Utilization of Municipal Solid Waste Incineration Fly Ash for Non-Bearing Masonry Units Containing Coconut Fiber

References

• Andrew, R. M. 2018. Global CO2 emissions from cement production. Earth System Science Data 10 (1):195–217. doi:10.5194/essd-10-195-2018.
   Web of Science ®Google Scholar
• Arulrajah, A., T. A. Kua, S. Horpibulsuk, C. Phetchuay, C. Suksiripattanapong, and Y. J. Du. 2016. Strength and microstructure evaluation of recycled glass-fly ash geopolymer as low-carbon masonry units. Construction and Building Materials 114:400–06. doi:10.1016/j.conbuildmat.2016.03.123.
   Web of Science ®Google Scholar
• Arulrajah, A., T. A. Kua, C. Suksiripattanapong, S. Horpibulsuk, and J. S. Shen. 2017. Compressive strength and microstructural properties of spent coffee grounds-bagasse ash based geopolymers with slag supplements. Journal of Cleaner Production 162:1491–501. doi:10.1016/j.jclepro.2017.06.171.
   Web of Science ®Google Scholar
• Asasutjarit, C., J. Hirunlabh, J. Khedari, S. Charoenvai, B. Zeghmati, and U. C. Shin. 2007. Development of coconut coir-based lightweight cement board. Construction and Building Materials 21 (2):277–88. doi:10.1016/j.conbuildmat.2005.08.028.
   Web of Science ®Google Scholar
• Basar, H. M., and N. D. Aksoy. 2012. The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete. Construction and Building Materials 35:508–15. doi:10.1016/j.conbuildmat.2012.04.078.
   Web of Science ®Google Scholar
• Chauhan, M. S., S. Mittal, and B. Mohanty. 2008. Performance evaluation of silty sand subgrade reinforced with fly ash and fibre. Geotextiles and Geomembranes 26:429–35. doi:10.1016/j.geotexmem.2008.02.001.
   Web of Science ®Google Scholar
• Chindaprasirt, C., T. Chareerat, and V. Sirivivatnanon. 2007. Workability and strength of coarse high calcium fly ash geopolymer. Cement and Concrete Composites 29:224–29. doi:10.1016/j.cemconcomp.2006.11.002.
   Web of Science ®Google Scholar
• Chindaprasirt, P., C. Jaturapitakkul, W. Chalee, and U. Rattanasak. 2009. Comparative study on the characteristics of fly ash and bottom ash geopolymers. Waste Management 29 (2):539–43. doi:10.1016/j.wasman.2008.06.023.
   PubMed Web of Science ®Google Scholar
• Cho, B. H., B. H. Nam, J. An, and H. Youn. 2020. Municipal Solid Waste Incineration (MSWI) ashes as construction materials—a review. Materials 13:3143. doi:10.3390/ma13143143.
   PubMed Web of Science ®Google Scholar
• Danso, H., D. B. Martinson, M. Ali, and J. Williams. 2015. Effect of fibre aspect ratio on mechanical properties of soil building blocks. Construction and Building Materials 83:314–19. doi:10.1016/j.conbuildmat.2015.03.039.
   Web of Science ®Google Scholar
• Duxson, P., A. Fernández-Jiménez, J. L. Provis, G. C. Lukey, A. Palomo, and J. S. J. van Deventer. 2007. Geopolymer technology: The current state of the art. Journal of Materials Science 42:2917–33. doi:10.1007/s10853-006-0637-z.
   Web of Science ®Google Scholar
• Furtos, G., L. Silaghi-Dumitrescu, P. Pascuta, S. Sarosi, and K. Korniejenko. 2021. Mechanical properties of wood fiber reinforced geopolymer composites with sand addition. Journal of Natural Fibers 18 (2):285–96. doi:10.1080/15440478.2019.1621792.
   Web of Science ®Google Scholar
• Horpibulsuk, S., V. Munsrakesta, A. Udomchai, A. Chinkulkijniwat, and A. Arulrajah. 2014. Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash. Construction and Building Materials 178:175–82. doi:10.1016/j.conbuildmat.2014.08.033.
   Google Scholar
• Horpibulsuk, S., C. Suksiripattanapong, W. Samingthong, R. Rachan, and A. Arulrajah. 2016. Durability against wetting–drying cycles of water treatment sludge-fly ash geopolymer and water treatment sludge-cement and silty clay-cement systems. Journal of Materials in Civil Engineeing 28:1. doi:10.1061/(ASCE)MT.1943-5533.0001351.
   Web of Science ®Google Scholar
• Jamshidi, R. J., C. B. Lake, and C. L. Barnes. 2015. Evaluating impact resonance testing as a tool for predicting hydraulic conductivity and strength changes in cement-stabilized soils. Journal of Materials in Civil Engineeing 27:12. doi:10.1061/(ASCE)MT.1943-5533.0001318.
   Web of Science ®Google Scholar
• Khan, M., and M. Ali. 2018. Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber. Construction and Building Materials 182:703–15. doi:10.1016/j.conbuildmat.2018.06.150.
   Web of Science ®Google Scholar
• Lertwattanaruk, P., and A. Suntijitt. 2015. Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications. Construction and Building Materials 94:664–69. doi:10.1016/j.conbuildmat.2015.07.154.
   Web of Science ®Google Scholar
• Li, R., B. Zhang, Y. Wang, Y. Zhao, and F. Li. 2019. Leaching potential of stabilized fly ash from the incineration of municipal solid waste with a new polymer. Journal of Environmental Management 232:286–94. doi:10.1016/j.jenvman.2018.11.036.
   PubMed Web of Science ®Google Scholar
• Li, X. G., Z. L. Liu, Y. Lv, L. X. Cai, D. B. Jiang, W. G. Jiang, and S. Jian. 2018. Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete. Construction and Building Materials 178:175–82. doi:10.1016/j.conbuildmat.2018.05.147.
   Web of Science ®Google Scholar
• Phetchuay, C., S. Horpibulsuk, A. Arulrajah, C. Suksiripattanpong, and A. Udomchai. 2016. Development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer. Applied Clay Science 127-128:134–42. doi:10.1016/j.clay.2016.04.005.
   Web of Science ®Google Scholar
• Phetchuay, C., S. Horpibulsuk, C. Suksiripattanpong, A. Chinkulkijniwat, A. Arulrajah, and M. M. Disfani. 2014. Calcium carbide residue: Alkaline activator for clay-fly ash geopolymer. Construction and Building Materials 69:285–94. doi:10.1016/j.conbuildmat.2014.07.018.
   Web of Science ®Google Scholar
• Punurai, W., W. Kroehong, A. Saptamongkol, and P. Chindaprasirt. 2018. Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste. Construction and Building Materials 186:62–70. doi:10.1016/j.conbuildmat.2018.07.115.
   Web of Science ®Google Scholar
• Sata, V., A. Sathonsaowaphak, and P. Chindaprasirt. 2012. Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack. Cement and Concrete Composites 34 (5):700–08. doi:10.1016/j.cemconcomp.2012.01.010.
   Web of Science ®Google Scholar
• Shekhawat, P., G. Sharma, and R. M. Singh. 2019. Strength behavior of alkaline activated eggshell powder and fly ash geopolymer cured at ambient temperature. Construction and Building Materials 223:1112–22. doi:10.1016/j.conbuildmat.2019.07.325.
   Web of Science ®Google Scholar
• Singh, G., and R. Siddique. 2012. Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS). Construction and Building Materials 28:421–26. doi:10.1016/j.conbuildmat.2011.08.087.
   Web of Science ®Google Scholar
• Sukmak, P., S. Horppibulsuk, S. L. Shen, P. Chindaprasirt, and C. Suksiripattqanapong. 2013. Factors influencing strength development in clay-fly ash geopolymer. Construction and Building Materials 40:1125–36. doi:10.1016/j.conbuildmat.2013.05.104.
   Web of Science ®Google Scholar
• Suksiripattanapong, C., S. Horpibulsuk, S. Boongrasan, A. Udomchai, A. Chinkulkijniwat, and A. Arulrajah. 2015b. Unit weight, strength and microstructure of a water treatment sludge–fly ash lightweight cellular geopolymer. Construction and Building Materials 94:807–16. doi:10.1016/j.conbuildmat.2015.07.091.
   Web of Science ®Google Scholar
• Suksiripattanapong, C., S. Horpibulsuk, P. Chanprasert, P. Sukmak, and A. Arulrajah. 2015a. Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludge. Construction and Building Materials 82:20–30. doi:10.1016/j.conbuildmat.2015.02.040.
   Web of Science ®Google Scholar
• Suksiripattanapong, C., K. Krosoongnern, J. Thumrongvut, P. Sukontasukkul, S. Horpibulsuk, and P. Chindaprasirt. 2020. Properties of cellular lightweight high calcium bottom ash-Portland cement geopolymer mortar. Case Studies in Construction Materials 12. doi:10.1016/j.cscm.2020.e00337.
   Google Scholar
• Suksiripattanapong, C., T. A. Kua, A. Arulrajah, F. Maghool, and S. Horpibulsuk. 2017. Strength and microstructure properties of spent coffee grounds stabilized with rice husk ash and slag geopolymers. Construction and Building Materials 146:312–20. doi:10.1016/j.conbuildmat.2017.04.103.
   Web of Science ®Google Scholar
• Tabyang, W., C. Suksiripattanapong, C. Phetchuay, C. Laksanakit, and N. Chusilp. 2021. Evaluation of municipal solid waste incineration fly ash based geopolymer for stabilised recycled concrete aggregate as road material. Road Materials and Pavement Design 1–12. doi:10.1080/14680629.2021.1959385.
   Web of Science ®Google Scholar
• Tan, T., B. B. K. Huat, P. Sangeeth, V. Anggraini, S. K. Shukla, and H. Nahazanan. 2021. Strength behavior of fly ash-stabilized soil reinforced with coir fibers in alkaline environment. Journal of Natural Fibers 11:1556–69. doi:10.1080/15440478.2019.1691701.
   Google Scholar
• Thanushan, K., Y. Yogananth, P. Sangeeth, J. G. Coonghe, and N. Sathiparan. 2021. Strength and durability characteristics of coconut fibre reinforced earth cement blocks. Journal of Natural Fibers 18:773–88. doi:10.1080/15440478.2019.1652220.
   Web of Science ®Google Scholar
• Vargas, P., O. Restrepo-Baena, and J. I. Tobón. 2014. Microstructural analysis of interfacial transition zone (ITZ) and its impact on the compressive strength of lightweight concretes. Construction and Building Materials 137:381–89. doi:10.1016/j.conbuildmat.2017.01.101.
   Google Scholar
• Wan, S., X. Zhou, M. Zhou, Y. Han, Y. Chen, J. Geng, T. Wang, S. Xu, Z. Q. Qiu, and H. Hou. 2018. Hydration characteristics and modeling of ternary system of municipal solid wastes incineration fly ash-blast furnace slag-cement. Construction and Building Materials 180:154–66. doi:10.1016/j.conbuildmat.2018.05.277.
   Web of Science ®Google Scholar
• Wongsa, A., K. Boonserm, C. Waisurasingha, V. Sata, and P. Chindaprasirt. 2017. Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix. Journal of Cleaner Production 148:49–59. doi:10.1016/j.jclepro.2017.01.147.
   Web of Science ®Google Scholar
• Yan, K., F. Gao, H. Sun, D. Ge, and S. Yang. 2019b. Effects of municipal solid waste incineration fly ash on the characterization of cement-stabilized macadam. Construction and Building Materials 207:181–89. doi:10.1016/j.conbuildmat.2019.02.048.
   Web of Science ®Google Scholar
• Yan, K., L. Li, K. Zheng, and D. Ge. 2019a. Research on properties of bitumen mortar containing municipal solid waste incineration fly ash. Construction and Building Materials 218:657–66. doi:10.1016/j.conbuildmat.2019.05.151.
   Web of Science ®Google Scholar