References
- Ahmad, F., Wau Daud, W. M. A., Ahmad, M. A., and Radzi, R. 2013. The effects of acid leaching on porosity and surface functional groups of cocoa (Theabroma cacao) shell based activated carbon. Chem. Eng. Res. Des. 91:1028–1038.
- Ayrılmış, N., and Kaymakçı, A. 2013. A Fast prowing biomass as reinforcing filler in thermoplastic composites: Paulownia elongota wood. Ind. Crop. Prod. 43:457–64.
- Budinova, T., Ekinci, E., Yardım, F., Grimm, A., Björnbom, E., Minkova, V., and Goranova, M. 2006. Characterization and application of activated carbon produced by H3PO4 and water vapor activation. Fuel Process Technol. 87:899–905.
- Chilton, N., Marshall, W. E., Rao, R. M., Bansode, R. R., and Losso, J. N. 2013. Activated carbon from pecan shell: Process description and economic analysis. Ind. Crop. Prod. 17:209–217.
- Danish, M., Hashim, R., Ibrahim, M. N. M., and Sulaiman, O. 2013. Effect of acidic activating agents on surface area and surface functional groups of activated carbons produced from Acacia Mangium wood. J. Anal. Appl. Pyrol. 104:418–425.
- Dominguez, J. M. G., Gonzáles, C. F., Franco, M. A., Casaos, A. A., and Serrano, V. G. 2011. The influence of the impregnation method on the yield of activated carbon produced by H3PO4 activation. Mater. Lett. 65:1423–1426.
- Idriss, A. O., Stitou, M., Correa, E. M. C., Gonzáles, C. F., and García, A. M. 2011. Preparation of activated carbons from olive tree wood revisited I. Chemical activation with H3PO4. Fuel Process Technol. 92:261–265.
- Liou, T. H. 2010. Development of mesoporous structure and high adsorption capacity of biomass-based activated carbon by phosphoric acid and zinc chloride activation. Chem. Eng. J. 158:129–142.
- López, F. A., Centeno, T. A., Diáz, I. G., and Alguacil, F. J. 2013. Textural and fuel characteristics of the chars produced by the pyrolysis of waste wood, and the properties of activated carbons prepared from them. J. Anal. Appl. Pyrol. 104:551–558.
- López, F., Pérez, A., Zamudio, M. A. M., De Alva, H. E., and García, J. C. 2012. Paulownia as raw material for solid bio fuel and cellulose pulp. Biomass Bioenergy 45:77–86.
- Lua, A. C., Lau, F. Y., and Guo, J. 2006. Influence of pyrolysis conditions on pore development of oil-palm shell activation carbons. J. Anal. Appl. Pyrol. 76:96–102.
- Martinez de Yuso, A., Rubio, A., and Izquiardo, B. 2014. Influence of activation atmosphere used the chemical activation of almond shell on the characteristics and adsorption performance of activated carbons. Fuel Process Technol. 119:74–80.
- Stavropoulos, G. G., and Zabaniotou, A. A. 2009. Minimizing activated carbons production cost. Fuel Process Technol. 90:952–957.
- Yorgun, S., Vural, N., and Demiral, H. 2009. Preparation of high surface area activated carbons from Paulownia wood by ZnCl2 activation. Micropor. Mesopor. Mater. 122:189–194.
- Zhu, X. L., Wang, P. Y., Peng, C., Yang, J., and Yan, X. B. 2014. Activated carbon produced from Paulownia sawdust for high-performance CO2 sorbents. Chin. Chem. Lett. 25:929–932.
- Zuo, S., Yang, J., Liu, J., and Cai, X. 2009. Significance of the carbonization of volatile pyrolysis products on the properties of activated carbons from phosphoric acid activation of lignocellulosic material. Fuel Process Technol. 90:994–1001.