Investigation on Interfacial Behavior of Modified Basalt Textile Reinforced Concrete Using Acoustic Emission Technique

References

• Behzadnasab, M., S. M. Mirabedini, K. Kabiri, and S. Jamali. 2011. Corrosion performance of epoxy coatings containing silane treated ZrO2 nanoparticles on mild steel in 3.5% NaCl solution. Corrosion Science 53 (1):89–98. doi:10.1016/j.corsci.2010.09.026.
   Web of Science ®Google Scholar
• Chen, C. L., Y. He, G. Q. Xiao, Y. Q. Wu, Z. He, and F. Zhong. 2018. Zirconia doped in carbon fiber by electrospinning method and improve the mechanical properties and corrosion resistance of epoxy. Progress in Organic Coatings 125:420–31. doi:10.1016/j.porgcoat.2018.09.027.
   Web of Science ®Google Scholar
• Chen, X. F., Y. S. Zhang, H. B. Huo, and Z. S. Wu. 2020. Study of high tensile strength of natural continuous basalt fibers. Journal of Natural Fibers 17 (2):214–22. doi:10.1080/15440478.2018.1477087.
   Web of Science ®Google Scholar
• Chen, Y. D., Y. Yang, Z. H. Chu, X. G. Chen, L. Wang, Z. Liu, Y. C. Dong, D. R. Yan, J. X. Zhang, and Z. L. Kang. 2018. Microstructure and properties of Al2O3-ZrO2 composite coatings prepared by air plasma spraying. Applied Surface Science 431:93–100. doi:10.1016/j.apsusc.2017.04.073.
   Web of Science ®Google Scholar
• Chen, Y. Z., and S. J. Chen. 2020. Acoustic emission characteristics of bond-slip for bfrp concrete at different loading rates. Russian Journal of Nondestructive Testing 56 (12):1030–41. doi:10.1134/S1061830921010046.
   Web of Science ®Google Scholar
• Das, B., P. Brodard, and P. P. Bandyopadhyay. 2019. Raman spectroscopy assisted residual stress measurement of plasma sprayed and laser remelted zirconia splats and coatings. Surface & Coatings Technology 378. doi:10.1016/j.surfcoat.2019.124920.
   Google Scholar
• Dou, X. M., D. Mohan, C. U. Pittman, and S. Yang. 2012. Remediating fluoride from water using hydrous zirconium oxide. Chemical Engineering Journal 198-199:236–45. doi:10.1016/j.cej.2012.05.084.
   Web of Science ®Google Scholar
• Feng, G. Y., X. Y. Wang, D. T. Zhang, X. L. Xiao, and K. Qian. 2020. Effect of resin coating and sand gluing on interface properties between polypropylene fibers and concrete. Fibers and Polymers 21 (7):1573–82. doi:10.1007/s12221-020-9536-1.
   Web of Science ®Google Scholar
• Gusmano, G., G. Montesperelli, M. Rapone, G. Padeletti, A. Cusma, S. Kaciulis, A. Mezzi, and R. Di Maggio. 2007. Zirconia primers for corrosion resistant coatings. Surface & Coatings Technology 201 (12):5822–28. doi:10.1016/j.surfcoat.2006.10.036.
   Web of Science ®Google Scholar
• Hamdi, K., G. Moreau, and Z. Aboura. 2021. Digital image correlation, acoustic emission and in-situ microscopy in order to understand composite compression damage behavior. Composite Structures 258. doi:10.1016/j.compstruct.2020.113424.
   Google Scholar
• Hao, B., T. Förster, E. Mäder, and P. C. Ma. 2017. Modification of basalt fibre using pyrolytic carbon coating for sensing applications. Composites Part A-Applied Science and Manufacturing 101:123–28. doi:10.1016/j.compositesa.2017.06.010.
   Web of Science ®Google Scholar
• Hong, M.-S., Y. Park, T. Kim, K. Kim, and J.-G. Kim. 2020. Polydopamine/carbon nanotube nanocomposite coating for corrosion resistance. Journal of Materiomics 6 (1):158–66. doi:10.1016/j.jmat.2020.01.004.
   Web of Science ®Google Scholar
• Huang, X. H., K. Shi, J. Q. Yan, S. Lin, Y. J. Li, X. L. Jia, and X. P. Yang. 2020. High performance epoxy composites prepared using recycled short carbon fiber with enhanced dispersibility and interfacial bonding through polydopamine surface-modification. Composites Part B-Engineering 193. doi:10.1016/j.compositesb.2020.107987.
   Google Scholar
• Hughes, E., S. Das, N. V. Engelen, and D. Lawn. 2021. Concrete girders retrofitted with basalt fibre fabric – A feasibility study using lab tests and field application. Engineering Structures 238. doi:10.1016/j.engstruct.2021.112223.
   Google Scholar
• Iorio, M., M. L. Santarelli, G. G. Gaitano, and J. Gonzalez-Benito. 2018. Surface modification and characterization of basalt fibers as potential reinforcement of concretes. Applied Surface Science 427:1248–56. doi:10.1016/j.apsusc.2017.08.196.
   Web of Science ®Google Scholar
• Jia, M. H., W. Z. Xie, K. J. Yu, and K. Qian. 2020b. Analyses on impact behaviour and reinforcement mechanism of basalt fiber and textile reinforced cement-based composite materials. Journal of the Textile Institude. doi:10.1080/00405000.2020.1848112.
   Google Scholar
• Jia, M. H., X. L. Xiao, and K. Qian. 2018. Research progress in basalt fiber and its reinforced cement-based composites. Bulletin of the Chinese Ceramic Society 37 (11):3467–74.
   Google Scholar
• Jia, M. H., X. L. Xiao, X. F. Lu, G. Y. Feng, and K. Qian. 2020a. Influence of stacking sequence of basalt-fiber grilles on mechanical properties for textile-reinforced concrete and theoretical prediction. Textile Research Journal 90 (17–18):1931–47. doi:10.1177/0040517520903416.
   Web of Science ®Google Scholar
• Kafodya, I., and F. Okonta. 2021. Effect of fibre surface coating on the mechanical properties of natural fibre-reinforced soil. International Journal of Geotechnical Engineering 15 (3):338–48. doi:10.1080/19386362.2018.1542557.
   Web of Science ®Google Scholar
• Lee, H., S. M. Dellatore, W. M. Miller, and P. B. Messersmith. 2007. Mussel-Inspired surface chemistry for multifunctional coatings. Science 318 (5849):426–30. doi:10.1126/science.1147241.
   PubMed Web of Science ®Google Scholar
• Lee, J. J., J. Y. Song, and H. D. Kim. 2014. Chemical stability of basalt fiber in alkaline solution. Fibers and Polymers 15 (11):2329–34. doi:10.1007/s12221-014-2329-7.
   Web of Science ®Google Scholar
• Li, S., Y. M. Zhang, and Y. F. Zhou. 2012. Preparation and characterization of sol–gel derived zirconia coated carbon fiber. Composites Science and Technology 206 (23):4720–24.
   Google Scholar
• Liu, J. X., M. R. Chen, J. P. Yang, and Z. S. Wu. 2020. Study on mechanical properties of basalt fibers superior to E-glass fibers. Journal of Natural Fibers 1–13. doi:10.1080/15440478.2020.1764438.
   Google Scholar
• Lubos, P., R. Cajk, L. Topolar, P. Mateckova, V. Bilek, and O. Sucharda. 2019. Measurement and utilization of acoustic emission for the analysis and monitoring of concrete slabs on the subsoil. Periodica Polytechnica-Civil Engineering 63 (2):608–20.
   Web of Science ®Google Scholar
• Monaldo, E., F. Nerilli, and G. Vairo. 2019. Basalt-based fiber-reinforced materials and structural applications in civil engineering. Composite Structures 214:246–63. doi:10.1016/j.compstruct.2019.02.002.
   Web of Science ®Google Scholar
• Monticeli, F. M., D. Daou, O. Pekovic, A. Simonovic, H. J. C. Voorwald, and M. O. H. Cioffi. 2020. FEA simulation and experimental validation of mode I and II delamination at the carbon/glass/epoxy hybrid interface: Physical-based interpretation. Composites Communication 22. doi:10.1016/j.coco.2020.100532.
   Google Scholar
• Ren, N., and B. Van der Bruggen. 2020. Mussel-inspired polydopamine modification of polymeric membranes for the application of water and wastewater treatment: A review. Chemical Engineering Research & Design 157:195–214. doi:10.1016/j.cherd.2020.03.011.
   Web of Science ®Google Scholar
• Park, Y. M., A. Desai, A. Salleo, and L. Jimison. 2013. Solution-Processable zirconium oxide gate dielectrics for flexible organic field effect transistors operated at low voltages. Chemistry of Materials 25 (13):2571–79. doi:10.1021/cm303547a.
   Web of Science ®Google Scholar
• Prasad, L., A. Saini, and V. Kumar. 2021. Mechanical performance of jute and basalt fiber geo-grid-reinforced epoxy hybrid composite material. Journal of Natural Fibers 18 (5):294–704. doi:10.1080/15440478.2019.1645789.
   Web of Science ®Google Scholar
• Quagliarini, E., A. Scalbi, F. Monni, and S. Lenci. 2017. A Novel and Sustainable Application of Basalt Fibers for Strengthening Unreinforced Masonry Walls. Journal of Natural Fibers 14 (1):97–111. doi:10.1080/15440478.2016.1163763.
   Web of Science ®Google Scholar
• Ralegaonkar, R., H. Gavali, P. Aswath, and S. Abolmaali. 2018. Application of chopped basalt fibers in reinforced mortar: A review. Construction and Building Materials 164:589–602. doi:10.1016/j.conbuildmat.2017.12.245.
   Web of Science ®Google Scholar
• Scheffler, C., T. Foerster, E. Maeder, G. Heinrich, S. Hempel, and V. Mechtcherine. 2009. Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by Weibull distribution function. Journal of Non-Crystalline Solids 355 (52–54):2588–95. doi:10.1016/j.jnoncrysol.2009.09.018.
   Web of Science ®Google Scholar
• Shanmugam. L., X. M. Feng, and J. L. Yang. 2019. Enhanced interphase between thermoplastic matrix and UHMWPE fiber sized with CNT-modified polydopamine coating. Composites Science and Technology 174:212–220.
   Web of Science ®Google Scholar
• Song, B., Z. D. Liu, D. Pan, T. T. Wang, L. Wang, B. B. Dong, and Z. H. Guo. 2021. Layer-by-layer constructing interface with rigid-flexible transition structure for improving interfacial adhesion of PBO fiber composites. Composites Communication 23. doi:10.1016/j.coco.2020.100466.
   Google Scholar
• Tiwari, S. K., J. Adhikary, T. B. Singh, and R. Singh. 2009. Preparation and characterization of sol–gel derived yttria doped zirconia coatings on AISI 316L. Thin Solid Films 517 (16):4502–08. doi:10.1016/j.tsf.2008.12.025.
   Web of Science ®Google Scholar
• Wang, Q. X., Y. N. Ding, and R. Norbert. 2020. Investigation on the alkali resistance of basalt fiber and its textile in different alkaline environments. Construction and Building Materials 272. doi:10.1016/j.conbuildmat.2020.121670.
   Google Scholar
• Wei, B., H. L. Cao, and S. H. Song. 2010. Tensile behavior contrast of basalt and glass fibers after chemical treatment. Materials & Design 31 (9):4244–50. doi:10.1016/j.matdes.2010.04.009.
   Web of Science ®Google Scholar
• Wei, B., H. L. Cao, and S. H. Song. 2011. Surface modification and characterization of basalt fibers with hybrid sizings. Composites Part A-Applied Science and Manufacturing 42 (1):22–29. doi:10.1016/j.compositesa.2010.09.010.
   Web of Science ®Google Scholar
• Wen, B., and C. F. Wan. 2020. Experimental study on the bond degradation of basalt fiber reinforced polymer grid-concrete interface under fatigue loading. Construction and Building Materials 6. doi:10.1016/j.conbuildmat.2020.121383.
   Google Scholar
• Wu, Z. S., H. Yuan, and H. D. Niu. 2002. Stress transfer and fracture propagation in different kinds of adhesive joints. Journal of Engineering Mechanics 128 (5):563–73. doi:10.1061/(ASCE)0733-9399(2002)128:5(562).
   Web of Science ®Google Scholar
• Yuan, H., J. G. Teng, R. Seracino, Z. S. Wu, and J. Yao. 2004. Full-range behavior of FRP-to-concrete bonded joints. Engineering Structures 26 (5):553–65. doi:10.1016/j.engstruct.2003.11.006.
   Web of Science ®Google Scholar
• Zhang, H. P., W. Han, J. Tavakoli, Y. P. Zhang, X. Y. Lin, Y. H. Lu, Y. Ma, and Y. Tang. 2019. Understanding interfacial interactions of polydopamine and glass fiber and their enhancement mechanisms in epoxy-based laminates. Composites Part A: Applied Science and Manufacturing 116:62–71. doi:10.1016/j.compositesa.2018.10.024.
   Web of Science ®Google Scholar
• Zhang, L., Z. Li, and D. Y. Wang. 2020. Polydopamine-assisted strategies for preparation of fire-safe polymeric materials: A review. European Polymer Journal 138. doi:10.1016/j.eurpolymj.2020.109973.
   Google Scholar
• Zhang, W., G. J. Ji, A. M. Bu, and B. Zhang. 2015. Corrosion and tribological behavior of ZrO 2 films prepared on stainless steel surface by the Sol–Gel method. ACS Applied Materials & Interface 7 (51):28264–72. doi:10.1021/acsami.5b07915.
   PubMed Web of Science ®Google Scholar