References
- Bandosz, J., and Block, K. 2006. Effect of pyrolysis temperature and time on catalytic performance of sewage sludge/industrial sludge-based composite adsorbents, Appl. Catal., B 67:77–85.
- Domínguez, A., Menéndez, J. A., Inguanzo, M., and Pis, J. J. 2006. Production of bio-fuels by high temperature pyrolysis of sewage sludge using conventional and microwave heating. Bioresour. Technol. 97:1185–1193.
- Fang, L., Tian, Y., Wu, W. N., and Cao, C. Y. 2008. Characteristic study of the solid liquid and gas produced by microwave pyrolysis of sewage sludge. J. Saf. Environ. 8:29–33 (in Chinese).
- Gao, X. W., Shan, C. X., Li, H. Y., Hao, J. X., and Gao, H. M. 2007. The effect of temperature on sludge pyrolysis products and the relevant characteristics. Ecol. Environ. 16:1189–1192 ( in Chinese).
- Hwang, I. H., Ouchi, Y., and Matsuto, T. 2007. Characteristics of leachate from pyrolysis residue of sewage sludge. Chemosphere 68:1913–1919.
- Li, H. Y., Zhang, S. T., and Zhao, X. H. 2006. Influence of pyrogenation temperature of sewage sludge on product distribution. Acta Energ. Solaris Sin. 27:835–840 ( in Chinese).
- Luo, Z. Y., Zhang, X. D., Zhou, J. S., Ni, M. J., and Cen, K. F. 2004. Experimental study on catalytic and thermal cracking of tar from biomass pyrolysis. J. Chem. Eng. Chin. Univ. 8:162–167 ( in Chinese).
- Scott, S. A., Dennis, J. S., Davidson, J. F., and Hayhurst, A. N. 2006. Thermogravimetric measurements of the kinetics of pyrolysis of dried sewage sludge. Fuel 85:1248–1253.
- Wang, Y., Zhang, S. T., and Zhang, Y. F. 2005. Gas formation characteristics during low temperature pyrolysis of municipal household garbage. J. Fuel Chem. Technol. 33:62–65 ( in Chinese).
- Yang, X. C., Wei, Y. N., and Li, W. J. 2007. Research progress of catalysts for tar cracking. Chem. Ind. Eng. Prog. 26:326–330 ( in Chinese).
- Zhou, J. S., Liu, Y. J., Luo, Y. Z., and Cen, K. F. 2005. Effects of solid acid and alkali catalysts on catalytic cracking of biomass tar. J. Zhejiang Univ. 39:1047–1051 ( in Chinese).