544
Views
46
CrossRef citations to date
0
Altmetric
Research Article

Conversion of waste tires to liquid products via sodium carbonate catalytic pyrolysis

, & ORCID Icon

References

  • Aburas, H., Bafail, A., and Demirbas, A. 2015. Pyrolizing of waste lubricating oil (WLO) into diesel fuel over supported calcium oxide additive. Pet. Sci. Technol. 33:226–236.
  • Charpenteau, C., Seneviratne, R., George, A., Millan, M., Dugwell, D. R., and Kandiyoti, R., 2007. Screening of low cost sorbents for arsenic and mercury capture in gasification systems. Energy Fuels 21:2746–27.
  • Chen, J. H., Chen, K. S., and Tong, L. Y. 2001. On the pyrolysis kinetics of scrap automotive tires. J. Hazard. Mater. 84:43–55.
  • Chianu, J. N., Atobatele, J. T., and Akintola, J. O. 2001. A comparative analysis of labour productivity in cassava/maize production systems in South Western Nigeria. J. Niger. Agric. Dev. Stud. 1:97–109.
  • Demirbas, A. 2005. Recovery of chemicals and gasoline-range fuels from plastic wastes via pyrolysis. Energy Sour. 27:1313–1317.
  • Demirbas, A. 2008. Gasoline like fuel from waste engine oil via catalytic pyrolysis. Energy Sour. Part A 30:1433–1441.
  • Demirbas, M. F. 2015. Global fossil energy policy. Energy Educ. Sci. Technol D 7:1–14.
  • Demirbas, A., Balubaid, M. A., Kabli, M., and Ahmad W. 2015. Diesel fuel from waste lubricating oil by pyrolitic distillation. Petrol. Sci. Technol. 33:129–138.
  • Fernández, A. M., Díez, M. A., Alvarez, R., and Barriocanal, C. 2009. Pyrolysis of tire wastes. 1st Spanish National Conference on Advances in Materials Recycling and Eco – Energy, S01-2, 12–13, Madrid, November.
  • Giroh, D. Y., and Adebayo, E. F. 2009. Analysis of the technical in efficiency of rubber tapping in Rubber Research Institute of Nigeria. J. Hum. Ecol. 27:171–174.
  • Giroh, D. Y., Ephraim, I. J., Nudamatiya, A. B. 2007. Resource use efficiency in rubber tapping in the rubber belt of Nigeria. J. Sustainable Trop. Agric. Res. 23:30–35.
  • Giroh D. Y., Joyce, D. M., and Korieocha, J. N. 2012a. A probit analysis of the propensity to adopt improved rubber clones among small holder farmers in Southern Nigeria. NY. Sci. J. 5:104–107.
  • Giroh D. Y., Adebayo, E. F., and Jongur, A. A. U. 2012b. Analysis of labour productivity and constraints of rubber latex exploitation among smallholder rubber farmers in the Niger Delta region of Nigeria. Global J. Agric. Res. 1:16–26.
  • Guchhait, S., Biswas, D., Bhattacharya, P., and Chowdhury, R. 2005. Bio-desulfurization of model organo-sulfur compounds and hydrotreated diesel—Experiments and modeling. Chem. Eng. J. 112:145–151.
  • Helleur, R., Popovic, N., Ikura, B. Y., Stanciulescu, M., and Liu, D. 2001. Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires. J. Anal. Appl. Pyrolysis 58–59:813–824.
  • IRSG. 2015. International Rubber Study Group (IRSG). Singapore, February 2.
  • Islam, M. R., Haniu, H., and Beg, M. R. 2008. Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: Product yields, compositions and related properties. Fuel 87:3112–3122.
  • Kyari, M., Cunliffe, A., and Williams, P. T. 2005. Characterization of oils, gases, and char in relation to the pyrolysis of different brands of scrap automotive tires. Energy Fuels 19:1165–1173.
  • Lázaro, M. J. L., Moliner, R., Domeño, C., and Nerín, C. 2001. Low-cost sorbents for demetalisation of waste oils via pyrolysis. J. Anal. Appl. Pyrolysis 57:119–131.
  • Lázaro, M. J. R., Moliner, R., Suelves, I., Domeño, C., and Nerín, C. 2002. Co-pyrolysis of a mineral waste oil/coal slurry in a continuous-mode fluidized bed reactor. J. Anal. Appl. Pyrolysis 65:239–252.
  • Leung, D. Y. C., Yin, X. L., Zhao, Z. L., Xu, B. Y., and Chen, Y. 2002. Pyrolysis of tire powder: Influence of operation variables on the composition and yields of gaseous product. Fuel Proc. Technol. 79:141–155.
  • Mastral, A. M., Murillo, R., Callén, M. S., García T., and Snape, C. E. 2000. Influence of process variables on oils from tire pyrolysis and hydropyrolysis in a swept fixed bed reactor. Energy Fuels 14:739–744.
  • Merchant, A. A., and Petrich, M. A. 1993. Pyrolysis of scrap tires and conversion of chars to activated carbon. AICHE J. 1370–1376.
  • Omokhafe, K. O., and Nasiru, I. 2004. Polygene inheritance for latex yield in Hevea brasiliensis. Muell Arg. Plant Genet. Resour. Newslet. 140:48–50.
  • Pushparaja, E. 1983. Problems and potential for establishing Hevea under difficult environmental conditions. Planter 59:242–251.
  • Quek, A., and Balasubramanian, R. 2011. Preparation and characterization of low energy post-pyrolysis oxygenated tire char. Chem. Eng. J. 170:194–201.
  • Rodrigo, V. H. L., Silva, T. U. K., and Munusinghe E. S. 2004. Improving the spatial arrangement of planting rubber (Hevea brasiliensis Muell Arg.) for long-term intercropping. Field Crops Res. 89:327–335.
  • Roy, C., Chaala, A., and Darmstadt, H. 1999. Vacuum pyrolysis of used tires end-uses for oil and carbon black products. J. Anal. Appl. Pyrolysis 51:201–221.
  • Vijayaram, T. R. 2009. A technical review on rubber. Int. J. Design Manufact. Technol. 3:25–37.
  • Williams, P. T., and Brindle, A. J. 2003. Aromatic chemicals from the catalytic pyrolysis of scrap tyres. J. Anal. Appl. Pyrolysis 67:143–164.
  • Yesufu, M. T. 2000. The Human Factor in National Development in Nigeria. Abuja, Kaduna: Spectrum Books Ltd.
  • Zabaniotou, A. A., and Stavropoulos, G. 2003. Pyrolysis of used automobile tires and residual char utilization. J. Anal. Appl. Pyrolysis 70:711–722.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.