites. Composites Part B: Engineering 51:54–57. doi:10.1016/j.compositesb.2013.02.033.
   Web of Science ®Google Scholar
• Chattopadhyay, D., G. Mitra, and R. Munshi. 2015. Modern techniques for utilization of tasar silk wastes to convert yarn. Indian Journal of Natural Fibres 2 (1):41–49.
   Google Scholar
• Chaudhary, V., P. K. Bajpai, and S. Maheshwari. 2020. Effect of moisture absorption on the mechanical performance of natural fiber reinforced woven hybrid bio-composites. Journal of Natural Fibers 17 (1):84–100. doi:10.1080/15440478.2018.1469451.
   Web of Science ®Google Scholar
• Chen, S., L. Cheng, H. Huang, F. Zou, and H. P. Zhao. 2017. Fabrication and properties of poly (butylene succinate) biocomposites reinforced by waste silkworm silk fabric. Composites Part A: Applied Science and Manufacturing 95:125–31. doi:10.1016/j.compositesa.2017.01.004.
   Web of Science ®Google Scholar
• Das, S. 2017. Mechanical properties of waste paper/Jute fabric reinforced polyester resin matrix hybrid composites. Carbohydrate Polymers 172:60–67. doi:10.1016/j.carbpol.2017.05.036.
   PubMed Web of Science ®Google Scholar
• Deb, A., S. Das, A. Mache, and R. Laishram. 2017. A study on the mechanical behaviors of Jute-polyester composites. Procedia Engineering 173:631–38. doi:10.1016/j.proeng.2016.12.120.
   Google Scholar
• Ferreira, J. M., C. Capela, J. Manaia, and J. D. Costa. 2016. Mechanical properties of woven mat Jute/epoxy composites. Materials Research 19 (3):702–10. doi:10.1590/1980-5373-MR-2015-0422.
   Web of Science ®Google Scholar
• Gairola, S., S. Gairola, H. Sharma, and P. K. Rakesh. 2019. Impact behavior of pine needle fiber/pistachio shell filler based epoxy composite. Journal of Physics: Conference Series 1240 (1):012096.
   Google Scholar
• Gopakumar, D. A., A. R. Pai, Y. B. Pottathara, D. Pasquini, L. C. de Morais, H. P. S. Khalil, and A. Thomas. 2021. Flexible papers derived from polypyrrole deposited cellulose nanofibers for enhanced electromagnetic interference shielding in gigahertz frequencies. Journal of Applied Polymer Science 138 (16):50262. doi:10.1002/app.50262.
   Web of Science ®Google Scholar
• Gupta, K., and K. Gupta. 2012. Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials. Materials and Design 35:467–79. doi:10.1016/j.matdes.2011.09.010.
   Web of Science ®Google Scholar
• Gupta, M. K. 2018. Water absorption and its effect on mechanical properties of sisal composite. Journal of the Chinese Advanced Materials Society 6 (4):561–72. doi:10.1080/22243682.2018.1522600.
   Google Scholar
• Jabbar, A., J. Militký, B. M. Kale, S. Rwawiire, Y. Nawab, and V. Baheti. 2016. Modeling and analysis of the creep behavior of Jute/green epoxy composites incorporated with chemically treated pulverized nano/micro Jute fibers. Industrial Crops and Products 84:230–40. doi:10.1016/j.indcrop.2015.12.052.
   Web of Science ®Google Scholar
• Jansen, K. M. B., M. F. Zhang, L. J. Ernst, D. K. Vu, and L. Weiss. 2020. Effect of temperature and humidity on moisture diffusion in an epoxy moulding compound material. Microelectronics Reliability 107:113596. doi:10.1016/j.microrel.2020.113596.
   Web of Science ®Google Scholar
• Jawaid, M., H. A. Khalil, and A. A. Bakar. 2011. Woven hybrid composites: Tensile and flexural properties of oil palm-woven Jute fibres-based epoxy composites. Materials Science and Engineering: A 528 (15):5190–95. doi:10.1016/j.msea.2011.03.047.
   Web of Science ®Google Scholar
• Joy, J., E. George, S. Thomas, and S. Anas. 2020. Effect of filler loading on polymer chain confinement and thermomechanical properties of epoxy/boron nitride (h-BN) nanocomposites. New Journal of Chemistry 44 (11):4494–503. doi:10.1039/C9NJ05834F.
   Web of Science ®Google Scholar
• Karakoti, A., J. R. Aseer, P. K. Dasan, and M. Rajesh. 2020. Micro cellulose Grewia optiva fiber-reinforced polymer composites: Relationship between structural and mechanical properties. Journal of Natural Fibers 1–12. doi:10.1080/15440478.2020.1800549.
   Google Scholar
• Kumar, J., V. Kumar, I. Singh, and P. K. Rakesh. 2020. Joining behaviour of polymeric composites fabricated using agriculture waste as fillers. Journal of Adhesion Science and Technology. doi:10.1080/01694243.2020.1855909.
   Web of Science ®Google Scholar
• Kumar, S., V. K. Patel, K. K. S. Mer, B. Gangil, T. Singh, and G. Fekete. 2019. Himalayan natural fiber-reinforced epoxy composites: Effect of Grewia optiva/bauhinia vahlii fibers on physico-mechanical and dry sliding wear behavior. Journal of Natural Fibers 18:1–11.
   Google Scholar
• Li, G., J. Liu, Z. Zheng, X. Wang, and D. L. Kaplan. 2015. Structural mimetic silk fiber‐reinforced composite scaffolds using multi‐angle fibers. Macromolecular Bioscience 15 (8):1125–33. doi:10.1002/mabi.201400502.
   PubMed Web of Science ®Google Scholar
• Liew, F. K., S. Hamdan, M. Rahman, and M. Rusop. 2017. Thermomechanical properties of Jute/bamboo cellulose composite and its hybrid composites: The effects of treatment and fiber loading. Advances in Materials Science and Engineering 2017. https://doi.org/10.1155/2017/8630749
   Google Scholar
• Mahir, F. I., K. N. Keya, B. Sarker, K. M. Nahiun, and R. A. Khan. 2019. A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites. Materials Engineering Research 1 (2):86–97. doi:10.25082/MER.2019.02.007.
   Google Scholar
• Mohammed, A. R., M. N. Atiqah, D. A. Gopakumar, M. R. Fazita, S. Rizal, D. Hermawan, and H. A. Khalil. 2020. Influence of layering pattern of modified kenaf fiber on thermomechanical properties of epoxy composites. Progress in Rubber, Plastics and Recycling Technology 36 (1):47–62. doi:10.1177/1477760619895010.
   Web of Science ®Google Scholar
• Morton, W. E., and J. W. S. Hearle. 2008. Physical properties of textile fibres. Elsevier.Woodhead Publishing Limited: England ISBN: 978-1-84569-220-9.
   Google Scholar
• Murasing, K. K., M. Kumar, and A. Kumar. 2021. Effect of altitude on the mechanical strength of Grewia optiva fiber in Garhwal Himalaya, India. Journal of Natural Fibers 1–10. doi:10.1080/15440478.2021.1929652.
   Web of Science ®Google Scholar
• Naik, N., B. Shivamurthy, B. H. S. Thimappa, A. Govil, P. Gupta, and R. Patra. 2019. Enhancing the mechanical properties of Jute fiber reinforced green composites varying cashew nut shell liquid composition and using mercerizing process. Materials Today: Proceedings 19:434–39.
   Google Scholar
• Nam, T. H., S. Ogihara, H. Nakatani, S. Kobayashi, and J. I. Song. 2012. Mechanical and thermal properties and water absorption of Jute fiber reinforced poly (butylene succinate) biodegradable composites. Advanced Composite Materials 21 (3):241–58. doi:10.1080/09243046.2012.723362.
   Web of Science ®Google Scholar
• Padinjakkara, A., G. Scarinzi, G. Santagata, M. Malinconico, J. M. Razal, S. Thomas, and N. V. Salim. 2020. Enhancement of adhesive strength of epoxy/carboxyl-terminated poly (butadiene-co-acrylonitrile) nanocomposites using waste hemp fiber-derived cellulose nanofibers. Industrial & Engineering Chemistry Research 59 (23):10904–13. doi:10.1021/acs.iecr.0c01053.
   Web of Science ®Google Scholar
• Pereira, A. C., S. N. Monteiro, F. S. de Assis, F. M. Margem, F. S. Da Luz, and F. de oliveira braga. 2017. Charpy impact tenacity of epoxy matrix composites reinforced with aligned Jute fibers. Journal of Materials Research and Technology 6 (4):312–16. doi:10.1016/j.jmrt.2017.08.004.
   Google Scholar
• Petrucci, R., C. Santulli, D. Puglia, F. Sarasini, L. Torre, and J. M. Kenny. 2013. Mechanical characterization of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion. Materials and Design 49:728–35. doi:10.1016/j.matdes.2013.02.014.
   Web of Science ®Google Scholar
• Pinto, M., V. B. Chalivendra, Y. K. Kim, and A. F. Lewis. 2016. Improving the strength and service life of Jute/epoxy laminar composites for structural applications. Composite Structures 156:333–37. doi:10.1016/j.compstruct.2015.10.005.
   Web of Science ®Google Scholar
• Pokhriyal, M., L. Prasad, P. K. Rakesh, and H. P. Raturi. 2018. Influence of fiber loading on physical and mechanical properties of Himalayan nettle fabric reinforced polyester composite. Materials Today: Proceedings 5 (9):16973–82.
   Google Scholar
• Prasob, P. A., and M. Sasikumar. 2018. Static and dynamic behavior of Jute/epoxy composites with ZnO and TiO2 fillers at different temperature conditions. Polymer Testing 69:52–62. doi:10.1016/j.polymertesting.2018.04.040.
   Web of Science ®Google Scholar
• Praveen, K. M., S. Thomas, Y. Grohens, M. Mozetič, I. Junkar, G. Primc, and M. Gorjanc. 2016. Investigations of plasma induced effects on the surface properties of lignocellulosic natural coir fibres. Applied Surface Science 368:146–56. doi:10.1016/j.apsusc.2016.01.159.
   Web of Science ®Google Scholar
• Puglia, D., J. Biagiotti, and J. M. Kenny. 2005. A review on natural fibre-based composites—Part II: Application of natural reinforcements in composite materials for automotive industry. Journal of Natural Fibers 1 (3):23–65. doi:10.1300/J395v01n03_03.
   Google Scholar
• Raghavendra, G., S. Ojha, S. K. Acharya, and S. K. Pal. 2014. Jute fiber reinforced epoxy composites and comparison with the glass and neat epoxy composites. Journal of Composite Materials 48 (20):2537–47. doi:10.1177/0021998313499955.
   Web of Science ®Google Scholar
• Ramesh, M., K. Palanikumar, and K. H. Reddy. 2013. Mechanical property evaluation of sisal–Jute–glass fiber reinforced polyester composites. Composites Part B: Engineering 48:1–9. doi:10.1016/j.compositesb.2012.12.004.
   Web of Science ®Google Scholar
• Ranakoti, L., M. K. Gupta, and P. K. Rakesh. 2019. Analysis of mechanical and tribological behavior of wood flour filled glass fiber reinforced epoxy composite. Materials Research Express 6 (8):085327. doi:10.1088/2053-1591/ab2375.
   Web of Science ®Google Scholar
• Ribeiro, M., A. Fiúza, A. Ferreira, M. Dinis, A. Meira Castro, J. Meixedo, and M. Alvim. 2016. Recycling approach towards sustainability advance composite materials industry. Recycling 1 (1):178–93. doi:10.3390/recycling1010178.
   Google Scholar
• Sathish, K. S., A. V. Suresh, M. Nagamadhu, and M. Krishna. 2017. The effect of alkaline treatment on their properties of Jute fiber mat and its vinyl ester composites. Materials Today: Proceedings 4 (2):3371–79.
   Google Scholar
• Sever, K., M. Sarikanat, Y. Seki, G. Erkan, E. Üh, and S. Erden. 2012. Surface treatments of Jute fabric: The influence of surface characteristics on Jute fabrics and mechanical properties of Jute/polyester composites. Industrial Crops and Products 35 (1):22–30. doi:10.1016/j.indcrop.2011.05.020.
   Web of Science ®Google Scholar
• Singha, A. S., and V. K. Thakur. 2008. Synthesis and characterization of Grewia optiva fiber-reinforced PF-based composites. International Journal of Polymeric Materials 57 (12):1059–74. doi:10.1080/00914030802257800.
   Web of Science ®Google Scholar
• Sivakandhan, C., G. Murali, N. Tamiloli, and L. Ravikumar. 2020. Studies on mechanical properties of sisal and Jute fiber hybrid sandwich composite. Materials Today: Proceedings 21:404–07.
   Google Scholar
• Srivastava, C. M., R. Purwar, and A. P. Gupta. 2019. Enhanced potential of biomimetic, silver nanoparticles functionalized Antheraea mylitta (Tasar) silk fibroin nanofibrous mats for skin tissue engineering. International Journal of Biological Macromolecules 130:437–53. doi:10.1016/j.ijbiomac.2018.12.255.
   PubMed Web of Science ®Google Scholar
• Yallew, T. B., P. Kumar, and I. Singh. 2014. Sliding wear properties of Jute fabric reinforced polypropylene composites. Procedia Engineering 97:402–11. doi:10.1016/j.proeng.2014.12.264.
   Google Scholar
• Zamri, M. H., H. M. Akil, A. A. Bakar, Z. A. M. Ishak, and L. W. Cheng. 2012. Effect of water absorption on pultruded Jute/glass-fibre-reinforced unsaturated polyester hybrid composites. Journal of Composite Materials 46 (1):51–61. doi:10.1177/0021998311410488.
   Web of Science ®Google Scholar