REFERENCES
- Heitbrink , W.A. , Evans , D.E. , Peters , T.M. and Slavin , T.J. 2007 . The characterization and mapping of very fine particles in an engine machining and assembly facility . J. Occup. Environ. Hyg , 4 : 341 – 351 .
- Evans , D.E. , Heitbrink , W.A. , Slavin , T.J. and Peters , T.M. 2008 . Ultrafine and respirable particles in an automotive grey iron foundry . Ann. Occup. Hyg. , 52 ( 1 ) : 9 – 21 .
- Thornburg , J. and Leith , D. 2000 . Size distribution of mist generated during metal machining . Appl. Occup. Environ. Hyg. , 15 : 618 – 628 .
- Pankow , J.F. 1994 . An absorption model of the gas/particle partitioning of organic compounds in the atmosphere . Atmos. Environ. , 28 ( 2 ) : 185 – 188 .
- Chan , T.L. , D'Arcy , J.B. and Saik , J. 1990 . Size characteristics of machining fluid aerosols in the an industrial metalworking environment . Appl. Occup. Environ. Hyg. , 5 : 162 – 163 .
- Heitbrink , W.A. , D'Arcy , J.B. and Yacher , J.M. 2000 . Mist generation at a machining center . Am. Ind. Hyg. Assoc. , 61 ( 1 ) : 22 – 30 .
- Heitbrink , W.A. , Yacher , J.M. , Deye , G.J. and Spencer , A.B. 2000 . Mist control at machining center, Part 1: Mist characterization . Am. Ind. Hyg. Assoc. J. , 61 ( 2 ) : 275 – 28 .
- Thornburg , J. and Leith , D. 2000 . Size distribution of mist generated during metal machining . Appl. Occup. Environ. Hyg. , 15 : 618 – 628 .
- Heitbrink , W.A. , D'Arcy , J.B. and Yacher , J.M. 2000 . Mist generation at a machining center . Am. Ind. Hyg. Assoc. J. , 61 ( 1 ) : 22 – 30 .
- Lefebvre , A.H. 1989 . Atomization and Sprays , New York : Hemisphere Publishing .
- Zimmer , A.T. and Biswas , P. 2001 . Characterization of the aerosols resulting from arc welding processes . J. Aerosol Sci. , 32 ( 8 ) : 993 – 1008 .
- Zimmer , A.T. , Baron , P.A. and Biswas , P. 2002 . The influence of operating parameters on number-weighted aerosol size distribution generated from a gas metal arc welding process . J. Aerosol Sci. , 33 ( 3 ) : 519 – 31 .
- Zimmer , A.T. and Maynard , A.D. 2002 . Investigation of the aerosols produced by a high-speed hand-held grinder using various substrates . Ann. Occup. Hyg. , 46 ( 8 ) : 663 – 672 .
- Ross , A.S. , Teschke , K. , Brauer , M. and Kennedy , S.M. 2004 . Determinants of exposure to metalworking fluid aerosol in small machine shops . Ann. Occup. Hyg. , 48 ( 5 ) : 383 – 391 .
- Portela , J.R. , Lopez , J. , Nebot , E. and de la Ossa , E. Martinez . 2001 . Elimination of cutting oil wastes by promoted hydrothermal oxidation . J. Hazard Mater. , 88 ( 1 ) : 95 – 106 .
- Zarudi , I. and Zhang , L.C. 2002 . A revisit to some wheel-workpiece interaction problems in surface . Int. J. Machine Tools Manufacture , 42 : 905 – 913 .
- ACGIH . 2008 . “ 2008 TLVs and BEIs Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices ” . 1 – 94 . Cincinnati, Ohio
- Brouwer , D.H. , Gijsbers , J.H.J. and Lurvink , M.W.M. 2004 . Personal exposure to ultrafine particles in the workplace: Exploring sampling techniques and strategies . Ann. Occup. Hyg. , 48 ( 5 ) : 439 – 453 .
- Oberdörster , G. , Finkelstein , J. and Ferin , J. 1996 . Ultrafine particles as a potential environmental health hazard—Studies with model particles . Chest 109(Suppl 3) , : 68 – 69 .
- Peters , A. , Wichmann , H.E. , Tuch , T. , Heinrich , J. and Heyder , J. 1997 . Respiratory effects are associated with the number of ultrafine particles . Am. J. Respir. Crit. Care Med. , 155 : 1376 – 1383 .
- Donaldson , K. , Brown , D. and Clouter , A. 2002 . The pulmonary toxicology of ultrafine particles . J. Aerosol Med. , 15 ( 2 ) : 213 – 220 .
- Maynard , A.D. and Kuempel , E.D. 2005 . Airborne nanostructured particles and occupational health . J. Nanopart. Res. , 7 : 587 – 614 .
- Maynard , A.D. 2003 . Estimating aerosol surface area from number and mass concentration measurements . Ann. Occup. Hyg. , 47 ( 2 ) : 123 – 144 .
- Brunauer , S. , Emmet , P.H. and Teller , E. 1938 . Adsorption of gases in multimolecular layers . J. Am. Chem. Soc. , 60 : 309 – 319 .
- Keller , A. , Fierz , M. , Siegmann , K. , Siegmann , H.C. and Filippov , A. 2001 . Surface science with nanosized particles in a carrier gas . J. Vac. Sci. Technol. , 19 ( 1 ) : 1 – 8 .
- Maynard , A.D. 2007 . Nanotechnology: The next bit thing, or much ado about nothing . Ann. Occup. Hyg. , 51 ( 1 ) : 1 – 12 .
- Baltensperger , U. , Weingartener , E. , Burscher , H. and Keskinen , J. 2001 . “ Dynamic mass and surface area measurements ” . In Aerosol Measurement Principles, Techniques, and Applications, 2nd ed. , Edited by: Baron , P.A. and Willeke , K. 404 – 405 . New York : Wiley InterScience .
- Fernandez de la Mora , J. , de Juan , L. , Eichler , T. and Rosell , J. 1998 . Differential mobility analysis of molecular ions and nanometer particles . Trends Anal. Chem. , 17 : 328 – 339 .
- Friedlander , S.K. 2000 . Smoke, Dust, and Haze. , 2nd ed , 33 NewYork : Wiley .
- Hinds , W.C. 1999 . Aerosol Technology—Properties, Behavior, and Measurement of Aerosol Properties , 48 – 51 . New York : Wiley-Interscience .
- Ku , B.K. and Maynard , A.D. 2005 . Comparing aerosol surface-area measurements of monodisperse ultrafine silver agglomerates by mobility analysis, transmission electron microscopy and diffusion charging . J. Aerosol Sci. , 36 : 1108 – 1124 .
- Peters , T.M. , Heitbrink , W.A. , Evans , D.E. , Slavin , T.J. and Maynard , A.D. 2006 . The mapping of fine and ultrafine particle concentrations in an engine machining and assembly facility . Ann. Occup. Hyg. , 50 ( 3 ) : 249 – 257 .
- ACGIH . 2005 . “ 2005 TLVs and BEIs Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices ” . 75 Cincinnati, Ohio : ACGIH .
- Sioutas , C. 1999 . A pilot study to characterize fine particles in the environment of an automotive machining facility . Appl. Occup. Environ. Hyg. , 14 : 246 – 254 .
- Marjamäki , M. , Keskinen , J. , Chen , D-R. and Pui , D.Y.H. 2000 . Performance evaluation of the electrical low-pressure impactor (ELPI) . J. Aerosol Sci. , 31 ( 2 ) : 249 – 261 .
- Maricq , M. , Xu , Ning and Chase , R.E. 2006 . Measuring particle mass emissions the electrical low pressure impactor . Aerosol Sci. Technol. , 40 : 68 – 79 .
- Kinsey , J.S. , Mitchell , W.A. and Squier , W.C. 2006 . Evaluation of methods for the determination of diesel-generated fine particulate matter:Physical characterization results . J. Aerosol Sci. , 37 ( 1 ) : 63 – 87 .
- Gulijk , V.C. , Marijnissen , J.C.M. , Makkee , M. , Moulijn , J.A. and Schmidt-Ott , A. 2004 . Measuring diesel soot with a scanning mobility particle sizer and an electrical low-pressure impactor: Performance assessment with a model for fractal-like agglomerates . J. Aerosol Sci. , 35 ( 5 ) : 633 – 655 .
- Maricq , M.M. , Podsiadlik , D.H. and Chase , R.E. 2005 . Size distributions of motor vehicle exhaust PM: A comparison between ELPI and SMPS measurements . Aerosol Sci. Technol. , 33 ( 3 ) : 239 – 260 .
- Mulhausen , J.R. and Damiano , J. 1999 . A Strategy for Assessing and Managing Occupational Exposures , Fairfax, Va : AIHA .
- “The Student's SEMSTAT.” . 2008 . [Online] Available at http://www.itl.nist.gov/div898/handbook/semstat/semstat-doc.pdf (Accessed May 20, 2008)
- Ramachandran , G. , Paulsen , D.P. , Watt , W. and Kittelson , D. 2005 . Mass, surface area and number metrics in diesel occupational exposure assessment . J. Environ. Monitor. , 7 : 728 – 735 .