797
Views
6
CrossRef citations to date
0
Altmetric
Report

Effect of hollow bit local exhaust ventilation on respirable quartz dust concentrations during concrete drilling

, &

References

  • ACGIH: 2018 Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices. Cincinnati, OH: ACGIH, 2018. p. 53.
  • Flanagan, M.E, N. Seixas, P. Becker, B. Takacs, and J. Camp: Silica exposure on construction sites: Results of an exposure monitoring data compilation project. J. Occup. Environ. Hyg. 3:144–152 (2006).
  • Sauve, J-F., C. Beaudry, D. Begin, C. Dion, M. Gerin, and J. Lavoue: Silica exposure during construction activities: Statistical modeling of task-based measurements from the literature. Ann. Occup. Hyg. 57:432–443 (2012).
  • Blute, N.A, S.A. Woskie, and C.A. Greenspan: Exposure characterization for highway construction part 1: Cut and cover and tunnel finish stages. Appl. Occup. Environ. Hyg. 14:632–641 (1999).
  • Lofgren, D.J.: Silica exposure for concrete workers and masons. Appl. Occup. Environ. Hyg. 8:832–836 (1993).
  • Kluger, N., J. Kraus, R. Woelke-Klopsch, U. Musanke, and D. Höber: Evaluation of Dust Emission Properties for Hand-operated Power Tools and Devices Used for Work on Mineral Materials. Berlin, Germany: Berufsgenossenschaft der Bauwirtschaft, 2006.
  • National Institute for Occupational Safety and Health (NIOSH): NIOSH Hazard Review: Health Effects of Occupational Exposure to Respirable Crystalline Silica (DHHS [NIOSH] Publication No. 2002-129). Centers for Disease Control and Prevention, 2002.
  • Occupational Safety and Health Administration (OSHA): Occupational exposure to respirable crystalline silica: Final rule, Federal Register 81(58) (March 25, 2016). pp. 16285–16890. Available at https://www.osha.gov/silica/ (2016).
  • Cooper, M.R., P. Susi, and D. Rempel: Case study: Evaluation and control of respirable silica exposure during lateral drilling of concrete. J. Occup. Environ. Hyg. 9:D35–D41 (2012).
  • Shephard, S., S.R. Woskie, C. Holcroft, and M. Ellenbecker: Reducing silica and dust exposures in construction during use of powered concrete-cutting hand tools: Efficacy of local exhaust ventilation on hammer drills. J. Occup. Environ. Hyg. 6:42–51 (2009).
  • Carty, P., M.R. Cooper, A. Barr, R.L. Neitzel, J. Balmes, and D. Rempel: The effects of bit wear on respirable silica dust, noise and productivity: A hammer drill bench study. Ann. Work Expos. Health 61(6):700–710 (2017).
  • Hornung, R.W., and L.D. Reed: Estimation of average concentration in the presence of nondetectable values. J. Occup. Environ. Hyg. 5:46–51 (1990).
  • Beck, T.W.: Evaluations of bit sleeve and twisted-body designs for controlling roof bolter dust. Min. Eng. 67(2):34–40 (2015).
  • Hallin, N.: Occurrence Quartz in the Construction Sector. The Construction Industry’s Organization for Working Environment Safety and Health. Bygghalsan, Sweden, Report 1983-04-01 (1983).
  • Echt, A.S., Sanderson, W.T., Mead, K.R., H.A. Feng, and D.R. Farwick: Effective dust control systems on concrete dowel drilling machinery. J. Occup. Environ. Hyg. 13:718–724 (2016).
  • European Standard EN 50632-1: Electric Motor-operated Tools – Dust Measurement Procedure – Part 1: General Requirements. CEN-CENELEC Management Centre, Brussels, Belgium, 2015.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.