Exposure Controls for Nanomaterials at Three Manufacturing Sites

REFERENCES

• National Institute for Occupational Safety and Health (NIOSH): Approaches to Safe Nanotechnology: Managing the Health and Safety Concerns Associated with Engineered Nanomaterials. Cincinnati, OH: NIOSH, 2009.
   Google Scholar
• Schulte, P., C. Geraci, R. Zumwalde, M. Hoover, and E. Kuempel: Occupational risk management of engineered nanoparticles. J. Occup. Environ. Hyg. 5(4):239–249 (2008).
   PubMed Web of Science ®Google Scholar
• Kuempel, E.D., C.L. Geraci, and P.A. Schulte: Risk assessment and risk management of nanomaterials in the workplace: Translating research to practice. Ann. Occup. Hyg. 6(5):491–505 (2012).
   Google Scholar
• Ramachandran, G., M. Ostraat, D.E. Evans, et al.: A strategy for assessing workplace exposures to nanomaterials. J. Occup. Environ. Hyg. 8(11):673–685 (2011).
   PubMed Web of Science ®Google Scholar
• Schulte, P., V. Murashov, R. Zumwalde, E. Kuempel, and C. Geraci: Occupational exposure limits for nanomaterials: State of the art. J. Nanopart. Res. 12(6):1971–1987 (2010).
   Web of Science ®Google Scholar
• Van Broekhuizen, P., W. Van Veelen, W.H. Streeekstra, P. Schulte, and L. Reijners: Exposure Limits for Nanoparticles: Report of an International Workshop on Nano Reference Values. Ann. Occup. Hyg. 56(5):515–524 (2012).
   PubMed Web of Science ®Google Scholar
• van Broekhuizen, P., F. van Broekhuizen, R. Cornelissen, and L. Reijnders: Workplace exposure to nanoparticles and the application of provisional nanoreference values in times of uncertain risks. J. Nanopar. Res. 14(4):1–25 (2012).
   Web of Science ®Google Scholar
• Van Broekhuizen, P., and B. Dorbeck-Jung: Exposure limit values for nanomaterials-capacity and willingness of users to apply a precautionary approach. J. Occup. Environ. Hyg. 10(1):36–53 (2013).
   PubMed Web of Science ®Google Scholar
• Castranova, V., P.A. Schulte, and R.D. Zumwalde: Occupational nanosafety considerations for carbon nanotubes and carbon nanofibers. Acc. Chem. Res. 46(3):642–649 (2013).
   PubMed Web of Science ®Google Scholar
• Occupational Safety and Health Adminstration (OSHA): OSHA FactSheet: Working Safely with Nanomaterials. Washington, DC: OSHA, 2013.
   Google Scholar
• Murashov, V., and J. Howard: Health and Safety Standards. In Nanotechnology Standards, New York: Springer, 2011. pp. 209–238.
   Google Scholar
• Brouwer, D.: Exposure to manufactured nanoparticles in different workplaces. Toxicology 269(2):120–127 (2010).
   PubMed Web of Science ®Google Scholar
• Methner, M., L. Hodson, A. Dames, and C. Geraci: Nanoparticle Emission Assessment Technique (NEAT) for the identification and measurement of potential inhalation exposure to engineered nanomaterials—Part B: Results from 12 field studies. J. Occup. Environ. Hyg. 7(3):163–176 (2010).
   PubMed Web of Science ®Google Scholar
• American National Standards Institute (ANSI): American National Standard for Occupational Safety and Health Management Systems (ANSI/AIHA Z10–2005) [Standard] Fairfax, VA: American Industrial Hygiene Association, 2005.
   Google Scholar
• British Standards Institution: Occupational Health and Safety Management Systems-Guidelines for Implementation of OHSAS 18001:2007. London: British Standards Institution, 2007.
   Google Scholar
• Manuele, F.A.: Advanced Safety Management Focusing on Z10 and Serious Injury Prevention. Hoboken, NJ: John Wiley & Sons, Inc., 2008.
   Google Scholar
• American National Standards Institute (ANSI): Prevention Through Design Guidelines for Addressing Occupational Hazards and Risks in Design and Redesign Processes 60018–2187. Des Plaines, IL: American Society for Safety Engineers, 2011.
   Google Scholar
• Brouwer, D.K., J.H.J. Gijsbers, and M.W.M. Lurvink: Personal exposure to ultrafine particles in the workplace: Exploring sampling techniques and strategies. Ann. Occup. Hyg. 48(5):439–453 (2004).
   PubMed Web of Science ®Google Scholar
• Demou, E., P. Peter, and S. Hellweg: Exposure to manufactured nanostructured particles in an industrial pilot plant. Ann. Occup. Hyg. 52(8):695–706 (2008).
   PubMed Web of Science ®Google Scholar
• Peters, T.M., S. Elzey, R. Johnson, et al.: Airborne monitoring to distinguishing engineered nanomaterials from incidental particles for environmental health and safety. J. Occup Environ. Hyg. 6:73–81 (2009).
   PubMed Web of Science ®Google Scholar
• McGarry, P., L. Morawska, L.D. Knibbs, and H. Morris: Excursion guidance criteria to guide control of peak emissions and exposure to airborne engineered particles. J. Occup. Environ. Hyg. 10(11):640–651 (2013).
   PubMed Web of Science ®Google Scholar
• Sorensen, C.M., J. Gebhart, T.J. O’Hern, and D.J. Rader: Optical Measurement Techniques: Fundamentals and Applications. In Aerosol Measurement, Principles, Techniques, and Applications, P. Kulkarni, P.A. Baron, and K. Willeke (eds.), pp. 295–305. Hoboken, NJ: John Wiley & Sons, Inc., 2011.
   Google Scholar
• Benton-Vitz, K., and J. Volckens: Evaluation of the pDR-1200 real-time aerosol monitor. J. Occup.Environ. Hyg. 5(6):353–359 (2008).
   PubMed Web of Science ®Google Scholar
• Gressel, M., W. Heitbrink, J. McGlothlin, and T. Fischbach: “In-depth Survey Report: Xontrol Technology for Manual Transfer of Chemical Powders at the BF Goodrich Company, Marietta, Ohio.” Cincinnati, Ohio: National Institute for Occupational Safety and Health, 1985.
   Google Scholar
• Gressel, M.G., W.A. Heitbrink, and P.A. Jensen: Video exposure monitoring—A means of studying sources of occupational air contaminant exposure, Part I—Video exposure monitoring techniques. Appl. Occup. Environ. Hyg. 8(4):334–338 (1993).
   Google Scholar
• ANSI/ASHRAE 110–1995: Method of testing performance of laboratory fume hoods. Altanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 1995.
   Google Scholar
• Hirst, N., M. Brocklebank, and M. Ryder: Containment Systems: A Design Guide. Woburn, Mass.: Gulf Professional Publishing, 2002.
   Google Scholar
• Stanier, C.O., A.Y. Khlystov, and S.N. Pandis: Ambient aerosol size distributions and number concentrations measured during the Pittsburgh Air Quality Study (PAQS). Atmosph. Environ. 38(20):3275–3284 (2004).
   Web of Science ®Google Scholar
• Morawska, L., Z. Ristovski, E. Jayaratne, D.U. Keogh, and X. Ling: Ambient nano and ultrafine particles from motor vehicle emissions: Characteristics, ambient processing and implications on human exposure. Atmosph. Environ. 42(35):8113–8138 (2008).
   Web of Science ®Google Scholar
• Hamilton County Department of Environmental Services: “2010 Air Quality Data Report.” Cincinnati, OH: Hamilton County Department of Environmental Services, 2011.
   Google Scholar
• American National Standards Institute (ANSI): American National Standard for Occupational Health and Safety Management Systems. [Standard ANSI/AIHA Z10-2005] Fairfax VA: American Industrial Hygiene Association, 2005.
   Google Scholar
• U.S. Department of Defense: Department of Defense Standard Practice System Safety. Wright Patterson Air Force Base, OH: Air Force Material Command/SES (System Safety Office), 2012.
   Google Scholar
• Manuele, F.A.: Prevention through design addressing occupational risks in the design and redesign processes. Prof. Safety 53(10):28–40 (2008).
   Google Scholar
• Demou, E., P. Peter, and S. Hellweg: Exposure to manufactured nanostructured particles in an industrial pilot plant. Ann. Occup. Hyg. 52(8):695–706 (2008).
   PubMed Web of Science ®Google Scholar
• Lee, J.H., M. Kwon, J.H. Ji, et al.: Exposure assessment of workplaces manufacturing nanosized TiO(2) and silver. Inhal. Toxicol. 23(4):226–236 (2011).
   PubMed Web of Science ®Google Scholar
• Lee, J.H., S.B. Lee, G.N. Bae, et al.: Exposure assessment of carbon nanotube manufacturing workplaces. Inhal. Toxicol. 22(5):369–381 (2010).
   PubMed Web of Science ®Google Scholar
• Methner, M.: Engineering case reports: Effectiveness of local exhaust ventilation (LEV) in controlling engineered nanomaterial emissions during reactor cleanout operations. J. Occup. Environ. Hyg. 5(6):D63–D69 (2008).
   PubMed Web of Science ®Google Scholar
• Yeganeh, B., C.M. Kull, M.S. Hull, and L.C. Marr: Characterization of airborne particles during production of carbonaceous nanomaterials. Environ. Sci. Technol. 42(12):4600–4606 (2008).
   PubMed Web of Science ®Google Scholar
• Tsai, S.J., M. Hoffman, M.F. Hallock, E. Ada, J. Kong, and M.J. Ellenbecker: Characterization and evaluation of nanoparticle release during the synthesis of single-walled and multiwalled carbon nanotubes by chemical vapor deposition. Environ. Sci. Technol. 43:6017–6023 (2009).
   PubMed Web of Science ®Google Scholar
• Methner, M.M., M.E. Birch, D.E. Evans, B.K. Ku, K. Crouch, and M.D. Hoover: Case study: Identification and characterization of potential sources of worker exposure to carbon nanofibers during polymer composite laboratory operations. J. Occup. Environ. Hyg. 4(12):D125–130 (2007).
   PubMed Web of Science ®Google Scholar
• Johnson, D.R., M.M. Methner, A.J. Kennedy, and J.A. Steevens: Potential for occupational exposure to engineered carbon-based nanomaterials in environmental laboratory studies. Environ. Health Perspect. 118(1):49–54 (2010).
   PubMed Web of Science ®Google Scholar
• Tsai, S.J., R.F. Huang, and M.J. Ellenbecker: Airborne nanoparticle exposures while using constant-flow, constant-velocity, and air-curtain-isolated fume hoods. Ann. Occup. Hyg. 54(1):78–87 (2010).
   PubMed Web of Science ®Google Scholar
• American Conference of Governmental Industrial Hygienists (ACGIH®): Industrial Ventilation: A Manual of Recommended Practice for Design. Cincinnati, OH: American Conference of Governmental Industrial Hygienists, 2010.
   Google Scholar
• Mazzuckelli, L.F., M.M. Methner, M.E. Birch, et al.: Identification and characterization of potential sources of worker exposure to carbon nanofibers during polymer composite laboratory operations. J. Occup. Environ. Hyg. 4(12):125–130 (2007).
   Web of Science ®Google Scholar
• Methner, M.: Effectiveness of a custom-fitted flange and local exhaust ventilation (LEV) system in controlling the release of nanoscale metal oxide particulates during reactor cleanout operations. Intern. J. Occup. Environ. Health 16(4):475–487 (2010).
   PubMed Web of Science ®Google Scholar
• Cena, L.G., and T.M. Peters: Characterization and control of airborne particles emitted during production of epoxy/carbon nanotube nanocomposites. J. Occup. Environ. Hyg. 8(2):86–92 (2011).
   PubMed Web of Science ®Google Scholar
• Methner, M., L. Hodson, A. Dames, and C. Geraci: Nanoparticle emission assessment technique (NEAT) for the identification and measurement of potential inhalation exposure to engineered nanomaterials—Part B: Results from 12 field studies. J. Occup. Environ. Hyg. 7(3):163–176 (2009).
   Web of Science ®Google Scholar
• Tsai, S.J.C., R.F. Huang, and M.J. Ellenbecker: Airborne nanoparticle exposures while using constant-flow, constant-velocity, and air-curtain-isolated fume hoods. Ann. Occup. Hyg. 54(1):78–87 (2010).
   PubMed Web of Science ®Google Scholar
• Cesard, V., E. Belut, C. Prevost, A. Taniere, and N. Rimbert: Assessing the containment efficiency of a microbiological safety cabinet during the simultaneous generation of a nanoaerosol and a tracer gas. Ann. Occup. Hyg. 57(3):345–359 (2012).
   PubMed Web of Science ®Google Scholar
• Dahm, M.M., D.E. Evans, M.K. Schubauer-Berigan, M.E. Birch, and J.A. Deddens: Occupational exposure assessment in carbon nanotube and nanofiber primary and secondary manufacturers: Mobile direct-reading sampling. Ann. Occup. Hyg. 57(3):328–344 (2012).
   PubMed Web of Science ®Google Scholar