Metalworking Fluid Mist—Strategies to Reduce Exposure: A Comparison of New and Old Transmission Case Transfer Lines

REFERENCES

• McCoy , J. S. 1994 . “ Introduction: Tracing the historical development of metalworking fluids ” . In Metalworking Fluids , Edited by: Byers , J. P. 1 – 23 . New York : Marcel Dekker .
   Google Scholar
• Tucker , K. H. 1994 . “ Metalforming applications. In ” . In Metalworking Fluids , Edited by: Byers , J.P. 135 – 163 . New York : Marcel Dekker .
   Google Scholar
• Occupational Safety and Health Administration (OSHA) Metalworking Fluids Standards Advisory Committee (MWFSAC) . 1999 . “Final Report of the OSHA Metalworking Fluids Standards Advisory Committee,” submitted to Charles Jeffress, Assistant Secretary of Labor ” . In OSHA , Edited by: Maura , J. Sheehan . chairperson and editor . July 15, (Accessed 6/7/05). http://www.osha.gov/SLTC/metalworkingfluids/mwf_finalreport.html
   Google Scholar
• Occupational Safety and Health Administration (OSHA) . Metalworking Fluids: Safety and Health Best Practices Manual (Accessed 6/7/05) http://www.osha.gov/SLTC/metalworkingfluids/metalworkingfluids_manual.html December 2001
   Google Scholar
• Childers , J. C. 1994 . “ The chemistry of metalworking fluids. In ” . In Metalworking Fluids , Edited by: Byers , J.P. 165 – 189 . New York : Marcel Dekker .
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 1998 . Criteria for a Recommended Standard—Occupational Exposure to Metalworking Fluids , Cincinnati , Ohio : NIOSH . (NIOSH 98-102).
   Google Scholar
• Rossmoore , L. and Rossmoore , H. 1994 . “ Metalworking fluid microbiology ” . In Metalworking Fluids , Edited by: Byers , J.P. 247 – 271 . New York : Marcel Dekker .
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): . 1983 . National Occupational Exposure Survey (NOES) , 1981 – 1983 . Cincinnati , Ohio : NIOSH .
   Google Scholar
• Alomar , A. 1994 . Occupational skin disease from cutting fluids . Dermatol. Clin , 12 : 537 – 546 .
   PubMed Web of Science ®Google Scholar
• deBoer , E. M. , Bruynzeel , D. P. and van Ketal , W. G. 1988 . Dyshidrotic eczema as an occupational dermatitis in metal workers . Contact Dermat. , 19 : 184 – 188 .
   PubMed Web of Science ®Google Scholar
• deBoer , E. M. , Bruynzeel , D. P. and van Ketal , W. G. 1989 . Dermatoses in metal workers. I. Irritant contact dermatitis . Contact Dermat. , 20 : 212 – 218 .
   PubMed Web of Science ®Google Scholar
• deBoer , E. M. , Bruynzeel , D. P. and van Ketal , W. G. 1989 . Dermatoses in metal workers. II. Allergic contact dermatitis . Contact Derma , 20 : 280 – 286 .
   PubMed Web of Science ®Google Scholar
• Eisen , E. , Tolbert , P. , Monson , R. and Smith , T. 1992 . Mortality studies of machining fluid exposure in the automobile industry: I. A standardized mortality analysis . Am J. Ind. Med. , 22 : 809 – 824 .
   PubMed Web of Science ®Google Scholar
• Eisen , E. , Holcroft , C. , Greaves , I. , Wegman , D. , Woskie , S. and Monson , R. 1997 . A strategy to reduce healthy worker effect in a cross-sectional study of asthma and metalworking fluids . Am J. Ind. Med. , 31 : 671 – 677 .
   PubMed Web of Science ®Google Scholar
• Bernstein , D. I. , Lummus , Z. Z. and Santilli , G. 1995 . Machine operator's lung. A hypersensitivity pneumonitis disorder associated with exposure to metalworkting fluid aerososl . Chest , 108 ( 3 ) : 636 – 641 .
   Web of Science ®Google Scholar
• Rose , C. , Robins , T. and Harkaway , P. 1996 . Biopsy-confirmed hypersensitity pneumonitis in automobile production workers exposed to metalworking fluid—Michigan . MMWR , 45(28) : 606 – 610 . 1994–1995
   Google Scholar
• Robins , T. , Seixas , N. and Franzblau , A. 1997 . Acute respiratory effects on workers exposed to metalworking fluid aerosols in an automotive transmission plant . Am. J. Ind. Med. , 31 : 510 – 524 .
   PubMed Web of Science ®Google Scholar
• Kennedy , S. , Greaves , I. , Kriebel , D. , Eisen , E. , Smith , T. and Woskie , S. 1989 . Acute pulmonary responses among automobile workers exposed to aerosols of machining fluids . Am. J. Ind Med , 15 : 627 – 641 .
   PubMed Web of Science ®Google Scholar
• Kennedy , S. , Chan-Yeung , M. , Teschke , K. and Karlen , B. 1999 . Change in airway responsiveness among apprentices exposed to metalworking fluids . Am J. Respir. Crit. Care Med. , 159 : 87 – 93 .
   PubMed Web of Science ®Google Scholar
• Calvert , G. , Ward , W. , Schnorr , T. and Fine , L. 1998 . Cancer risks among workers exposed to metalworking fluids: A systematic review . Am. J. Ind. Med. , 33 : 282 – 292 .
   PubMed Web of Science ®Google Scholar
• Eisen , E. , Bardin , J. , Gore , R. , Woskie , S. , Hallock , M. and Monson , R. 2001 . Exposure-response models based on extended follow-up of a cohort mortality study in the automobile industry . Scand. J. Work, Environ. Health , 27 ( 4 ) : 240 – 249 .
   PubMed Web of Science ®Google Scholar
• Reeve , G. , Stoudt , A. , Hands , D. and Curry , E. 2003 . Inpatient hospital admission rates for nonmalignant respiratory disease among workers exposed to metal removal fluids at a U.S. automobile manufacturer . Appl. Occup. Environ. Hyg. , 18 : 930 – 938 .
   PubMedGoogle Scholar
• Oudyk , J. , Haines , A. T. and d'Arcy , J. 2003 . Investigating respiratory responses to metalworking fluid exposure . Appl. Occup. Environ. Hyg. , 18 : 939 – 946 .
   PubMedGoogle Scholar
• Trout , D. , Weissman , D. , Lewis , D. , Brundage , R. , Franzblau , A. and Remick , D. 2003 . Evaluation of hypersensitivity pneumonitis among workers exposed to metal removal fluids . Appl. Occup. Environ. Hyg. , 18 : 953 – 960 .
   PubMedGoogle Scholar
• Weiss , L. , Pue , C. and Lewis , R. 2002 . Respiratory illness in workers exposed to metalworking fluid contaminated with nontuberculous . Mycobacteria MMWR , 51 ( 16 ) : 349 – 352 . Ohio 2001
   Google Scholar
• Moore , J. , Christensen , M. and Wilson , R. 2000 . Mycobacterial contamination of metalworking fluids: Involvement of a possible new taxon of rapidly growing . Mycobacteri a. AIHAJ , 61 : 205 – 213 .
   PubMedGoogle Scholar
• Watt , W. 2003 . Observations on the relationship between triazines and Mycobacteria in metal removal fluids . Appl. Occup. Environ. Hyg. , 18 : 961 – 965 .
   PubMedGoogle Scholar
• Dalbey , W. and Biles , R. 2003 . Respiratory toxicology of mineral oils in laboratory animals . Appl. Occup. Environ. Hyg. , 18 : 921 – 929 .
   PubMedGoogle Scholar
• Krystofiak , S. and Schaper , M. 1996 . Prediction of an occupational exposure limit for a mixture on the basis of its components: Application to metalworking fluids . AIHAJ , 57 : 239 – 244 .
   Google Scholar
• Schaper , M. and Detwiler , K. 1991 . Evaluation of the acute respiratory effects of aerosolized machining fluids in mice . Fund. Appl. Toxicol. , 16 : 309 – 319 .
   PubMedGoogle Scholar
• Thorne , P. and DeKoster , J. 1996 . Pulmonary effects of machining fluids in guinea pigs and mice . AIHAJ , 57 : 1168 – 1172 .
   Google Scholar
• Al-Humadi , N. , Shvedova , A. , Battelli , L. , Diotte , N. , Castranova , V. and Kommineni , C. 2000 . Dermal and systemic toxicity after application of semisynthetic metalworking fluids in B6C3F1 mice . Part A. J. Toxicol. Environ. Health , 61 : 579 – 589 .
   PubMed Web of Science ®Google Scholar
• Gordon , T. 2004 . Metalworking fluid—The toxicity of a complex mixture . Part A. J. Toxicol. Environ. Health , 67 : 209 – 219 .
   PubMed Web of Science ®Google Scholar
• Burkowski , J. 2003 . Review of respiratory morbidity from occupational exposure to oil mists . Appl. Occup. Environ. Hyg. , 18 : 828 – 837 .
   PubMedGoogle Scholar
• Mackerer , C. , Griffis , L. , Grabowski , J. and Reitman , F. 2003 . Petroleum mineral oil refining and evaluation of cancer hazard . Appl. Occup. Environ. Hyg. , 18 : 890 – 901 .
   PubMedGoogle Scholar
• Mirer , F. 2003 . Updated epidemiology of workers exposed to metalworking fluids provides sufficient evidence for carcinogenicity . Appl. Occup. Environ. Hyg. , 18 : 902 – 912 .
   PubMedGoogle Scholar
• Savitz , D. 2003 . Epidemiological evidence on the carcinogenicity of metalworking fluids . Appl. Occup. Environ. Hyg. , 18 : 913 – 920 .
   PubMedGoogle Scholar
• Woskie , S. , Virji , M. , Hallock , M. , Smith , T. and Hammond , S. K. 2003 . Summary of findings from the exposure assessments for metalworking fluid mortality and morbidity studies . Appl. Occup. Environ. Hyg. , 18 : 855 – 864 .
   PubMedGoogle Scholar
• Simpson , A. 2003 . Comparison of methods for the measurement of mist and vapor from light mineral oil-based metalworking fluids . Appl. Occup. Environ. Hyg. , 18 : 865 – 876 .
   PubMedGoogle Scholar
• Simpson , A. , Stear , M. Groves , J. 2003 . Occupational exposure to metalworking fluid mist and sump fluid contaminants . Ann. Occup. Hyg. , 47 ( 1 ) : 17 – 30 .
   PubMed Web of Science ®Google Scholar
• Volckens , J. , Boundy , M. , Leith , D. and Hands , D. 1999 . Oil mist concentration: A comparison of sampling methods . AIHAJ , 60 : 684 – 689 .
   Google Scholar
• McAneny , J. , Leith , D. and Boundy , M. 1995 . Volatilization of mineral oil mist collected on sampling filters . Appl. Occup. Environ. Hyg. , 10 : 783 – 787 .
   Google Scholar
• Raynor , P. , Volckens , J. and Leith , D. 2000 . Modeling evaporative loss of oil mist collected by sampling filters . Appl. Occup. Environ. Hyg. , 15 : 90 – 96 .
   PubMedGoogle Scholar
• Virji , M. , Woskie , S. , Sama , S. , Kriebel , D. and Eberiel , D. 2000 . Identifying the determinants of exposure to viable micro-organisms in the air and bulk metalworking fluids . AIHAJ , 61 : 788 – 797 .
   PubMedGoogle Scholar
• Webster , A. , Lee , J. and Deininger , R. 2005 . Rapid assessment of microbial hazards in metalworking fluids . J. Occup. Environ. Hyg. , 2 : 213 – 218 .
   PubMed Web of Science ®Google Scholar
• Thorne , P. , Bartlett , K. , Phipps , J. and Kulhankova , K. 2003 . Evaluation of five extraction protocols for quantification of endotoxin in metalworking fluid Aerosol . Ann. Occ. Hyg. , 47 ( 1 ) : 31 – 36 .
   PubMed Web of Science ®Google Scholar
• Donovan , B. , Haraney , J. , McCleery , R. and Mueller , C. 2005 . Evaluation of the NIOSH MWF total particulate matter: Thoracic particulate matter conversion factor in a machining environment . J. Occup. Environ. Hyg. , 2 : 239 – 243 .
   PubMed Web of Science ®Google Scholar
• O'Brien , D. , Piacitelli , G. , Sieber , W.K. , Hughes , R. and Catalano , J. 2001 . An evaluation of short-term exposures to metalworking fluids in small machine shops . AIHAJ , 62 : 342 – 348 .
   PubMedGoogle Scholar
• d'Arcy , J. , Hands , D. and Hartwig , J. Comparison of machining fluid aerosol concentrations from three different particulate sampling and analysis methods . Symposium Proceedings—The Industrial Metalworking Environment: Assessment and Control . pp. 197 – 199 . Detroit , Mich. : American Automobile Manufacturers Association .
   Google Scholar
• American Society of Testing and Materials (ASTM) . 1997 . Provisional Standard Test Method for Metal Removal Aerosol in Workplace Atmospheres , (PS-42-97). [Standard] West Conshohocken Pa.: ASTM
   Google Scholar
• d'Arcy , J. Air contaminant visualization for cost-effective engineering controls . Symposium Proceedings – The Industrial Metalworking Environment: Assessment and Control . pp. 284 – 288 . Detroit , Mich. : American Automobile Manufacturers Association .
   Google Scholar
• O'Brien , D. 2003 . Aerosol mapping of a facility with multiple cases of hypersensitivity pneumonitis: Demonstration of mist reduction and a possible dose/response relationship . Appl. Occup. Environ. Hyg. , 18 : 947 – 952 .
   PubMedGoogle Scholar
• Organization Resources Counselors (ORC) . “Management of the Metal Removal Fluid Environment.” . [Online] http://www.aware-services.com/orc (Accessed 6/7/05)
   Google Scholar
• Ross , A. , Teschke , K. , Brauer , M. and Kennedy , S. 2004 . Determinants of exposure to metalworking fluid aerosol in small machine shops . Ann. Occup. Hyg. , 48 ( 5 ) : 383 – 391 .
   PubMed Web of Science ®Google Scholar
• Raynor , P. , Kim , S. and Bhattacharya , M. 2005 . Mist generation from metalworking fluids formulated using vegetable oils . Ann. Occup. Hyg. , 49 ( 4 ) : 283 – 293 .
   PubMed Web of Science ®Google Scholar
• Thornburg , J. and Leith , D. 2000 . Mist generation during metal machining . J. Tribol. , 122 : 544 – 549 .
   Web of Science ®Google Scholar
• Michalek , D. , Wilson , W. , Hii , S. , Sun , J. , Gunter , K. and Sutherland , J. 2003 . Experimental and analytical efforts to characterize cutting fluid mist formation and behavior in machining . Appl. Occup. Environ. Hyg. , 18 : 842 – 854 .
   PubMedGoogle Scholar
• Heitbrink , W. , d'Arcy , J. and Yacher , J. 2000 . Mist generation at a machining center . AIHAJ , 61 : 22 – 20 .
   PubMedGoogle Scholar
• Heitbrink , Yacher , W. J. , Deye , G. and Spencer , A. 2000 . Mist control at machining centers, Part 1—Mist characterization . AIHAJ , 61 : 275 – 281 .
   PubMedGoogle Scholar
• American National Standards Institute (ANSI) . 1997 . Mist Control Considerations for the Design, Installation and Use of Machine Tools Using Metalworking Fluids , (ANSI B11 TR 2–1997). [Technical Report] New York: ANSI
   Google Scholar
• Veillette , M. , Thorne , P. , Gordon , T. and Duchaine , C. 2004 . Six month tracking of microbial growth in a metalworking fluid after system cleaning and recharging . Ann. Occup. Hyg. , 48 ( 6 ) : 541 – 546 .
   PubMed Web of Science ®Google Scholar
• Bracker , A. , Storey , E. , Yang , C. and Hodgson , M. 2003 . An outbreak of hypersensitivity pneumonitis at a metalworking plant: A longitudinal assessment of intervention effectiveness . Appl. Occup. Environ. Hyg. , 18 : 96 – 108 .
   PubMedGoogle Scholar
• Selvaraju , S. , Khan , I. and Yadav , J. 2005 . Biocidal activity of formaldehyde and nonformaldehyde biocides Toward Mycobacterium immunogenum Pseudomonas fluorescens in pure and mixed suspensions in synthetic metalworking fluid and saline . Appl. Environ. Microbiol. , 71 : 542 – 546 .
   PubMed Web of Science ®Google Scholar
• Park , D. , Teschke , K. and Bartlett , K. 2001 . A model for predicting endotoxin concentrations in metalworking fluid sumps in small machine shops . Ann. Occup. Hyg. , 45 ( 7 ) : 569 – 576 .
   PubMed Web of Science ®Google Scholar
• Yacher , J. , Heitbrink , W. and Burroughs , G. E. 2000 . Mist control at machining center, Part 2: Mist control following the installation of air cleaners . AIHAJ , 61 : 282 – 289 .
   PubMedGoogle Scholar
• Leith , D. , Volckens , J. , Boundy , M. and Hands , D. 2003 . Control methods for mineral oil mists . Appl. Occup. Environ. Hyg. , 18 : 883 – 889 .
   PubMedGoogle Scholar
• Cooper , S. , Raynor , P. and Leith , D. 1996 . Evaporation of mineral oil in a mist collector . Appl. Occup. Environ. Hyg. , 11 : 1204 – 1211 .
   Google Scholar
• Cooper , S. and Leith , D. 1998 . Evaporation of metalworking fluid mist in laboratory and industrial collectors . AIHAJ , 59 : 45 – 51 .
   Google Scholar
• Raynor , P. and Leith , D. 1999 . Evaporation of accumulated multicomponent liquids from fibrous filters . Ann. Occ. Hyg. , 43 ( 3 ) : 181 – 192 .
   Web of Science ®Google Scholar
• Leith , D. , Raynor , P. , Boundy , M. and Cooper , S. 1996 . Performance of industrial equipment to collect coolant mist . AIHAJ , 57 : 1142 – 1148 .
   Google Scholar
• Raynor , P. and Leith , D. 2000 . The influence of accumulated liquid on fibrous filter performance . J. Aerosol Sci. , 31 : 19 – 34 .
   Web of Science ®Google Scholar
• Boundy , M. , Leith , D. , Hands , D. , Gressel , M. and Burroughs , G. 2000 . Performance of industrial mist collectors over time . Appl. Occup. Environ. Hyg. , 15 : 928 – 935 .
   PubMedGoogle Scholar
• Rosati , J. , Leith , D. and Raynor , P. 1999 . Determinants of filter lifetime . Filtrat. Separat. J. , 36 ( 10 ) : 30 – 32 .
   Web of Science ®Google Scholar
• Abrams , L. , Seixas , N. , Robins , T. , Burge , H. , Muilenberg , M. and Franzblau , A. 2000 . Characterization of metalworking fluid exposure indices for a study of acute respiratory effects . Appl. Occup. Environ. Hyg. , 15 : 492 – 502 .
   PubMedGoogle Scholar
• Hands , D. , Sheehan , M. , Wong , B. and Lick , H. 1996 . Comparison of metalworking fluid mist exposures from machining with different levels of machine enclosure . AIHAJ , 57 : 1173 – 1179 .
   Google Scholar
• Zar , J. 1984 . Biostatistical Analysis , 2 , 103 – 105 . Englewood Cliffs , N.J. : Prentice-Hall . pp. 87, 135–142
   Google Scholar
• Gad , S. and Weil , C. 1988 . Statistics and Experimental Design for Toxicologists , 70 – 78 . Caldwell , NJ : Telford Press . pp. 12
   Google Scholar
• Snedecor , G.W. and Cochran , W. G. 1980 . Statistical Methods , Seventh , Ames , Iowa : The Iowa State University Press . pp. 37, 54–56, 215–237
   Google Scholar
• Piacitelli , G. , Sieber , W.K. , O'Brien , D. , Hughes , R. , Glaser , R. and Catalano , J. 2001 . Metalworking fluid exposures in small machine shops: An overview . AIHAJ , 62 : 356 – 370 .
   PubMedGoogle Scholar
• Watt , W. and Hartwig , J. 1998 . “Economic & Technical Feasibility of MRF Aerosol Control at Chrysler.” Testimony before the OSHA Metalworking Fluids Standards Advisory Committee, 3/25/98, Sharonville, Ohio . In “Final Report of the OSHA Metalworking Fluids Standards Advisory Committee,” submitted to Charles Jeffress, Assistant Secretary of Labor/OSHA by Maura J. Sheehan, chairperson and editor, July 15, 1999. Chapter Four. 4.4.1.2 [Online] http://www.osha.gov/SLTC/metalworkingfluids/mwf_finalreport-CH4.html (Accessed 7/13/05)
   Google Scholar
• Steele , K. 1998 . “Machine Tools.” Testimony before the OSHA Metalworking Fluids Standards Advisory Committee, 10/21/98, Detroit, Mich . In “Final Report of the OSHA Metalworking Fluids Standards Advisory Committee,” submitted to Charles Jeffress, Assistant Secretary of Labor/OSHA by Maura J. Sheehan, chairperson and editor, July 15, 1999. Chapter Four. 4.4.1.3 [Online] http://www.osha.gov/SLTC/metalworkingfluids/mwf_finalreport-Ch4.html (Accessed 7/13/05)
   Google Scholar
• Kramer , R. 1998 . “Costs of Oil Mist Control Installations at Ford Motor Company.” Testimony before the OSHA Metalworking Fluids Standards Advisory Committee, 3/25/98, Sharonville, Ohio . In “Final Report of the OSHA Metalworking Fluids Standards Advisory Committee,” submitted to Charles Jeffress, Assistant Secretary of Labor/OSHA by Maura J. Sheehan, chairperson and editor, July 15, 1999. Chapter Four. 4.4.1.2 [Online] http://www.osha.gov/SLTC/ metalworkingfluids/mwf_finalreport-Ch4.html (Accessed 7/13/05)
   Google Scholar