The Impact of Chemical Treatment of Cellulosic Fibers on Surface Properties and Matrix/reinforcement Interfacial Adhesion

References

• Adhikary, K. B., S. Pang, and M. P. Staiger. 2008. Dimensional stability and mechanical behavior of wood-plastic composites based on recycled and virgin high-density polyethylene (HDPE). Composites Part B: Engineering 39 (5):807–15. doi:10.1016/j.compositesb.2007.10.005.
   Web of Science ®Google Scholar
• Akhavan, A., S. M. H. Alireza, Shafaatian, and F. Rajabipour. 2012. Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars. Cement and Concrete Research 42 (2):313–20. doi:10.1016/j.cemconres.2011.10.002.
   Web of Science ®Google Scholar
• Baccouch, W., A. Ghith, I. Yalcin-Enis, H. Sezgin, W. Miled, X. Legrand, and F. Faten. 2020. Enhancement of fiber-matrix interface of recycled cotton fibers reinforced epoxy composite for improved mechanical properties. Materials Research Express 7 (1):015340. doi:10.1088/2053-1591/ab6c04.
   Web of Science ®Google Scholar
• Behary, N., A. Perwuelz, C. Campagne, D. Lecouturier, P. Dhulster, and A. S. Mamede. 2012. Adsorption of surfactin produced from Bacillus subtilis using nonwoven PET (polyethylene terephthalate) fibrous membranes functionalized with chitosan. Colloids and Surfaces. B, Biointerfaces 90 (1):137–43. doi:10.1016/j.colsurfb.2011.10.009.
   PubMedGoogle Scholar
• Bigand, V., C. Pinel, D. D. S. Perez, F. Rataboul, P. Huber, and M. Petit-Conil. 2011. Cationisation of galactomannan and xylan hemicelluloses. Carbohydrate Polymers 85 (1):138–48. doi:10.1016/j.carbpol.2011.02.005.
   Web of Science ®Google Scholar
• Burrola-Núñez, H., P. J. Herrera-Franco, D. E. Rodríguez-Félix, H. Soto-Valdez, and T. J. Madera-Santana. 2018. Surface modification and performance of jute fibers as reinforcement on polymer matrix: An overview. Journal of Natural Fibers Madera-Santana 16 (7):944–60. doi:10.1080/15440478.2018.1441093.
   Web of Science ®Google Scholar
• Chokshi, S., V. Parmar, P. Gohil, and V. Chaudhary. 2020. Chemical composition and mechanical properties of natural fibers. Journal of Natural Fibers 1–12. doi:10.1080/15440478.2020.1848738.
   Google Scholar
• Delgado, Á. V., F. González-Caballero, R. J. Hunter, L. K. Koopal, and J. Lyklema. 2007. Measurement and interpretation of electrokinetic phenomena. Journal of Colloid and Interface Science 309 (2):194–224. doi:10.1016/j.jcis.2006.12.075.
   PubMed Web of Science ®Google Scholar
• Devaux, E., S. Bourbigot, and A. E. Achari. 2002. Crystallization behavior of PA‐6 clay nanocomposite hybrid. Journal of Applied Polymer Science 86 (10):2416–23. doi:10.1002/app.10920.
   Web of Science ®Google Scholar
• Dweib, M. A., B. Hu, A. O’Donnell, H. W. Shenton, and R. P. Wool. 2004. All natural composite sandwich beams for structural applications. Composite Structures 63 (2):147–57. doi:10.1016/S0263-8223(03)00143-0.
   Web of Science ®Google Scholar
• Elaissi, A., H. Alibi, M. Jabli, and A. Ghith. 2020. Development of Abrasives from Non-woven Based on Used Textiles. Journal of Natural Fibers 1–15. doi:10.1080/15440478.2020.1807439.
   Web of Science ®Google Scholar
• Furtos, G., L. Silaghi-Dumitrescu, P. Pascuta, C. Sarosi, and K. Korniejenko. 2021. Mechanical properties of wood fiber reinforced geopolymer composites with sand addition. Journal of Natural Fibers 18 (2):285–96. doi:10.1080/15440478.2019.1621792.
   Web of Science ®Google Scholar
• Ghezal, I., A. Moussa, I. B. Marzoug, A. El-Achari, C. Campagne, and F. Sakli. 2020. Development and Surface State Characterization of a Spacer Waterproof Breathable Fabric. Fibers and Polymers 21 (4):910–20. doi:10.1007/s12221-020-8936-6.
   Web of Science ®Google Scholar
• Golebiewski, J., and A. Galeski. 2007. Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA. Composites Science and Technology 67 (15–16):3442–47. doi:10.1016/j.compscitech.2007.03.007.
   Web of Science ®Google Scholar
• Goriparthi, B. K., K. N. S. Suman, and N. M. Rao. 2012. Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites. Composites. Part A, Applied Science and Manufacturing 43 (10):1800–08. doi:10.1016/j.compositesa.2012.05.007.
   Web of Science ®Google Scholar
• Grundke, K., H. J. Jacobasch, F. Simon, and S. T. Schneider. 1995. Physico-chemical properties of surface-modified polymers. Journal of Adhesion Science and Technology 9 (3):327–50. doi:10.1163/156856195X00536.
   Web of Science ®Google Scholar
• Guo, L., C. Campagne, A. Perwuelz, and F. Leroux. 2009. Zeta potential and surface physico-chemical properties of atmospheric air-plasma-treated polyester fabrics. Textile Research Journal 79 (15):1371–77. doi:10.1177/0040517509103950.
   Web of Science ®Google Scholar
• Hara, K., T. Matsushita, and K. Nagata. 2013. In-situ X-ray Transmission Observation of Carbothermic Reduction of Magnetite Powder and Macroscopic Agglomeration of Reduced Iron. ISIJ International 53 (6):1010–19. doi:10.2355/isijinternational.53.1010.
   Web of Science ®Google Scholar
• Herrera-Franco, P. J., and A. Valadez-González. 2004. Mechanical properties of continuous natural fiber-reinforced polymer composites. Composites. Part A, Applied Science and Manufacturing 35 (3):339–45. doi:10.1016/j.compositesa.2003.09.012.
   Web of Science ®Google Scholar
• Hong, C. K., I. Hwang, N. Kim, D. H. Park, B. S. Hwang, and C. Nah. 2008. Mechanical properties of silanized jute–polypropylene composites. Journal of Industrial and Engineering Chemistry 14 (1):71–76. doi:10.1016/j.jiec.2007.07.002.
   Web of Science ®Google Scholar
• ISO (International Organization for Standardization) 1975. Textile fibers – Some methods of sampling for testing.
   Google Scholar
• ISO (International Organization for Standardization) 2018. Determination of resistance to water penetration
   Google Scholar
• Jabli, M., T. A. Saleh, N. Sebeia, N. Tka, and R. Khiari. 2017. Dimethyl diallyl ammonium chloride and diallylamin Co-polymer modified bio-film derived from palm dates for the adsorption of dyes. Scientific Reports 7 (1):1–12. doi:10.1038/s41598-017-14327-7.
   PubMedGoogle Scholar
• John, M. J., and R. D. Anandjiwala. 2008. Recent developments in chemical modification and characterization of natural fiber‐reinforced composites. Polymer Composites 29 (2):187–207. doi:10.1002/pc.20461.
   Web of Science ®Google Scholar
• Kim, J. Y., and H. M. Choi. 2014. Cationization of periodate-oxidized cotton cellulose with choline chloride. Cellul Chem Technol 48 (1–2):25–32. Accessed September, 2021.http://scholarworks.bwise.kr/ssu/handle/2018.sw.ssu/10156
   Web of Science ®Google Scholar
• Liao, J., S. Zhang, and X. Tang. 2020. Sound absorption of hemp fibers (Cannabis Sativa L.) based nonwoven fabrics and composites: A review. Journal of Natural Fibers 1–13. doi:10.1080/15440478.2020.1764453.
   Web of Science ®Google Scholar
• Litim, N., A. Baffoun, F. Khoffi, M. Hamdaoui, S. Ben Abdessalem, and B. Durand. 2017. Effect of finishing resins on mechanical and surface properties of cotton Denim fabrics. The Journal of the Textile Institute 108 (11):1863–70. doi:10.1080/00405000.2017.1297015.
   Web of Science ®Google Scholar
• Loof, D., M. Hiller, H. Oschkinat, and K. Koschek. 2016. Quantitative and qualitative analysis of surface modified cellulose utilizing TGA-MS. Materials 9 (6):415. doi:10.3390/ma9060415.
   Web of Science ®Google Scholar
• Maqsood, H. S., U. Bashir, M. Zubair, J. Wiener, and J. Militky. 2017. Cationization of cellulose fibers for composites. The Journal of the Textile Institute 108 (8):1302–07. doi:10.1080/00405000.2016.1245579.
   Web of Science ®Google Scholar
• Morán, J. I., V. A. Alvarez, V. P. Cyras, and A. Vázquez. 2008. Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose 15 (1):149–59. doi:10.1007/s10570-007-9145-9.
   Web of Science ®Google Scholar
• Mori, S., S. Charca, E. Flores, and H. Savastano Jr. 2021. Physical and Thermal Properties of Novel Native Andean Natural Fibers. Journal of Natural Fibers 18 (4):475–91. doi:10.1080/15440478.2019.1629150.
   Web of Science ®Google Scholar
• Mukhopadhyay, A., and V. K. Midha. 2008. A review on designing the waterproof breathable fabrics part II: Construction and suitability of breathable fabrics for different uses. Journal of Industrial Textiles 38 (1):17–41. doi:10.1177/1528083707082166.
   Web of Science ®Google Scholar
• Ni, X., A. Dong, X. Fan, Q. Wang, Y. Yu, and A. Cavaco-Paulo. 2015. Jute/polypropylene composites: Effect of enzymatic modification on thermo-mechanical and dynamic mechanical properties. Fibers and Polymers 16 (10):2276–83. doi:10.1007/s12221-015-5475-7.
   Web of Science ®Google Scholar
• O’donnell, A., M. A. Dweib, and R. P. Wool. 2004. Natural fiber composites with plant oil-based resin. Composites Science and Technology 64 (9):1135–45. doi:10.1016/j.compscitech.2003.09.024.
   Web of Science ®Google Scholar
• Patanaik, A., and R. Anandjiwala. 2009. Some studies on water permeability of nonwoven fabrics. Textile Research Journal 79 (2):147–53. doi:10.1177/0040517508091313.
   Web of Science ®Google Scholar
• Ray, D., and B. K. Sarkar. 2001. Characterization of alkali-treated jute fibers for physical and mechanical properties. Journal of Applied Polymer Science 80 (7):1013–20. doi:10.1002/app.1184.
   Web of Science ®Google Scholar
• Sawsen, C., K. Fouzia, B. Mohamed, and G. Moussa. 2015. Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite. Construction and Building Materials 79:229–35. doi:10.1016/j.conbuildmat.2014.12.091.
   Web of Science ®Google Scholar
• Solarski, S., S. Benali, M. Rochery, E. Devaux, M. Alexandre, F. Monteverde, and P. Dubois. 2005. Synthesis of a polyurethane/clay nanocomposite used as coating: Interactions between the counterions of clay and the isocyanate and incidence on the nanocomposite structure. Journal of Applied Polymer Science 95 (2):238–44. doi:10.1002/app.21254.
   Web of Science ®Google Scholar
• Sreekala, M. S., M. G. Kumaran, and S. Thomas. 1997. Oil palm fibers: Morphology, chemical composition, surface modification, and mechanical properties. Journal of Applied Polymer Science 66 (5):821–35. doi:10.1002/(SICI)1097-4628(19971031)66:5<821::AID-APP2>3.0.CO;2-X.
   Web of Science ®Google Scholar
• Tarbuk, A., A. M. Grancaric, and M. Leskovac. 2014. Novel cotton cellulose by cationisation during the mercerisation process—part 1: Chemical and morphological changes. Cellulose 21 (3):2167–79. doi:10.1007/s10570-014-0245-z.
   Web of Science ®Google Scholar
• Tka, N., M. Jabli, T. A. Saleh, and G. A. Salman. 2018. Amines modified fibers obtained from natural Populus tremula and their rapid biosorption of Acid Blue 25. Journal of Molecular Liquids 250:423–32. doi:10.1016/j.molliq.2017.12.026.
   Web of Science ®Google Scholar
• Trovati, G., E. A. Sanches, S. C. Neto, Y. P. Mascarenhas, and G. O. Chierice. 2010. Characterization of polyurethane resins by FTIR, TGA, and XRD. Journal of Applied Polymer Science 115 (1):263–68. doi:10.1002/app.31096.
   Web of Science ®Google Scholar
• Vijay, R., D. L. Singaravelu, A. Vinod, M. R. Sanjay, and S. Siengchin. 2019. Characterization of alkali-treated and untreated natural fibers from the stem of parthenium hysterophorus. Journal of Natural Fibers. doi:10.1080/15440478.2019.1612308.
   Web of Science ®Google Scholar
• Wahab, M. A., H. Boubakri, S. Jellali, and N. Jedidi. 2012. Characterization of ammonium retention processes onto Cactus leaves fibers using FTIR, EDX and SEM analysis. Journal of Hazardous Materials 241:101–09. doi:10.1016/j.jhazmat.2012.09.018.
   PubMed Web of Science ®Google Scholar
• Yang, H., R. Yan, H. Chen, D. H. Lee, and C. Zheng. 2007. Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86 (12–13):1781–88. doi:10.1016/j.fuel.2006.12.013.
   Web of Science ®Google Scholar
• Zafeiropoulos, N. E., P. E. Vickers, C. A. Baillie, and J. F. Watts. 2003. An experimental investigation of modified and unmodified flax fibers with XPS, ToF-SIMS and ATR-FTIR. Journal of Materials Science 38 (19):3903–14. doi:10.1023/A:1026133826672.
   Web of Science ®Google Scholar
• Zhang, H., R. Ming, G. Yang, Y. Li, Q. Li, and H. Shao. 2015. Influence of alkali treatment on flax fiber for use as reinforcements in polylactide stereocomplex composites. Polymer Engineering & Science 55 (11):2553–58. doi:10.1002/pen.24147.
   Web of Science ®Google Scholar
• Zhao, J., W. Xiuwen, J. Hu, Q. Liu, D. Shen, and R. Xiao. 2014. Thermal degradation of softwood lignin and hardwood lignin by TG-FTIR and Py-GC/MS. Polymer Degradation and Stability 108:133–38. doi:10.1016/j.polymdegradstab.2014.06.006.
   Web of Science ®Google Scholar