Extraction and Characterization of Natural CASCABELA Thevetia Bast Fibers: A Potential Candidate as Reinforcement in Epoxy Composites

References

• Arthanarieswaran, V. P., A. Kumaravel, and S. S. Saravanakumar. 2015. “Characterization of New Natural Cellulosic Fiber from Acacia Leucophloea Bark.” International Journal of Polymer Analysis and Characterization 20 (4): 367–16. https://doi.org/10.1080/1023666X.2015.1018737.
   Web of Science ®Google Scholar
• Ayadi, R., M. Hanana, R. Mzid, L. Hamrouni, M. L. Khouja, and A. Salhi Hanachi. 2016. “Hibiscus Cannabinus L.–Kenaf: A Review Paper.” Journal of Natural Fibers 14 (4): 1–19. https://doi.org/10.1080/15440478.2016.1240639.
   Web of Science ®Google Scholar
• Aziz, S. H., and M. P. Ansell. 2004. “The Effect of Alkalization and Fibre Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites.” Composite Science & Technology 64 (9): 1219–1230. https://doi.org/10.1016/j.compscitech.2003.10.001.
   Web of Science ®Google Scholar
• Baseri, J. R., P. N. Palanisamy, and P. Sivakumar. 2012. “Preparation and Characterization of Activated Carbon from Thevetia Peruviana for the Removal of Dyes from Textile Waste Water.” Advances in Applied Science Research 3 (1): 377–383.
   Google Scholar
• Batra, S. K. 1985. “Other long vegetable fibers.” In Handbook of Fiber Science and technology”, Vol. IV: Fiber Chemistry, edited by M. Lewin and E. M. Pearce, 727–808. New York: Marcel Dekker.
   Google Scholar
• Behera, A., J. Dehury, and M. M. Thaware. 2019. “A Comparative Study on Laminated and Randomly Oriented Luffa-Kevlar Reinforced Hybrid Composites.” Journal of Natural Fibers 16 (2): 237–244. https://doi.org/10.1080/15440478.2017.1414653.
   Web of Science ®Google Scholar
• Belaadi, A., A. Bezazi, M. Bourchak, F. Scarpa, and C. Zhu. 2014. “Thermo-Chemical and Statistical Mechanical Properties of Natural Sisal Fibres.” Composites Part B Engineering 67:481–489. https://doi.org/10.1016/j.compositesb.2014.07.029.
   Web of Science ®Google Scholar
• Belopukhov, S., I. Dmitrevskaya, E. Grishina, S. Zaitsev, and I. Uschapovsky. 2017. “Effects of Humic Substances Obtained from Shives on Flax Yield Characteristics.” Journal of Natural Fibers 14 (1): 126–133. https://doi.org/10.1080/15440478.2016.1167648.
   Web of Science ®Google Scholar
• Betiku, E., and S. O. Ajala. 2014. “Modeling and Optimization of Thevetia Peruviana (Yellow Oleander) Oil Biodiesel Synthesis via Musa Paradisiacal (Plantain) Peels as Heterogeneous Base Catalyst: A Case of Artificial Neural Network Vs. Response Surface Methodology.” Industrial Crops and Products 53:314–322. https://doi.org/10.1016/j.indcrop.2013.12.046.
   Web of Science ®Google Scholar
• Bledzki, A. K., and J. Gassan. 1999. “Composites Reinforced with Cellulose Based Fibers.” Progress in Polymer Science 24 (2): 221–274. https://doi.org/10.1016/S0079-6700(98)00018-5.
   Web of Science ®Google Scholar
• Chen, H., C. Ferrari, M. Angiuli, J. Yao, C. Raspi, and E. Bramanti. 2010. “Qualitative and Quantitative Analysis of Wood Samples by Fourier Transform Infrared Spectroscopy and Multivariate Analysis.” Carbohydrate Polymer 82 (3): 772–778. https://doi.org/10.1016/j.carbpol.2010.05.052.
   Web of Science ®Google Scholar
• Dehury, J., J. R. Mohanty, S. Nayak, P. Samal, S. K. Kuntia, C. Malla, S. D. Mohanty, and J. Mohapatra. 2021. “Comprehensive Characterization of Date Palm Petiole Fiber Reinforced Epoxy Composites: Effect of Fiber Treatment and Loading on Various Properties.” Journal of Natural Fibers 19 (4): 9457–9470. https://doi.org/10.1080/15440478.2021.1982834.
   Google Scholar
• Deka, D. C., and S. Basumatary. 2011. “High Quality Biodiesel from Yellow Oleander (Thevetia Peruviana) Seed Oil.” Biomass and Bioenergy 35 (5): 1797–1803. https://doi.org/10.1016/j.biombioe.2011.01.007.
   Web of Science ®Google Scholar
• Erdogan, U. H., Y. Seki, G. Aydoğdu, B. Kutlu, and A. Akşit. 2016. “Effect of Different Surface Treatments on the Properties of Jute.” Journal of Natural Fibers 13 (2): 158–171. https://doi.org/10.1080/15440478.2014.1002149.
   Web of Science ®Google Scholar
• Gonzalez, A. V., J. M. Cervantes, R. Olayo, and P. J. Herrera-Franco. 1999. “Effect of Fiber Surface Treatment on the Fiber–Matrix Bond Strength of Natural Fiber Reinforced Composites.” Composite Part B Engineering 30 (3): 309–320. https://doi.org/10.1016/S1359-8368(98)00054-7.
   Web of Science ®Google Scholar
• Kabir, M., M. H. Wang, K. T. Lau, and F. Cardon. 2012. “Chemical Treatments on Plant Based Natural Fibre Reinforced Polymer Composites: An Overview.” Composites Part B 43 (7): 2883–2892. https://doi.org/10.1016/j.compositesb.2012.04.053.
   Web of Science ®Google Scholar
• Kabir, M. M., H. Wang, K. T. Lau, and F. Cardona. 2013. “Tensile Properties of Chemically Treated Hemp Fibres as Reinforcement for Composites.” Composites Part B Engineering 53:362–368. https://doi.org/10.1016/j.compositesb.2013.05.048.
   Web of Science ®Google Scholar
• Kubo, S., and J. F. Kadla. 2005. “Hydrogen Bonding in Lignin: A Fourier Transform Infrared Model Compound Study.” Biomacromolecules 6 (5): 2815–2821. https://doi.org/10.1021/bm050288q.
   PubMed Web of Science ®Google Scholar
• Liu, J., Y. Song, G. Han, Y. Han, Y. Zhang, and W. Jiang. 2018. “The Dimensional Distribution of Kenaf and Apocynum Fibers.” Journal of Natural Fibers 17 (5): 738–744. https://doi.org/10.1080/15440478.2018.1532857.
   Web of Science ®Google Scholar
• Marichelvam, M. K., P. Manimaran, A. Verma, M. R. Sanjay, S. Siengchin, K. Kandakodeeswaran, and M. Geetha. 2021. “A Novel Palm Sheath and Sugarcane Bagasse Fiber Based Hybrid Composites for Automotive Applications: An Experimental Approach.” Polymer Composites 42 (1): 512–521. https://doi.org/10.1002/pc.25843.
   Web of Science ®Google Scholar
• Mayandi, K., N. Rajini, P. Pitchipoo, J. T. Winowlin Jappes, and A. Varada Rajulu. 2016. “Extraction and Characterization of New Natural Lignocellulosic Fiber Cyperus Pangorei.” International Journal of Polymer Analysis and Characterization 21 (2): 175–183. https://doi.org/10.1080/1023666X.2016.1132064.
   Web of Science ®Google Scholar
• Mohanty, J. R., S. N. Das, H. C. Das, and S. K. Swain. 2014. “Effect of Chemically Modified Date Palm Leaf Fiber on Mechanical, Thermal and Rheological Properties of Polyvinylpyrrolidone.” Fibers and Polymers 15 (5): 1062–1070. https://doi.org/10.1007/s12221-014-1062-6.
   Web of Science ®Google Scholar
• Moni, M., P. Gogoi, D. Chandra, and D. Kumar. 2014. “Synthesis and Characterization of Yellow Oleander (Thevetia Peruviana) Seed Oil-Based Alkyd Resin.” Industrial Crops and Products 52:721–728. https://doi.org/10.1016/j.indcrop.2013.11.012.
   Web of Science ®Google Scholar
• Moran, J. I., V. A. Alvarez, V. P. Cyras, and A. Vazquez. 2008. “Extraction of Cellulose and Preparation of Nanocellulose from Sisal Fibers.” Cellulose 15 (1): 149–159. https://doi.org/10.1007/s10570-007-9145-9.
   Web of Science ®Google Scholar
• Nayak, S., and J. R. Mohanty. 2018a. “Influence of Chemical Treatment on Tensile Strength, Water Absorption, Surface Morphology, and Thermal Analysis of Areca Sheath Fibers.” Journal of Natural Fibers 16 (4): 589–599. https://doi.org/10.1080/15440478.2018.1430650.
   Web of Science ®Google Scholar
• Nayak, S., and J. R. Mohanty. 2018b. “Study of Mechanical, Thermal, and Rheological Properties of Areca Fiber-Reinforced Polyvinyl Alcohol Composite.” Journal of Natural Fibers 16 (5): 688–701. https://doi.org/10.1080/15440478.2018.1432000.
   Web of Science ®Google Scholar
• Owa, A. F., I. O. Oladele, A. A. Adediran, and J. A. Omotoyinbo. 2021. “Thevetia Peruviana Oil-Based Composites Reinforced with Short Sisal Fibers: Fabrication and Properties.” Journal of Chemical Technology and Metallurgy 56 (2): 289–295.
   Google Scholar
• Priyadharshini, G. S., T. Velmurugan, I. Suyambulingam, M. R. Sanjay, S. Siengchin, and R. Vishnu. 2023. “Characterization of Cellulosic Plant Fiber Extracted from Waltheria Indica Linn. Stem.” Biomass Conversion and Biorefinery. Advance online publication. https://doi.org/10.1007/s13399-023-04270-1.
   Web of Science ®Google Scholar
• Raghunathan, V., J. D. J. Dhilip, G. Subramanian, H. Narasimhan, C. Baskar, A. Murugesan, A. Khan, and A. A. Otaibi. 2022. “Influence of Chemical Treatment on the Physico-Mechanical Characteristics of Natural Fibers Extracted from the Barks of Vachellia Farnesiana.” Journal of Natural Fibers 19 (13): 5065–5075. https://doi.org/10.1080/15440478.2021.1875353.
   Web of Science ®Google Scholar
• Ramesh, M., C. Deepa, M. Tamil Selvan, L. Rajeshkumar, D. Balaji, and V. Bhuvaneswari. 2021. “Mechanical and Water Absorption Properties of Calotropis Gigantea Plant Fibers Reinforced Polymer Composites.” Materials Today: Proceedings 46:3367–3372. https://doi.org/10.1016/j.matpr.2020.11.480.
   Google Scholar
• Rao, H. J., S. Singh, and P. J. Ramulu. 2022. “Characterization of a Careya Arborea Bast Fiber as Potential Reinforcement for Light Weight Polymer Biodegradable Composites.” Journal of Natural Fibers 20 (1): 2128147. https://doi.org/10.1080/15440478.2022.2128147.
   Web of Science ®Google Scholar
• Ravikumar, P., G. Rajeshkumar, P. Manimegalai, K. R. Sumesh, M. R. Sanjay, and S. Siengchin. 2022. “Delamination and Surface Roughness Analysis of Jute/Polyester Composites Using Response Surface Methodology: Consequence of Sodium Bicarbonate Treatment.” Journal of Industrial Textiles 51 (1S): 360S–377S. https://doi.org/10.1177/15280837221077040.
   Google Scholar
• Reddy, B. M., Y. V. M. Reddy, B. C. M. Reddy, and R. M. Reddy. 2020. “Mechanical, Morphological, and Thermogravimetric Analysis of Alkali-Treated Cordia-Dichotoma Natural Fiber Composites.” Journal of Natural Fibers 17 (5): 759–768. https://doi.org/10.1080/15440478.2018.1534183.
   Web of Science ®Google Scholar
• Sahoo, S. K., J. R. Mohanty, S. Nayak, and B. Behera. 2019. “Chemical Treatment on Rattan Fibers: Durability, Mechanical, Thermal, and Morphological Properties.” Journal of Natural Fibers 18 (11): 1762–1771. https://doi.org/10.1080/15440478.2019.1697995.
   Web of Science ®Google Scholar
• Sahu, S. B. B. P. J., S. Nayak, S. Sahu, and M. K. Roul. 2022. “Calotropis Gigantea Bast Fiber Based Epoxy Composites for Automotive Application: An Experimental Study.” Polymer Composites 44 (1): 252–260. https://doi.org/10.1002/pc.27042.
   Web of Science ®Google Scholar
• Santhosh, J., N. Balanarasimman, R. Chandrasekar, and S. Raja. 2014. “Study of Properties of Banana Fiber Reinforced Composites.” International Journal of Research in Engineering and Technology 3 (11): 144–150. https://doi.org/10.15623/ijret.2014.0311022.
   Google Scholar
• Saravanakumar, S. S., A. Kumaravel, T. Nagarajan, and I. Ganesh Moorthy. 2014. “Investigation of Physico-Chemical Properties of Alkali-Treated Prosopis juliflora Fibers.” International Journal of Polymer Analysis and Characterization 19 (4): 309–317. https://doi.org/10.1080/1023666X.2014.902527.
   Web of Science ®Google Scholar
• Segal, L., J. J. Creely, A. E. J. Martin, and C. M. Conrad. 1959. “An Empirical Method of Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer.” Textile Research Journal 29 (10): 786–794. https://doi.org/10.1177/004051755902901003.
   Google Scholar
• Senthamaraikannan, P., S. S. Saravanakumar, V. P. Arthanarieswaran, and P. Sugumaran. 2016. “Physico Chemical Properties of New Cellulosic Fibers from Bark of Acacia Planifrons.” International Journal of Polymer Analysis and Characterization 21 (3): 207–213. https://doi.org/10.1080/1023666X.2016.1133138.
   Web of Science ®Google Scholar
• Soleimani, M., L. G. Tabil, I. Oguocha, and J. Fung. 2018. “Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites.” Journal of Polymers and the Environment 26 (2): 532–542. https://doi.org/10.1007/s10924-017-0967-8.
   Web of Science ®Google Scholar
• Sumesh, K. R., G. Saikrishnan, P. Pandiyan, L. Prabhu, S. Gokulkumar, A. K. Priya, P. Spatenka, and S. Krishna. 2022. “The Influence of Different Parameters in Tribological Characteristics of Pineapple/Sisal/TiO2 Filler Incorporation.” Journal of Industrial Textiles 51 (5S): 8626S–8644S. https://doi.org/10.1177/15280837211022614.
   Google Scholar
• Taha, I., L. Steuernagel, and G. Ziegmann. 2007. “Optimization of the Alkali Treatment Process of Date Palm Fibres for Polymeric Composites.” Composite Interfaces 14 (7–9): 669–684. https://doi.org/10.1163/156855407782106528.
   Web of Science ®Google Scholar
• Thiruchitrambalam, M., A. Athijayamani, S. Sathiyamurthy, and A. S. A. Thaheer. 2010. “A Review on the Natural Fiber-Reinforced Polymer Composites for the Development of Roselle Fiber-Reinforced Polyester Composite.” Journal of Natural Fibers 7 (4): 307–323. https://doi.org/10.1080/15440478.2010.529299.
   Web of Science ®Google Scholar
• Tibolla, H., F. M. Pelissari, and F. C. Menegalli. 2014. “Cellulose Nanofibers Produced from Banana Peel by Chemical and Enzymatic Treatment.” LWT - Food Science and Technology 59 (2): 1311–1318. https://doi.org/10.1016/j.lwt.2014.04.011.
   Web of Science ®Google Scholar
• Usman, M. A., I. Momohjimoh, and A. S. Adeniyi. 2021. “Characterization of Thevetia Peruviana (Yellow Oleander) Shell Ash Powder as Possible Filler in Polymer Composites.” Mechanics of Advanced Composite Structures 8 (1): 109–117.
   Google Scholar
• Vardhini, K. J. V., R. Murugan, C. T. Selvi, and R. Surjit. 2016. “Optimisation of Alkali Treatment of Banana Fibers on Lignin Removal.” Indian Journal of Fibre Textile Research 41:156–160.
   Web of Science ®Google Scholar
• Xu, F., F. Tesso, T. Dowell, W. Wang, and D. Wang. 2013. “Qualitative and Quantitative Analysis of Lignocellulosic Biomass Using Infrared Techniques: A Mini-Review.” Applied Energy 104:801–809. https://doi.org/10.1016/j.apenergy.2012.12.019.
   Web of Science ®Google Scholar