References
- O. Manca, S. Nardini, and D. Ricci, “A numerical study of nanofluid forced convection in ribbed channels,” Appl. Thermal Eng., vol. 37, pp. 280–292, 2012. DOI: https://doi.org/10.1016/j.applthermaleng.2011.11.030.
- O. A. Akbari, et al., “Investigation of rib’s height effect on heat transfer and flow parameters of laminar water–Al2O3 nanofluid in a rib-microchannel,” Appl. Math. Computation, vol. 290, pp. 135–153, 2016a. DOI: https://doi.org/10.1016/j.amc.2016.05.053.
- O. A. Akbari, D. Toghraie, and A. Karimipour, “Impact of ribs on flow parameters and laminar heat transfer of water–aluminum oxide nanofluid with different nanoparticle volume fractions in a three-dimensional rectangular microchannel,” Adv. Mech. Eng., vol. 7, no. 11, pp. 168781401561815–1687814015618155, 2015. DOI: https://doi.org/10.1177/1687814015618155.
- A. Karimipour, H. Alipour, O. A. Akbari, D. T. Semiromi, and M. H. Esfe, “Studying the effect of indentation on flow parameters and slow heat transfer of water-silver nano-fluid with varying volume fraction in a rectangular two-dimensional micro channel,” Indian J. Sci. Technol., vol. 8, no. 15, pp. 51707, 2015.
- M. Zadkhast, D. Toghraie, and A. Karimipour, “Developing a new correlation to estimate the thermal conductivity of mwcnt-cuo/water hybrid nanofluid via an experimental investigation,” J. Therm. Anal. Calorim, vol. 129, no. 2, pp. 859–867, 2017. DOI: https://doi.org/10.1007/s10973-017-6213-8.
- A. Aghanajafi, D. Toghraie, and B. Mehmandoust, “Numerical simulation of laminar forced convection of water-cuo nanofluid inside a triangular duct,” Phys. E: Low-Dimensional Syst. Nanostruct., vol. 85, pp. 103–108, 2017. DOI: https://doi.org/10.1016/j.physe.2016.08.022.
- Q. Gravndyan et al., “The effect of aspect ratios of rib on the heat transfer and laminar water/TiO2 nanofluid flow in a two-dimensional rectangular microchannel,” J. Mol. Liquids, vol. 236, pp. 254–265, 2017. DOI: https://doi.org/10.1016/j.molliq.2017.04.030.
- O. A. Akbari et al., “A modified two-phase mixture model of nanofluid flow and heat transfer in a 3-D curved microtube,” Advanced Powder Technol., vol. 27, no. 5, pp. 2175–2185, 2016b. DOI: https://doi.org/10.1016/j.apt.2016.08.002.
- H. Alipour, A. Karimipour, M. R. Safaei, D. T. Semiromi, and O. A. Akbari, “Influence of t-semi attached rib on turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional trapezoidal microchannel,” Phys. E: Low-Dimensional Syst. Nanostruct., vol. 88, pp. 60–76, 2017. DOI: https://doi.org/10.1016/j.physe.2016.11.021.
- M. R. Safaei, H. Togun, K. Vafai, S. N. Kazi, and A. Badarudin, “Investigation of heat transfer enhancement in a forward-facing contracting channel using fmwcnt nanofluids,” Numer. Heat Transfer, Part A: Appl., vol. 66, no. 12, pp. 1321–1340, 2014. DOI: https://doi.org/10.1080/10407782.2014.916101.
- M. Faridzadeh, D. S. Toghraie, and A. Niroomand, “Analysis of laminar mixed convection in an inclined square lid-driven cavity with a nanofluid by using an artificial neural network,” Heat Trans. Res., vol. 45, no. 4, pp. 361–390, 2014. DOI: https://doi.org/10.1615/HeatTransRes.2014007068.
- D. Toghraie, M. M. D. Abdollah, F. Pourfattah, O. A. Akbari, and B. Ruhani, “Numerical investigation of flow and heat transfer characteristics in smooth, sinusoidal and zigzag-shaped microchannel with and without nanofluid,” J. Therm. Anal. Calorim., vol. 131, no. 2, pp. 1757–1766, 2018. DOI: https://doi.org/10.1007/s10973-017-6624-6.
- M. M. Derakhshan and M. A. Akhavan-Behabadi, “Mixed convection of mwcnt–heat transfer oil nanofluid inside inclined plain and microfin tubes under laminar assisted flow,” Int. J. Thermal Sci., vol. 99, pp. 1–8, 2016. DOI: https://doi.org/10.1016/j.ijthermalsci.2015.07.025.
- M. Sheikholeslami, M. Gorji-Bandpy, and D. D. Ganji, “Effect of discontinuous helical turbulators on heat transfer characteristics of double pipe water to air heat exchanger,” Energy Conv. Manage., vol. 118, pp. 75–87, 2016. DOI: https://doi.org/10.1016/j.enconman.2016.03.080.
- R. Kamali and A. R. Binesh, “The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces,” Int. Commun. Heat Mass Transfer, vol. 35, no. 8, pp. 1032–1040, 2008. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2008.04.012.
- L. Pingan, Y. Gao, M. Hairong, and H. Liu, “Numerical simulation of heat transfer and resistance pattern in channels with different ribs,” 2010 International Conference on Computer Design and Applications, vol. 3, pp. V3–507. IEEE, 2010.
- M. Sheikholeslami, M. Jafaryar, Z. Said, A. I. Alsabery, H. Babazadeh, and A. Shafee, “Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach,” Appl. Thermal Eng., vol. 182, pp. 115935, 2021a. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115935.
- Y.-M. Chu, F. Salehi, M. Jafaryar, and Q.-V. Bach, “Simulation based on fvm for influence of nanoparticles on flow inside a pipe enhanced with helical tapes,” Appl. Nanosci., vol. 10, pp. 1–11, 2020.
- M. Sheikholeslami, S. A. Farshad, A. Shafee, and H. Babazadeh, “Performance of solar collector with turbulator involving nanomaterial turbulent regime,” Renewable Energy, vol. 163, pp. 1222–1237, 2021b. DOI: https://doi.org/10.1016/j.renene.2020.08.144.
- M. L. Levin and M. A. Miller, “Maxwell a treatise on electricity and magnetism,” Uspekhi Fizicheskikh Nauk, vol. 135, no. 11, pp. 425–440, 1981. DOI: https://doi.org/10.3367/UFNr.0135.198111d.0425.
- R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Ind. Eng. Chem. Fund, vol. 1, no. 3, pp. 187–191, 1962. DOI: https://doi.org/10.1021/i160003a005.
- A. Yurddaş, “Optimization and thermal performance of evacuated tube solar collector with various nanofluids,” Int. J. Heat Mass Transfer, vol. 152, pp. 119496, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119496.
- M. N. Labib, M. J. Nine, H. Afrianto, H. Chung, and H. Jeong, “Numerical investigation on effect of base fluids and hybrid nanofluid in forced convective heat transfer,” Int. J. Thermal Sci., vol. 71, pp. 163–171, 2013. DOI: https://doi.org/10.1016/j.ijthermalsci.2013.04.003.
- K. Bilen, M. Cetin, H. Gul and T. Balta, “The investigation of groove geometry effect on heat transfer for internally grooved tubes,” Appl. Thermal Eng., vol. 29, no. 4, pp. 753–761, 2009. DOI: https://doi.org/10.1016/j.applthermaleng.2008.04.008.
- G. Tanda, “Effect of rib spacing on heat transfer and friction in a rectangular channel with 45 angled rib turbulators on one/two walls,” Int. J. Heat Mass Transfer, vol. 54, no. 5–6, pp. 1081–1090, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.11.015.
- O. Manca, S. Nardini, and D. Ricci, “Numerical analysis of water forced convection in channels with differently shaped transverse ribs,” J. Appl. Math., vol. 2011, pp. 1–25, 2011. DOI: https://doi.org/10.1155/2011/323485.
- W. Peng, P.-X. Jiang, Y.-P. Wang, and B.-Y. Wei, “Experimental and numerical investigation of convection heat transfer in channels with different types of ribs,” Appl. Thermal Eng., vol. 31, no. 14–15, pp. 2702–2708, 2011. DOI: https://doi.org/10.1016/j.applthermaleng.2011.04.040.
- P. R. Chandra, C. R. Alexander, and J. C. Han, “Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls,” Int. J. Heat Mass Transfer, vol. 46, no. 3, pp. 481–495, 2003. DOI: https://doi.org/10.1016/S0017-9310(02)00297-1.
- D. N. Ryu, D. H. Choi, and V. C. Patel, “Analysis of turbulent flow in channels roughened by two-dimensional ribs and three-dimensional blocks. part II: Heat transfer,” Int. J. Heat Fluid Flow, vol. 28, no. 5, pp. 1112–1124, 2007. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2006.11.007.
- P. Liu and G. Ye, “Numerical simulation of fluid-solid coupled flowfield and heat transfer in a channel with square ribs,” in 2009 International Conference on Computational Intelligence and Software Engineering, pp. 1–5. IEEE, 2009.
- N. Massarotti, P. Nithiarasu, O. Manca, S. Nardini, and D. Ricci, “Numerical investigation of air forced convection in channels with differently shaped transverse ribs,” Int. J. Numer. Methods Heat Fluid Flow, vol. 21, pp. 618–639, 2011.
- A. P. Rallabandi, D.-H. Rhee, Z. Gao and J.-C. Han, “Heat transfer enhancement in rectangular channels with axial ribs or porous foam under through flow and impinging jet conditions,” Int. J. Heat Mass Transfer, vol. 53, no. 21–22, pp. 4663–4671, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.027.
- J.-M. Buchlin, “Convective heat transfer in a channel with perforated ribs,” Int. J. Thermal Sci., vol. 41, no. 4, pp. 332–340, 2002. DOI: https://doi.org/10.1016/S1290-0729(02)01323-6.
- A. Behnampour, et al., “Analysis of heat transfer and nanofluid fluid flow in microchannels with trapezoidal, rectangular and triangular shaped ribs,” Phys. E: Low-Dimensional Syst. Nanostruct., vol. 91, pp. 15–31, 2017. DOI: https://doi.org/10.1016/j.physe.2017.04.006.
- F. H. Ahmed, A. Kamel and S. A. Jawad, “Experimental determination of the optimal location and contraction of sedimentation tank baffles,” Water, Air, Soil Pollution, vol. 92, no. 3, pp. 251–271, 1996.
- O. A. Akbari, D. Toghraie, A. Karimipour, A. Marzban and G. R. Ahmadi, “The effect of velocity and dimension of solid nanoparticles on heat transfer in non-newtonian nanofluid,” Phys. E: Low-Dimensional Syst. Nanostruct., vol. 86, pp. 68–75, 2017. DOI: https://doi.org/10.1016/j.physe.2016.10.013.
- R. Sarlak, S. Yousefzadeh, O. A. Akbari, D. Toghraie, S. Sarlak, et al., “The investigation of simultaneous heat transfer of water/Al2O3 nanofluid in a close enclosure by applying homogeneous magnetic field,” Int. J. Mech. Sci., vol. 133, pp. 674–688, 2017. DOI: https://doi.org/10.1016/j.ijmecsci.2017.09.035.
- M. Parsaiemehr, F. Pourfattah, O. A. Akbari, D. Toghraie, and G. Sheikhzadeh, “Turbulent flow and heat transfer of water/Al2O3 nanofluid inside a rectangular ribbed channel,” Phys. E: Low-Dimensional Syst. Nanostruct., vol. 96, pp. 73–84, 2018. DOI: https://doi.org/10.1016/j.physe.2017.10.012.
- Y. F. Li, G. D. Xia, D. D. Ma, Y. T. Jia, and J. Wang, “Characteristics of laminar flow and heat transfer in microchannel heat sink with triangular cavities and rectangular ribs,” Int. J. Heat Mass Transfer, vol. 98, pp. 17–28, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.022.
- R. S. Vajjha and D. K. Das, “Experimental determination of thermal conductivity of three nanofluids and development of new correlations,” Int. J. Heat Mass Transfer, vol. 52, no. 21–22, pp. 4675–4682, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.027.
- R. S. Vajjha, D. K. Das, and D. P. Kulkarni, “Development of new correlations for convective heat transfer and friction factor in turbulent regime for nanofluids,” Int. J. Heat Mass Transfer, vol. 53, no. 21–22, pp. 4607–4618, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.06.032.
- M. Corcione, “Heat transfer features of buoyancy-driven nanofluids inside rectangular enclosures differentially heated at the sidewalls,” Int. J. Thermal Sci., vol. 49, no. 9, pp. 1536–1546, 2010. DOI: https://doi.org/10.1016/j.ijthermalsci.2010.05.005.
- H. L. I. V. John, I. V. Lienhard, and V. Lienhard, A Heat Transfer Textbook. Cambridge: Phlogiston Press, 2008.